Comet Water Seal Kit AWD, AWD-K, BWD & BWD-K
Comet DWD-K 2530 G 3,000 PSI 2.3 GPM Commercial Duty Triplex Plunger Pump Fully Plumbed with Adjustable Unloader and Chemical Injector
Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Forged brass manifold and ceramic plungers to prevent pitting and wear
• Built-in unloader and chemical injector for quick plug and play on systems
• Lubricated double seal packings to increase pump longevity (high & low)
• Anodized crankcase to protect from the harshest elements
• Ceramic Plungers
• Stainless steel check valves to keep pump at optimal performance.
• Featuring a 3/4” hollow shaft with flange for coupling to gas engines.
ADDITIONAL FEATURES OF PLUMBED MADE READY PUMP:
• 3 Foot soap hose with filter
• 3/8” QC plug
• Thermal relief valve
• Garden hose adapter with spring
Specifications:
• Max. Volume: 2.3 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.3 GHP
• Inlet Port: 3/4" GH (garden hose)
• Outlet Port: 22M-14 Male Twist Connect with 3/8" QC Plug
• Note: Optional D10088 3/8" QD Coupler shown below
• Weight: 11.55 lb.
Comet EWD-K 4042G, EWD 4042 G-K Pump with Built-In Unloader, chemical injector, thermal valve and garden hose inlet connector. This 4, 200 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP
Features
• Built-In adjustable unloader with chemical injector
• 1” Hollow Shaft with SAE J609B flange for coupling to gas engines
• High-strength Brass Pump Head
• New designed reversible carter made in special aluminum alloy
• Stainless –steel hardened piston guides
• Special plugs for dust protection
• O- ring and labyrinth oil seal system between crankcase and rear cover, to reduce oil splashing
• Wide oil level viewer
• Special aluminum alloy conrods made in a single piece
• Top-quality and oversized ball-needle bearings to ensure long durability
• Highly efficient stainless steel check valves with removable plugs for easy inspection
• Solid ceramic plungers, high corrosion and abrasion-proof
• High performance double sealing system
Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,200 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 15.27 GHP
COMPONENTS:
• Comet EWD-K 4042G Triplex Plunger Pump
• Thermal relief valve
• 3/4” Garden Hose Inlet Fitting
• 3/8” QC brass socket
• Mounting bolts
• Chemical injector hose and filter
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 16.10 lb
Comet FW2 4040 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 14.55 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 19.4 lb
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 15.0 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 19.4 lb
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 1-1/8” Hollow
• Max. Horsepower Requirements: 7.5 EHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 20.3 lb
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 3,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 7.5 BHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 19.6 lb
Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings
Specifications:
• Max. Volume: 5.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.18 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Weight: 19.6 lb
Comet Pump 1/2” MPT Solid Brass Inlet Water Filter with Garden Hose Inlet and 1/4” Return Port. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.
Features
• Inlet: 3/4" Female GHT
• Outlet: 1/2" MPT
• Return Port: 1/4" FPT
• Max Flow: 10.5 GPM
• Weight: 0.45 Lbs
Comet Pump 3/8” MPT Solid Brass Inlet Water Filter with Garden Hose Inlet and 1/4” Return Port. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.
Features
• Inlet: 3/4" Female GHT
• Outlet: 3/8" MPT
• Return Port: 1/4" FPT
• Max Flow: 10.5 GPM
• Weight: 0.45 Lbs
Comet Pump 5,000 PSI High Pressure Inline Filter, 1/4” FPT x 1/4” MPT. Extend the life of your rotating or variable nozzle with an inlet filter
Features:
• 80 Mesh Screen
• SST w/Brass Insert
Specifications:
• Max. Pressure: 5,000 PSI
• Max. Volume: 10.5 GPM
• Screen: 80 Mesh
• Maximum Temperature: 194° F
• Inlet: 1/4" FPT
• Outlet: 1/4" MPT
• Weight: 0.25 lbs.