The Torque Bar and Chain is needed to anchor a PTO-mounted pump to keep it from turning with the PTO shaft. Fits all Roller pumps
Delavan 50101-1 set screw coupler. For 5/8” diameter electric motor or gas engine; 5/8” pump shaft; 2600 RPM; mild steel with set screws
Specifications:
• Use with Delavan 4400 series pumps
• For 5/8” Diameter electric motor or gas engine
• Max. Operating Speed: 2,600 RPM
• Mild steel construction
• Weighs 0.60 lbs
Quick Connect Fittings Kit for Delavan 2.2 GPM Flex Pump:
• (2) 5/8” QA x 3/8" HB Elbow Fittings
• (1) 5/8” QA x 3/8" Straight HB Fitting
• (2) 3/4” to 5/8” Port Adapter
• (2) Slide Connectors for 5/8” Fittings
Delavan PowerMAX™ Stroke Control Kit 2 Fits 1-3/4" to 2" Cylinder Shafts
Delavan PowerMAX™ Stroke Control Kit 1 Fits: 1-1/8", 1-1/4", 1-3/8", & 1-1/2" Cylinder Shafts
Delavan MBV3SP-FLT1 PowerMAX™ 30 GPM Mono-Block Directional Control Valve, 3 Spool W/ 1st Position Float. Delavan PowerMax Cylinders, Mono-Block and Kick-Off Valves are designed and manufactured to meet the most demanding requirements
Features:
• Constructed of high tensile strength gray cast iron
• Load check on each spool to prevent the fall of a cylinder as the spool is shifted
• Hard chrome plated spool
• Built-in relief valve adjustable from 1,500 to 3,000 PSI, preset at 2,500 PSI
• 3 Spool With Float Spool available at 1st position – allows the blade to follow the contour of the ground while leveling or plowing
Specifications:
• Flow Rate: 30 GPM
• Max Pressure : 3,000 PSI
• Inlet / Outlet Ports: 3/4” NPT
• Work Ports: 1/2” NPT
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 37.0 lbs
Delavan PowerMAX™ 30 GPM Mono-Block Directional Control Valve, 2 Spool W/ 1st Position Float. Delavan PowerMax Cylinders, Mono-Block and Kick-Off Valves are designed and manufactured to meet the most demanding requirements
Features:
• Constructed of high tensile strength gray cast iron
• Load check on each spool to prevent the fall of a cylinder as the spool is shifted
• Hard chrome plated spool
• Built-in relief valve adjustable from 1,500 to 3,000 PSI, preset at 2,100 PSI
• 2 Spool With Float Spool available at 1st position – allows the blade to follow the contour of the ground while leveling or plowing
Specifications:
• Flow Rate: 30 GPM
• Max Pressure : 3,000 PSI
• Inlet / Outlet Ports: 3/4” NPT
• Work Ports: 1/2” NPT
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 24.0 lbs
Delavan PowerMAX™ 30 GPM Log Splitter Kick-Off Control Valve. Delavan PowerMax Cylinders, Mono-Block and Kick-Off Valves are designed and manufactured to meet the most demanding requirements
Features:
• Constructed of high tensile strength gray cast iron
• Built-in adjustable relief valve
• Hard chrome plated spool
Recommended Hydraulic System:
• Maximum tank pressure: 500 PSI
• Maximum operating temperature: 180˚F
• Recommended system filtration: 10 micron
Specifications:
• Maximum GPM: 30
• Maximum operating pressure : 3,625 PSI
• Spool action is spring center/hydraulic kick-off
• Built-in relief valve preset at 2,250 PSI
• Kick-off pressure is non-adjustable, preset at 800 PSI
• Handle can be installed in “up” or “down” position
• Inlet / Outlet ports on the side: 3/4” NPT
• Top ports going to the cylinder: 1/2” NPT
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 8.95 lbs
Delavan PowerMAX™ 2-Stage 16 GPM Hydraulic Log Splitter Gear Pump.
Features:
• Excellent for log splitter, presser & trash compactor
• High tensile strength cast iron or aluminum construction
• Large displacement at low pressure, small displacement at high pressure 85% efficient
• These pumps are a direct bolt on replacement for most log splitters
Specifications:
• GPM: 16
• Max Working Pressure: 3,000 PSI
• Adjustable Unload Range: 400 to 900 PSI, preset @ 650 PSI
• RPM Range: 500 to 3,600
• Rotation: CW
• Inlet: 1” Tube
• Outlet: 1/2” NPT
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 6.8 lbs