Fairview USA Inc.

Fairview 726-8C 1/2 Hose ID x 3/8 Female Pipe Brass Grip-Tite Fitting. Grip-Tite Push-On style brass hose barbs are recommended for general purpose air, fuel, lube, Oil Lines, water and other low pressure applications. CA360 brass

Specifications:
• Working Pressure: 300 PSI
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• When used with Grip-Tite or similar push-on hose, no clamps are needed
• Weight: 0.08 lbs

Accutek® S1099-CB Steel 90° Elbow 3/8 Male Pipe x 1/4 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 4,000 PSI
• Burst Pressure: 16,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.20 lbs

Fairview SR525-6C 3/8 ID x 3/8 Male Pipe Steel Reusable Hose End for use with S.A.E. 100R5 (NON-SKIVE) hose

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Steel Reusable Hose Ends for use with S.A.E. 100R5 (NON-SKIVE) hose
• Medium pressure service in the handling of most hydraulic fluids, gasoline, diesel fuels, lubricating oils and water
• Working Temperature: -40°F to +250°F, -40°C to +121°C
• Working Pressure: Are hose size dependent

Fairview GAS-FLO™ BV2103-B 1/4" FPT Forged Brass Ball Valve 600 WOG, 150 WSP. Fairview's Forged Brass Ball Valves are full port and CSA, CGA & UL certified

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• Brass valves for use in W.O.G. = Water, Oil and Gas; W.S.P. = Working Steam Pressure applications
• Two piece Body
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA - ANSI Z21.15/CGA 9.1, ASME B16.44, CGA CR 91-00
• CAN/CGA 3.16, ASME B16.33 & ASME B16.38
• UL 842 (MHKZ): Manual valves-250 psi

Specifications:
• W.O.G: 600
• W.S.P: 150
• Pipe Size: 1/4” FPT
• Connection Type: Female to Female
• Materials: Brass C3700, Chrome & Nickel Plated Steel, PTFE
• Weight: 0.16 lbs

Accutek® QD-ISOBN4-4F 1/4 Nipple x 1/4 Female Pipe ISO Series B 7241-1 Steel 5,000 PSI Quick Disconnect. Fairview's ISO B Interchange Couplers Interchange with Aeroquip FD45, Foster FHK, Parker 60, Safeway BS10 and Faster HNV Series

Features:
• High flow characteristics and pressure ratings superior to Parker 60 series
• Industry interchangeability with other manufacturer's ISO "B" couplers and nipples
• Poppet style double shut-off.
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Ideal for use with hydraulic and other fluids in both stationary and mobile industrial applications

Specifications:
• Working Pressure: 5,000 PSI
• Body Size: 1/4
• Female Pipe: 1/4
• Body Material: Steel
• Approx. Weight: 0.08 lbs

Fairview GAS-FLO™ BV2103-C 3/8" FPT Forged Brass Ball Valve 600 WOG, 150 WSP. Fairview's Forged Brass Ball Valves are full port and CSA, CGA & UL certified

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• Brass valves for use in W.O.G. = Water, Oil and Gas; W.S.P. = Working Steam Pressure applications
• Two piece Body
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA - ANSI Z21.15/CGA 9.1, ASME B16.44, CGA CR 91-00
• CAN/CGA 3.16, ASME B16.33 & ASME B16.38
• UL 842 (MHKZ): Manual valves-250 psi

Specifications:
• W.O.G: 600
• W.S.P: 150
• Pipe Size: 3/8” FPT
• Connection Type: Female to Female
• Materials: Brass C3700, Chrome & Nickel Plated Steel, PTFE
• Weight: 0.31 lbs

Accutek® S1099-D Steel 90° Elbow 1/2 Male Pipe x 1/2 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.28 lbs

Accutek® S1003-D Steel Female Hex Coupling 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.23 lbs

Fairview 1925-6B 3/8 Hose ID x 1/4 Male Pipe Brass Working Swivel Hose Barb Fitting. Brass hose barbs are recommended for general purpose air, water and other low pressure applications. CA360 brass construction prevents rust and corrosion

Specifications:
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• All hose barbs must be firmly fastened with hose clamps or ferrules
• Weight: 0.07 lbs

Fairview 34-6 3/8 Tube OD x 3/8 Tube OD Brass Tube Coupling Swivel with Forged Nuts. Fairview's Brass Tube Coupling Swivel SAE 45° Flare Fittings are ideal for use with LP-Gas, Natural Gas, Refrigeration, Gasoline and more

