Fairview USA Inc.

Fairview GAS-FLO™ 1/4” ID x 60” AOL Type 1 Thermoplastic Propane Hose Assembly with 1”-20 Swivel Male Cylinder Thread x QCC1 Fittings. Fairview's Type 1 Thermoplastic MC X QCC Assemblies are CSA certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 60” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Hose Color: Black
• Max Pressure: 350 PSI
• End: 1”-20 Swivel Male Cylinder Thread
• End: Black QCC1 ACME
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.80 lbs

Fairview GAS-FLO™ 1/4” ID x 72” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 72” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.65 lbs

Fairview GAS-FLO™ 1/4” ID x 96” AOL Type 1 Thermoplastic Propane Hose Assembly with 1/4” Male Pipe x RV QD Nipple Fittings. Fairview's Type 1 Thermoplastic RVQD Extension Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 96” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass Male Pipe
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.75 lbs

Fairview GAS-FLO™ 1/4” ID x 96” AOL Type 1 Thermoplastic Propane Hose Assembly with RV QD Coupler x QD Nipple Fittings Fairview's Type 1 Thermoplastic RV Outside Appliance Quick Disconnect Hoses are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 1/4”
• Assembly Overall Length: 96” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1/4” Brass RV QD Coupler
• End: 1/4” Brass RV QD Nipple
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.95 lbs

Fairview QD-GMRVN4-4M GAS-FLO™ 1/4” Nipple x 1/4” MPT CSA RV Gas Quick Disconnect. Fairview's Recreational Vehicle Gas QDs are CSA Certied up to 60 PSI WP

Features:
• C.S.A. (C.G.A. / A.G.A.) design certified for natural gas and L.P. gas - air mixtures
• Full flow plug for quick connect and disconnect of R.V. style coupler

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Nipple (Body Size): 1/4
• Male Pipe Thread: 1/4
• Material: Brass
• Weight: 1.0 oz

Fairview GAS-FLO™ CP-2412 1/4” OD x 12” Short Nose POL x 1/4 MPT Copper Propane Gas Pigtail. Fairview's Short POL To 1/4 MPT Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 12”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: 1/4 MPT
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.30 lbs

Fairview GAS-FLO™ CP-2012 1/4” OD x 12” Short Nose POL x Short Nose POL Copper Propane Gas Pigtail. Fairview's Short POL To Short POL Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 12”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: Short Nose P.O.L
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ CP-2620 1/4” OD x 20” Long Nose POL (7/8 Hex nut) x 1/4 Swivel Male Inverted Flare Copper Propane Gas Pigtail. Fairview's Long POL To 1/4 Inverted Flare Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 20”
• Tube Material: Copper
• End: Long Nose P.O.L (7/8 Hex nut)
• End: 1/4 Swivel Male Inverted Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ CP-2220 1/4” OD x 20” Short Nose POL x 1/4 Swivel Male Inverted Flare Copper Propane Gas Pigtail. Fairview's Long POL To Inverted Flare Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 20”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: 1/4 Swivel Male Inverted Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.35 lbs

Fairview GAS-FLO™ CP-2420 1/4” OD x 20” Short Nose POL x 1/4 MPT Copper Propane Gas Pigtail. Fairview's Short POL To 1/4 MPT Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 20”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: 1/4 MPT
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.40 lbs

Fairview GAS-FLO™ CP-2020 1/4” OD x 20” Short Nose POL x Short Nose POL Copper Propane Gas Pigtail. Fairview's Short POL To Short POL Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 20”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: Short Nose P.O.L
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.50 lbs

Fairview GAS-FLO™ CP-2048 1/4” OD x 48” Short Nose POL x Short Nose POL Copper Propane Gas Pigtail. Fairview's Short POL To Short POL Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 48”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: Short Nose P.O.L
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.80 lbs

Fairview GAS-FLO™ 1-1/2” ID x 300” AOL Type 1 Rubber Propane Hose Assembly with 1-1/2” MPT x 1-1/2” MPT Fittings. Fairview's Type 1 Rubber F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 180°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 1-1/2”
• Assembly Overall Length: 300” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +180°F
• Color: Black
• Max Pressure: 350 PSI
• End: 1-1/2” Steel MPT
• End: 1-1/2” Steel MPT
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 36.3 lbs

Fairview GAS-FLO™ 24" QCC1 Propane Gas Grill Hose & Regulator Replacement Kit. Fairview's QCC1 X F.SAE BBQ Regulator Assemblies are CSA certified to 1 PSI WP (-40°F/-40°C)

