General Pump 100295 Series 100 Oil, 16 oz. Bottle. General Industrial Oil is a premium multi-purpose lubrication formulated to protect against rust and oxidation. It offers long service life and prevents sludge and varnish formation, even at high temperatures

Features:
• General Industrial Oil possesses a high natural viscosity index. This means more constant operating characteristics over wide temperature range
• Recommended for use in General Pump crankcases on systems requiring less than 25 BHP. Initial oil change after break-in period between 50 and 100 hours. Then every three months of 300 hours of operation thereafter. Check oil level in crankcase daily or before each use.
• Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance

Specifications:
• Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston and plunger pumps
• Resists foaming and aeration
• Highly resistant to oxidation that would result in sludge formation
• Resistas formation of harmful oil water emulsions
• Compatible with typically used seals and gaskets
• High viscosity index (IV) means more constant operating characteristics over wide temperature ranges
• Low pour point assures fluid flow during cold weather operation
• Outstanding thermal and hydrolytic stability assures long oil life
• Exceeds wear prevention requirements of all major hydraulic pump manufactures
• Packaged in one 16 oz bottle
• Weight: 1 lbs

Features
• High Quality, German engineered components
• Horizontal flow-through design
• Forged brass housing for maximum strength
• Unitized valve for easy repair
• Stainless steel spring, needle, ball, and seat for chemical resistance
• Special heat and chemical resistant seals for optimum performance even in the harshest of environments

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 320° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.16 lb

New Design Features:
• Interior Design – more efficient flow and operation
• Dual Locking Nuts – vibration resistant for setting maximum pressures
• New Spring Material – more resistant to fatigue, powder paint resists rusting
• Piston – large diameter, more strength and contact area for shifting alignment
• Discharge Nipple – sealing o-ring has been moved to the lower part of the thread, increases hydro strength and fitting strength
• Shutter Valve – hex design, less contact area for smooth shifting (prevents binding). larger size, longer life and more positive shifting

Featuring:
• Over sized handle – easier adjustment
• Forged valve body – excellent strength
• Two inlet ports
• Two by-pass ports
• Ultra thick inlet and discharge ports - added strength
• Color coded springs and caps – easy valve identification
• All ports are FNPT

Specifications:
• Spring Color: Black:
• Replaces AL607 & AL607X
• Maximum Pressure: 4,495 PSI
• Max. Volume: 8.0 GPM
• Adjustable pressure
• Brass valve body
• Max. Fluid Temp.: 194° F.
• Inlet Ports (2): 3/8" FNPT
• Discharge Ports (1): 3/8” FNPT
• Bypass Ports (2): 3/8” FNPT
• Weight: 29.6 oz