Electric Clutch, Flange & Couplers, Gear Boxes

Mounting Plate; Clutch - Replaces AR-CLMP

AR Kit: Clutch Mount XM Series. Note: Replaces AR-CLMP

AR Kit: Clutch Mount RK Series. Note: Replaces AR-CLMP

General Pump ZFWWU Flange For NEMA-C Electric Motors 56C Frame (TT/TP Series 51 Pumps)

Specifications:
• Material: Heavy-duty cast aluminum
• Pump Series: TT/TP 51 Series
• Motor Frame: NEMA-C Electric 56C
• Motor Rating: 3-1/2 to 8 HP
• Weight: lb.

XW series gear boxes designed to safely connect pumps and power supplies that operate at different speeds. Gear boxes fit into 1” and 1-1/8” shafts. They feature on SAEJ609A flange for proper connections

Specifications
• Pump Series: XW
• Reduction: 1:2.24
• Flange Size: 1"
• Flange Type: SAEJ609a
• Pump RPM: 1,450

General Pump YGR1000P Gear Reducer for 2.2 to 1, 1″ Shafted Engines, Up to 24 HP, J609A Flange, 47, 47SS and 66 Series pumps

Features:
• Compact and lightweight
• Hardened steel helical gears for quiet operation
• Oil bath lubrication
• Dual bearing design for extended life
• J609a Flange mounts to most gasoline engines

Specifications:
• Horse Power: 18 - 24
• Drive Ratio: 2.176:1
• Maximum Pump Speed: 1,450 RPM
• Oil Capacity: 10 Oz
• Oil Grade: SAE90 Gear Lube
• Input (motor) Shaft Ø": 1”
• Output (pump) Shaft Ø": 24 mm
• Motor Flange (SAE): J609A
• Pump Flange: Fits 47, 47SS and 66 Series General Pump
• Weight: 5.8 lb.

Specifications
• Electric clutch for AR XM, RK & XW series pumps
• 12 Volt double groove clutch
• Size: 24mm x 7"
• Works with "A" section belts
• Use with AR-CLMP clutch mounting plate below

The AR North America CL Series electric clutch enables operation of the drive system for your pump without the pump itself being engaged. There can be significant reduction in wear and tear on the pump since it is only operating when called for

Specifications
• Electric clutch for AR XM, RK & XW series pumps
• 12 Volt single groove clutch
• Size: 24mm
• Works with "A" section belts
• Use with AR-CLMP clutch mounting plate below
• Replaces CL-521491

General Pump ZGRS1000 Gear Reducer for 2.2 to 1, 1″ Shafted Engines, Up to 25 HP, J609A Flange, 47 and 66 Series pumps

Features:
• Eliminates need for belts and pulleys. Saves time and money
• Compact design for easier enclosure. Reduced size of mounting base
• Oversized bearing system is self-aligning. Reduces load on motor bearings and pump bearings
• Self-contained lubrication system Uses 90W gear lube for quiet, long life operation. Protects pump from failure due to gearbox oil loss. Protects gearbox from failure due to oil loss in pump
• Large, helical cut, hardened steel gears for quiet, long life operation
• Large capacity crankcase
• Reversible mounting for right or left hand drive gas engines. Includes reversible dipstick and oil level sight glass
• Model ZGRS1000 for a 1” keyed shaft

Specifications:
• Maximum BHP (Engine HP): 25
• Maximum Engine RPM: 3,600
• Reduction Ratio: 1:2.2
• Maximum Pump Speed: 1,450 RPM
• Oil Capacity (SP Industrial Pump Oil Series 220): 9.47 Oz
• Fits Engine Shaft Diameter: 1”
• Fits General Pump Models: 47 Series (1450 RPM Versions) 66 Series (1450 RPM Versions)
• Weight: 9.26 lb.

General 540 RPM PTO, 1 3/8" Spline Shaft, up to 10 HP Pumps (47 and 66 Series)

Features:
• Fits all standard American tractor engines with 540 RPM power takeoff, 1-3/8” spline shaft
• Handles pumps requiring up to 10 BHP
• Self-contained lubrication system. Uses 90W gear lube for quiet, long life operation
• Large, helical cut, hardened steel gears for quiet, long life operation
• Reversible mounting for right or left hand drive gas engines. Includes reversible dipstick and oil level sight glass

Specifications:
• Maximum BHP: 10.0
• Maximum Input RPM: 550
• Multiplier Ratio: 1:1.9
• Output Shaft Diameter: 1.375”
• Fits General Pump Models: T811, T821, T921, T1001, T1011, T1021, T1311, T1321, T1511, T1621, T2011
• Weight: 9.50 lb.