12 V Diaphragm Pumps

• Fimco 12 Volt On/Off Wireless Remote Control
• Extended Wireless Range
• Convenient Keychain Clip
• Quick Connect Into FIMCO Products Or Wire Into All 12 Volt Products Up To 20 Amps
• Remote has Collapsible Antennae & Button Cover
• Rear View Showing Power In and Power Out Hookups
• Weight: 0.35 lbs

Fimco 2.1 GPM 60 PSI Gold Series 5277995/5275814 High-Flo Duplex 12 Volt Diaphragm Pump with Internal Bypass and 3/8" FPT (Threaded) Ports. Replacement pump for spot sprayers, liquid fertilizer units, planters or back up water systems. Can also be used for potable water. Ready for Roundup®

Features:
• RELIEF VALVE MODELS have pressure controlled by an internal relief valve, and run continuously unless electric current is turned off
• Diaphragm design eliminates troublesome shaft seal
• Pump can be run indefinitely without damage
• Ball bearing drive - assures longer pump life
• Excellent self-priming capability
• Santoprene diaphragms and viton valves are standard
• Maximum temperature of pumped liquid 130°F
• Permanent magnet motor - long life brushes
• Fuse protected
• Built-in cooling fan

Specifications:
• Voltage: 12 VDC 8 AMPS Max
• Max Flow: 2.1 GPM
• Max Pressure: 60 PSI
• Ports(2): 3/8” Female NPT
• Two Pin Connector: 6” Long
• Fimco Box #: 5275814
• Fimco Pump #: 5277995
• DO NOT USE With Flammable Or Combustible Liquids
• Packaging: Small box
• Weighs 3.15 lbs

Fimco 5277995/5275814 Pump Breakdown

Delavan 7870-101E-SB PowerFLO™ FB2 Series 7.0 GPM 60 PSI Diaphragm Pump with 1/2” FNPT Ports. Demand Switch – Operates only when liquid flow is required.

Features:
• The FB2 pumps are heavy duty 12V, 7 GPM pumps with Santoprene diaphragms and Santoprene valves
• These FB2 5 chamber pumps are smooth running, and can run dry, and self-prime
• The pumps feature popular threaded NPTF ports, along with a heavy duty demand system to turn the pump off when not in use, saving pump life and saving energy
• The FB2 pumps are known for one of the highest flow rates in the 12V market
• The FB2 pumps are used in difficult applications such as roof cleaning, and de-icing
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 12 AWG, 12” long
• Max Amps (60 PSI): 17
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene Glass Filled
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 7.0 GPM
• Pressure Shut-Off: 60 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 9.75 lbs