We accept

Checkout

0
menu
See All 32 items
Picture of Suttner ST-1700 Trigger Gun 5,000 PSI 10.5 GPM LFT, Ergonomic Design

Suttner ST-1700 Trigger Gun 5,000 PSI 10.5 GPM LFT, Ergonomic Design

SKU: 201700610

Brand: Suttner America

$31.01

QTY:
ADD TO CART
ADD TO WISHLIST
Product Description


Suttner ST-1700 5,000 PSI 10.5 GPM LFT. Ergonomic Design Ideal for Smaller Hands Spray Gun


Features
• High Quality, Made In Germany
• Comfortable grip and reduces fatigue for longer working hours
• This unique design reduces wear to a minimum on the internal components
• Great choice for hot and cold pressure washer use
• Perfect gun for smaller hand operators
• Same inlet & outlet angles as our ST-1500 & ST-2000 spray guns
• LFT (Low Friction Trigger) this gun’s trigger system incorporates a ball between the trigger and piston rod contact area that rolls when triggered resulting in a much easier opening and holding
• 30% less vibration transfer than standard trigger guns when being used with turbo nozzles, telescopic lanes, sand blasters, etc
• Requires about 13% less squeeze force than a standard trigger gun to open and hold the trigger. In addition, it has less force while spraying due to the optimum hand position


Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 10.4 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.05 lb

 WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.

Customers who bought this item also bought
Picture of 3/8" x 2' Grey 6,000 PSI Pressure Washer Jumper Hose

3/8" x 2' Grey 6,000 PSI Pressure Washer Jumper Hose

SKU: 9895B9024

Propulse 6,000 PSI Grey “mark-less” 2' jumper hose. This grey jumper hose can be used as a bypass hose from unloader to pump, connector / whip hose from pump to heater coil, heater coil to outlet and for connecting pressure washer to a hose reel. Also is an ideal connector hose for carwash self service bays and pump room.


Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 2’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 1.00 lbs

  Price: $11.40
Picture of GP High Draw 20% Fixed Chemical Injector MxM #2.3

GP High Draw 20% Fixed Chemical Injector MxM #2.3

SKU: 100776


General Pump #2.3mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer


Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs


Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

  Price: $11.21
Picture of GP High Draw 20% Fixed Chemical Injector MxM #2.1

GP High Draw 20% Fixed Chemical Injector MxM #2.1

SKU: 100775


General Pump #2.1mm Fixed Chemical Injector, High Draw, Chemical Draw 20% with 3/8" NPT-M. This 20% fixed flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer


Features
• 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs


Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

  Price: $11.90
Picture of 3/8" x 4' Grey 6,000 PSI Pressure Washer Jumper Hose

3/8" x 4' Grey 6,000 PSI Pressure Washer Jumper Hose

SKU: 9895B9048

Propulse 6,000 PSI Grey “mark-less” 4' jumper hose. This grey jumper hose can be used as a bypass hose from unloader to pump, connector / whip hose from pump to heater coil, heater coil to outlet and for connecting pressure washer to a hose reel. Also is an ideal connector hose for carwash self service bays and pump room.


Features:
• Suitable for cold and hot water commercial pressure cleaning applications
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line in grey “mark-less” cover color
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 4’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey, “mark-less”
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Weight 1.45 lbs

  Price: $15.32
ft_logo power equipment and supply

Copyright © 2025 PWMall.com. All Rights Reserved.

877-979-6255

Powered by nopCommerce