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Used with Copper, aluminum, and Welded Steel Hydraulic Tube that can be flared
• Working Pressure: 1,000 PSI
• Material: Brass
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Weight: 0.12 lbs

Fairview X100-C 3/8 FPT Extruded Brass 90° Elbow. Fairview's Extruded 90° Elbow Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas, LP-Gas to 1,200 PSI WP

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Extruded brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.18 lbs

Accutek® S1016-BC Steel 90° Street Elbow 1/4 Male Pipe x 3/8 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 4,000 PSI
• Burst Pressure: 16,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.21 lbs

Fairview 101M-B 1/4 MPT x 1/4 MPT x 1/4 MPT Forged Brass Male Tee. Fairview's Forged Male Tee Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 15,000 PSI
• Material: Forged Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.07 lbs

Fairview GAS-FLO™ BV5046-6D 3/8" Flare Tube to 1/2” FPT Forged Full Port Brass Ball Valve 600 WOG. Fairview's Brass Flare To Female Pipe Gas Cocks are CSA certified and built specially for use with Stationary Appliance Connectors

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• For Indoor/Outdoor applications. C.S.A. Certified forged brass ball valves for Natural and Propane Gas (vapor)
• Brass valves for use in W.O.G. = Water, Oil and Gas 
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA certified to 5 P.S.I. FROM APPLIANCE TO METER

Specifications:
• W.O.G: 600
• Flare Tube Size: 3/8”
• Pipe Size: 1/2” FPT
• Connection Type: Flare Tube to Female
• Materials: Aluminum, Brass, NBR, PTFE, Steel
• Operating temperature: -40°F to +125°F (-40°C to +52°C)
• Weight: 0.24 lbs

Fairview 34-4 1/4 Tube OD x 1/4 Tube OD Brass Tube Coupling Swivel with Forged Nuts. Fairview's Brass Tube Coupling Swivel SAE 45° Flare Fittings are ideal for use with LP-Gas, Natural Gas, Refrigeration, Gasoline and more

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Used with Copper, aluminum, and Welded Steel Hydraulic Tube that can be flared
• Working Pressure: 1,400 PSI
• Material: Brass
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Weight: 0.08 lbs

Accutek® S1003-ED Steel Female Hex Coupling 3/4 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 2,500 PSI
• Burst Pressure: 10,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.38 lbs

Accutek® QD-ISOBN6-6F 3/8 Nipple x 3/8 Female Pipe ISO Series B 7241-1 Steel 4,350 PSI Quick Disconnect. Fairview's ISO B Interchange Couplers Interchange with Aeroquip FD45, Foster FHK, Parker 60, Safeway BS10 and Faster HNV Series

Features:
• High flow characteristics and pressure ratings superior to Parker 60 series
• Industry interchangeability with other manufacturer's ISO "B" couplers and nipples
• Poppet style double shut-off.
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Ideal for use with hydraulic and other fluids in both stationary and mobile industrial applications

Specifications:
• Working Pressure: 4,350 PSI
• Body Size: 3/8
• Female Pipe: 3/8
• Body Material: Steel
• Approx. Weight: 0.15 lbs

Accutek® S1020-DC Steel Adapter 1/2 Female Pipe x 3/8 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.25 lbs

Fairview GAS-FLO™ BV5048-6D 3/8" Flare Tube to 1/2” MPT Forged Full Port Brass Ball Valve 600 WOG. Fairview's Brass Flare To Female Pipe Gas Cocks are CSA certified and built specially for use with Stationary Appliance Connectors

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• For Indoor/Outdoor applications. C.S.A. Certified forged brass ball valves for Natural and Propane Gas (vapor)
• Brass valves for use in W.O.G. = Water, Oil and Gas 
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA certified to 5 P.S.I. FROM APPLIANCE TO METER

Specifications:
• W.O.G: 600
• Flare Tube Size: 3/8”
• Pipe Size: 1/2” MPT
• Connection Type: Flare Tube to Male
• Materials: Aluminum, Brass, NBR, PTFE, Steel
• Operating temperature: -40°F to +125°F (-40°C to +52°C)
• Weight: 0.26 lbs

Fairview 54-5A 5/16 Tube OD x 1/8 Male Pipe Brass 45° Elbow. Fairview's Forged Brass 45° Male Pipe Elbow SAE 45° Flare Fittings are ideal for use with LP-Gas, Natural Gas, Refrigeration, Gasoline and more

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Used with Copper, aluminum, and Welded Steel Hydraulic Tube that can be flared
• Working Pressure: 1,200 PSI
• Material: Forged brass
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Weight: 0.06 lbs