Comet Pump

• LWS S Series Misting, low flow pump
• Industrial duty construction for extended life
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 1.2 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports (2): 3/8" FPT
• Discharge Ports (2): 3/8" FPT
• Forged brass head & valve covers
• Solid ceramic plungers
• Stainless steel check valves & piston guides
• Buna-textile V-Packings
• Reversible crankcase for right or left hand mounting
• Anodized, die-cast aluminum crankcase
• Replaces Comet # 6301.2500.00
• Weight: 13.4 lb

• AXS Series Misting, low flow pump
• Industrial duty construction for extended life
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 0.4 GPM
• Max. Discharge Pressure: 1,500 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 5/8” Hollow
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Built-In uniflow unloader and chemical injector
• Forged brass manifold
• Ceramic plungers
• Stainless steel check valves
• Replaces Comet # 6502.0010.00
• Weight: 12.0 lb

• Comet Jetter Valve
• Valve disabler pulse valve with adjustable lever
• Use with Comet series pumps HW, SW & ZW Over 3,000 PSI
• Will not work on ZWD-K MODELS 3538G, 4042G, 4042S
• Pulsating action for sewer cleaning is created by replacing the pump valve cap
• Equipped with an adjustment lever
• Increases effectiveness of sewer hose and nozzles
• Replaces Part Kit # 0608.0035.00

Comet Pump Clear View Inlet Water Filter with Garden Hose Inlet. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.

Features
• Inlet: 3/4" Female GHT
• Outlet: 1/2" MPT
• Max Temperature: 175° F
• Max Flow: 8.0 GPM
• Replaces: 85.300.054
• Weight: 0.50 Lbs

Specifications:
• Works on most 3/4" horizontal & 7/8" vertical engines with solid shafts and a 3/16" keyway
• 3/16" W x 1-1/2" L
• Key may have to be cut to length

• Comet Pump Valve Kit
• Replaces Comet Check Valve Kit # 2409.0123.00 & 2409.0075.00

• Comet Jetter Valve
• Valve disabler pulse valve with adjustable lever
• Use with Comet series pumps LW, FW & ZW Up to 3,000 PSI
• Pulsating action for sewer cleaning is created by replacing the pump valve cap
• Equipped with an adjustment lever
• Increases effectiveness of sewer hose and nozzles
• Replaces Part Kit # 0608.0034.00

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.3 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Ports (2): 1/2" NPT
• Discharge Ports (2): 3/8" NPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6303.0804.00
• Weight: 13.4 lb.

SEAL KIT HOT WATER COMPLETE HM

Replace Comet # 5019.0082.00

Piston Seal Kit VRX

Replaces Comet # 5026.0265.00

Comet Valve Kit (4000+ PSI) TW

Replaces Comet # 5025.0021.00

Comet Valve Kit TW Series Up to 4,000 PSI

Replaces Comet # 5025.0020.00

Comet Seal Kit, Water GXD

Replaces Comet # 5019.0659.00

Comet Piston Seal Kit 20mm FW, HW

Replace Comet # 5019.0039.00

•Comet Piston Seal Kit 15mm ZWD
• Not for ZWD-K MODELS 3538G, 4042G, 4042S

Comet Packing Kit 25mm TW

Replaces Comet # 5019.0655.00

Comet Check Valve Kit AXD, AXS & GXD

Replaces Comet # 5025.0014.00

Comet Hot Water Seals 20mm FW, HW

Replace Comet # 5019.0054.00

• Comet Check Valve Kit LW, ZW, FW2, HW, RW & SW
• Not for ZWD-K MODELS 3538G, 4042G, 4042S
• Replaces Comet Kit # 5025.0011.00

Comet Seal Kit, Water TW 18mm

Replaces Comet # 5019.0645.00