Annovi Reverberi - AR North America

Bolt-On Unloader Fits AR SXMA, SXMV, XM, XMA, XMV, XR, RK, RKA, RKV, RR, RRA, RRV Pumps

Specifications:
• Maximum Pressure: 3,650 PSI
• Max. Volume: 5.5 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body
• Built-In bypass channel
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Injector Size: 2.0 (4.0 - 5.5 GPM)
• 2.5 lbs. Weight

Bolt-On Unloader Fits AR SXMA, SXMV, XM, XMA, XMV, XR, RK, RKA, RKV, RR, RRA, RRV Pumps

Specifications:
• Maximum Pressure: 3,650 PSI
• Max. Volume: 5.5 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body
• Built-In bypass channel
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Injector Size: 1.8 (3.0 - 4.0 GPM)
• 2.5 lbs. Weight

Specifications:
• Special blend, 30W viscosity, non-detergent crank case lubricating oil
• Exceeds wear prevention requirements of all major hydraulic pump mfg's
• Contains anti-wear, rust inhibitor and deoxidizer additives
• Packaged in case of 12, 16 oz bottles
• NOT FOR USE IN CAT PUMPS or AXIAL PUMPS
• Weight: 12.0 Lbs.

AR21039 Mini-Matic 4/B Bolt-On Unloader Fits AR RC, RCA, RCMA, RCV, XM, XMA, XMV, XT, XTA, XTV Pumps (Replaces Combi-Set)

Specifications:
• Maximum Pressure: 2,600 PSI
• Max. Volume: 2.0 – 3.0 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body and bypass
• Built-In bypass channel
• Max. Fluid Temp.: 165° F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports: Built-In
• 2.5 lbs. Weight

AR Blue Clean AR70064 is a replacement Unloader and TSS module made for direct fit to the AR630TSS, AR630TSS-HOT, and the AR767 models

This assembly comes prebuild as a complete unloader and TSS Module, ready for install. Simply disconnect your current TSS from the wire harness, remove and replace your current Banjo bolts, and you are up and running again.

This assembly is hassle free and can save you hours should you need to quickly get up and running.

Superseded Prod: AR22620

What's included in the Kit:
• Replacement Banjo Bolts (2)
• Replacement TSS Module w/ wire harness
• Replacement Unloader 0-Rings (2)
• Minimatic Unloader. Upper and Lower
• Replacement (Fixed) Chemical injector Nipple
• Replacement Two Part Unloader Knob

Warning:
• Pressure systems are dangerous. If you have any questions regarding this replacement module please AR Blue Clean directly

• RRV Flange Assembly
• Includes AR3220250 Flange, Bearing, Shaft Seal and O-ring
• Replaces AR3220250-1

• Universal Bracket RK, XW, SXW, SHP, RW
• Height: 1.5:
• Weight: 4.5 lbs

Specifications:
• Max. Volume: 4.0 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body with aluminum bypass
• Built-In bypass channel
• Max. Fluid Temp.: 165° F.
• Inlet Port: 3/8" FPT
• Discharge Port: 3/8” MPT
• Weight: 1.90 lbs.

Specifications:
• Max. Volume: 4.0 GPM
• Adjustable pressure
• No chemical injector
• Brass body with aluminum bypass
• Built-In bypass channel
• Max. Fluid Temp.: 165° F.
• Inlet Port: 3/8" FPT
• Discharge Port: 3/8” MPT
• Weight: 1.85 lbs.

Specifications:
• Max. Volume: 4.0 GPM
• Adjustable pressure
• Fixed chemical injector
• Brass body with aluminum bypass
• Built-In bypass channel
• Max. Fluid Temp.: 165° F.
• Inlet Port: 3/8" FPT
• Discharge Port: 3/8” MPT
• Weight: 1.90 lbs.