Applications:
• Low Pressure regulator fits most gas grills
• QCC1 Connection to 3/8” 45° SAE Female Swivel Flare

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose: Thermoplastic
• Hose Length: 24”
• Regulator: Fairview GR-766
• End: QCC1 ACME
• End: 3/8” 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.70 lbs

Fairview QD-GMC6-6F GAS-FLO™ 3/8” Coupler x 3/8” FPT LPG/Nat. Gas Quick Disconnect. Fairview's CSA LPG/Nat. Gas Couplers are CSA Certified up to 60 PSI WP

Features:
• C.S.A. GAS INTERCHANGE QUICK DISCONNECTS (QD-GMC)
• CSA certified to Z21.41/CSA6.9 for Natural Gas and LP-Gas – air mixtures
• All QD-GMC Quick Disconnects Rated To 60 P.S.I.
• QD-GMC Sizes 1/4, 3/8, 1/2 & 3/4 Quick Disconnects Are Rated To A Temperature -40°F

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Coupler (Body Size): 3/8
• Female Pipe Thread: 3/8
• Quick Disconnect BTU Capacity: 85,000
• Material: Brass
• Weight: 3.3 oz

Fairview GAS-FLO™ BV5221-C 3/8" FPT Forged Full Port Brass Ball Valve 600 WOG. Fairview's Brass Female Pipe Gas Cocks are CSA certified to 5 P.S.I. (-40°) from the appliance to the meter

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• For Indoor/Outdoor applications. C.S.A. Certified forged brass ball valves for Natural and Propane Gas (vapor)
• Brass valves for use in W.O.G. = Water, Oil and Gas 
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA certified to 5 P.S.I.

Specifications:
• W.O.G: 600
• Pipe Size: 3/8” FPT
• Connection Type: Female to Female
• Materials: Aluminum, Brass, NBR, PTFE, Steel
• Operating temperature: -40°F to +125°F (-40°C to +52°C)
• Weight: 0.22 lbs

Fairview GAS-FLO™ 3/8” ID x 120” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 3/8”
• Assembly Overall Length: 120” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.40 lbs

Fairview GAS-FLO™ 3/8” ID x 144” Thermoplastic Grey Natural Gas Grill / BBQ Hose Assembly with 3/8" Female S.A.E. Swivel X 3/8" Quick Disconnects. Fairview's Grey Thermoplastic Natural Gas Grill Assemblies are CSA Certified to Standard ANSI Z21.54 C.G.A. 8.4 (Thermoplastic) Used To Conduct Natural Gas / Propane In A Gaseous State Up To 1/2 P.S.I. 80,000 BTU/Hr. Capacity Natural Gas

Applications:
• Used To Conduct Natural Gas And Propane In A Gaseous State
• Assemblies come complete with dust plug and cap. Remove “PC” If not required

TECHNICAL DATA SHEET

INSTALLATION INSTRUCTIONS

Specifications:
• Hose ID: 3/8”
• Approx. Hose Length: 144”
• BTU/Hr: 80,000
• Color: Grey
• End: 3/8” Female SAE Swivel
• End: 3/8” QD Nipple
• Included: 3/8” QD Coupler with Plug & Cap
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 1.80 lbs

Fairview GAS-FLO™ 3/8” ID x 36” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” 45° SAE Female Swivel Flare Fittings. Fairview's Type 1 Thermoplastic F.SAE Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 3/8”
• Assembly Overall Length: 36” (Tolerance ±1/4 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass 45° SAE Female Swivel Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.50 lbs

Fairview GAS-FLO™ 3/8” ID x 48” AOL Type 1 Thermoplastic Propane Hose Assembly with 3/8” 45° SAE Female Swivel Flare x 3/8” MPT Fittings. Fairview's Type 1 Thermoplastic F.SAE X MPT Assemblies are CSA Certified to 350 PSI WP -40°F To 140°F

Applications:
• Used To Conduct Natural Gas In A Gaseous State And Propane In Either A Liquid Or Gaseous State Up To 350 P.S.I
• UL/CSA Approved Type 1 Propane/Nat Gas Assy (Type 1 Assy)

TECHNICAL DATA SHEET

Specifications:
• Hose ID: 3/8”
• Assembly Overall Length: 48” (Tolerance ±1% of length measured to the nearest 1/8 of an inch)
• Temperature: -40°F to +140°F
• Color: Black
• Max Pressure: 350 PSI
• End: 3/8” Brass 45° SAE Female Swivel Flare
• End: 3/8” Brass MPT
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.65 lbs