Delavan Fluid Power

The Torque Bar and Chain is needed to anchor a PTO-mounted pump to keep it from turning with the PTO shaft. Fits all Roller pumps

Delavan 50101-1 set screw coupler. For 5/8” diameter electric motor or gas engine; 5/8” pump shaft; 2600 RPM; mild steel with set screws

Specifications:
• Use with Delavan 4400 series pumps
• For 5/8” Diameter electric motor or gas engine
• Max. Operating Speed: 2,600 RPM
• Mild steel construction
• Weighs 0.60 lbs

Quick Connect Fittings Kit for Delavan 2.2 GPM Flex Pump:

• (2) 5/8” QA x 3/8" HB Elbow Fittings
• (1) 5/8” QA x 3/8" Straight HB Fitting
• (2) 3/4” to 5/8” Port Adapter
• (2) Slide Connectors for 5/8” Fittings

Delavan PowerMAX™ Stroke Control Kit 2 Fits 1-3/4" to 2" Cylinder Shafts

Delavan PowerMAX™ Stroke Control Kit 1 Fits: 1-1/8", 1-1/4", 1-3/8", & 1-1/2" Cylinder Shafts

Delavan MBV3SP-FLT1 PowerMAX™ 30 GPM Mono-Block Directional Control Valve, 3 Spool W/ 1st Position Float. Delavan PowerMax Cylinders, Mono-Block and Kick-Off Valves are designed and manufactured to meet the most demanding requirements

Features:
• Constructed of high tensile strength gray cast iron
• Load check on each spool to prevent the fall of a cylinder as the spool is shifted
• Hard chrome plated spool
• Built-in relief valve adjustable from 1,500 to 3,000 PSI, preset at 2,500 PSI
• 3 Spool With Float Spool available at 1st position – allows the blade to follow the contour of the ground while leveling or plowing

Mono-Block Manual

Specifications:
• Flow Rate: 30 GPM
• Max Pressure : 3,000 PSI
• Inlet / Outlet Ports: 3/4” NPT
• Work Ports: 1/2” NPT
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 37.0 lbs

Delavan PowerMAX™ 30 GPM Mono-Block Directional Control Valve, 2 Spool W/ 1st Position Float. Delavan PowerMax Cylinders, Mono-Block and Kick-Off Valves are designed and manufactured to meet the most demanding requirements

Features:
• Constructed of high tensile strength gray cast iron
• Load check on each spool to prevent the fall of a cylinder as the spool is shifted
• Hard chrome plated spool
• Built-in relief valve adjustable from 1,500 to 3,000 PSI, preset at 2,100 PSI
• 2 Spool With Float Spool available at 1st position – allows the blade to follow the contour of the ground while leveling or plowing

Specifications:
• Flow Rate: 30 GPM
• Max Pressure : 3,000 PSI
• Inlet / Outlet Ports: 3/4” NPT
• Work Ports: 1/2” NPT
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 24.0 lbs

Delavan PowerMAX™ 30 GPM Log Splitter Kick-Off Control Valve. Delavan PowerMax Cylinders, Mono-Block and Kick-Off Valves are designed and manufactured to meet the most demanding requirements

Features:
• Constructed of high tensile strength gray cast iron
• Built-in adjustable relief valve
• Hard chrome plated spool

Recommended Hydraulic System:
• Maximum tank pressure: 500 PSI
• Maximum operating temperature: 180˚F
• Recommended system filtration: 10 micron

Specifications:
• Maximum GPM: 30
• Maximum operating pressure : 3,625 PSI
• Spool action is spring center/hydraulic kick-off
• Built-in relief valve preset at 2,250 PSI
• Kick-off pressure is non-adjustable, preset at 800 PSI
• Handle can be installed in “up” or “down” position
• Inlet / Outlet ports on the side: 3/4” NPT
• Top ports going to the cylinder: 1/2” NPT
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 8.95 lbs

Delavan PowerMAX™ MBV1SP-CONV 21 GPM 3,500 PSI 3 or 4 Way Mono-Block Control Valve. Delavan PowerMax Cylinders, Mono-Block and Kick-Off Valves are designed and manufactured to meet the most demanding requirements

Features:
• 3 Way or 4 Way mono-block control valve
• Can be used for single acting or double applications
• Includes conversion adapter
• Load check on spool
• Adjustable relief from 1,500 to 3,625 PSI, preset at 2,500 PSI

Specifications:
• Flow Rate: 21 GPM
• Working Pressure : 3,500 PSI
• Inlet / Outlet Ports: # 10 ORB (SAE)
• Work Ports: # 8 ORB (SAE)
• Packaging: Small box
• Warranty: 3 Years from date of purchase
• Weight: 8.95 lbs

Fairview FLEX-DOT 1485 Series 3/8" x 100' Orange Reinforced Air Brake Tubing - Type 3B. Air brake tube is designed for use with truck, trailer and other mobile air brake and auxiliary systems. This lightweight, flexible and UV stabilized tube is highly resistant to abrasion, oil, grease and road salt

MEETS OR EXCEEDS: D.O.T. F.M.V.S.S. 106 S.A.E. J844 TEST REQUIREMENTS

FLEX-DOT 1485 Series Air Brake Tube is MADE IN CANADA

Compliance:
• All series 1485 tube are designed in compliance with the revised DOT 106 standard which took effect December 24th, 2007
• Fairview’s FLEX-DOT air brake tube is dimensionally identical to the previous air brake tube described in SAE J844 Type A and Type B, and is compatible with the same fittings. Both compression and push-to-connect fittings can be used with FLEX-DOT tube in all applications other than truck to trailer connections, in which push-to-connect fittings are not suitable

Materials:
• Both the core tube and jacket are comprised of a custom formulated elastomer, offering exceptional heat aging, oil resistance, and low temperature flexibility, when compared to previous nylon materials
• With its improved flexibility at all temperatures, the FLEX-DOT tube is easier to install in tight quarters
• The special compound was custom formulated for this application and offers exceptional flexibility even at very low temperatures. Unlike traditional all-nylon tube, the FLEX-DOT elastomer hose can still be flexed at -65C (-85F)

SPECIFICATION SHEET FLEX-DOT SERIES 1485

INSTALLATION DATA SHEET

Specifications:
• Nominal OD: 3/8”
• Inside Diameter ID: 0.251”
• Wall Thickness: 0.062" +/-0.004"
• Length: 100’
• Temperature: -85°F to +200°F, -65°C to +93°C
• Type: 3B, Reinforced
• Color: Orange
• Working Pressure: 350 PSI
• Minimum Burst @ 68°F: 1,400 PSI
• Supported Bend Radius: 1.50”
• Unsupported Bend Radius: 1.50”
• Approx. Weight: 3.2 lbs