General Pump

General TSP1619 High Pressure Triplex Plunger Pump 7,250 PSI 3.6 GPM 1,450 RPM / 5,800 PSI 4.3 GPM 1,750 RPM

Features:
• Compact, High Pressure
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves “thermal shock” resistance
• New valve cap design improves hydrostatic performance

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.6 / 4.3 GPM
• Max. PSI: 7,250 / 5,800
• Max. Pump Speed: 1,450 / 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 17.8 EBHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2” BSP-F
• Discharge Ports (2): 3/8” BSP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 51.8 lb.

1/4” General Pump # 4.0 “Penetrator” Type Sewer Nozzle 1 Front 3 Rear 5,000 PSI.

Features
• “Penetrator” nozzles blast forward with one nozzle to break up debris and clogs
• 3 Rear (25°) facing nozzles advance hose through pipe
• Excellent for cutting through roots, dirt and debris
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.0
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 4.5 “Penetrator” Type Sewer Nozzle 1 Front 3 Rear 5,000 PSI.

Features
• “Penetrator” nozzles blast forward with one nozzle to break up debris and clogs
• 3 Rear (25°) facing nozzles advance hose through pipe
• Excellent for cutting through roots, dirt and debris
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 5.0 “Penetrator” Type Sewer Nozzle 1 Front 3 Rear 5,000 PSI.

Features
• “Penetrator” nozzles blast forward with one nozzle to break up debris and clogs
• 3 Rear (25°) facing nozzles advance hose through pipe
• Excellent for cutting through roots, dirt and debris
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 5.0
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 5.5 “Penetrator” Type Sewer Nozzle 1 Front 3 Rear 5,000 PSI.

Features
• “Penetrator” nozzles blast forward with one nozzle to break up debris and clogs
• 3 Rear (25°) facing nozzles advance hose through pipe
• Excellent for cutting through roots, dirt and debris
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 5.5
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 4.0 “Flusher” Type Sewer Nozzle 0 Front 3 Rear 5,000 PSI.

Features
• “Flusher” nozzles expel loose debris as hose travels through pipe
• 3 Rear (25°) facing nozzles advance hose through pipe
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.0
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 4.5 “Flusher” Type Sewer Nozzle 0 Front 3 Rear 5,000 PSI.

Features
• “Flusher” nozzles expel loose debris as hose travels through pipe
• 3 Rear (25°) facing nozzles advance hose through pipe
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 5.0 “Flusher” Type Sewer Nozzle 0 Front 3 Rear 5,000 PSI.

Features
• “Flusher” nozzles expel loose debris as hose travels through pipe
• 3 Rear (25°) facing nozzles advance hose through pipe
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 5.0
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 5.5 “Flusher” Type Sewer Nozzle 0 Front 3 Rear 5,000 PSI.

Features
• “Flusher” nozzles expel loose debris as hose travels through pipe
• 3 Rear (25°) facing nozzles advance hose through pipe
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 5.5
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump D10067 High Pressure Stainless Steel Swivel 3/8" M x 3/8" F 5,000 PSI

Specifications:
• Body Material: Stainless steel
• Max GPM: 10
• Rated PSI: 5,000
• Max PSI: 5,000
• Max Temp: 200°
• Inlet: 3/8" NPT-M
• Outlet: 3/8" NPT-F
• Weight: 3.5 oz

General Pump 36” Stainless Steel Vented Grip Lance & Nozzle Protector. Rated to 10.5 GPM and 7,250 PSI

Specifications
• Max Pressure: 7,250 PSI
• Max Flow: 10.5 GPM
• Max Temperature: 220° F
• Inlet 1/4" NPT-M
• Outlet 1/4" NPT-F with nozzle protector
• Works best with 1/4" NPT-M nozzles (not included)
• Matching lance for GP YG7207 & PA RL57 spray gun
• Weight: 2.2 lbs

General Pump YG7207 / PA RL57 Easy Pull Spray Gun with 36” Stainless Steel Lance & Nozzle Protector. Rated to 7.5 GPM and 7,250 PSI

Features
• GP YG7207/ PA RL 57 Easy Pull stainless steel spray gun 7.5 GPM 7,900 PSI
• General Pump 36” stainless steel vented grip lance with nozzle protector 7,2500 PSI 7.5 GPM

Specifications
• Max Pressure: 7,250 PSI
• Max Flow: 7.5 GPM
• Max Temperature: 212° F
• Trigger Gun Inlet 3/8" NPT-F
• Lance Outlet 1/4" NPT-F
• Works best with 1/4" NPT-M nozzles (not included)
• Weight: 3.5 lbs

General Pump 2103220 Swivel for Hammerhead Surface Cleaners

Specifications:
• Hammerhead Models: DCFSCP18GZ, DCFSCP20GZ & DCFSCP24GZ
• Weighs 1.95 lbs

General Pump 2103226 Swivel for Hammerhead Surface Cleaner

Specifications:
• Hammerhead Model: DCFSCS22GZ
• Weighs 1.95 lbs

General Pump 2100372 Swivel Repair Kit (Major) for Duct Cleaner & Hammerhead Surface Cleaners

Specifications:
• Repair Kit For 2103220, 2103226 & 2103293 Swivels
• Weighs 0.95 lbs

General Pump 2100203 Swivel Repair Kit (Minor) for Duct Cleaner & Hammerhead Surface Cleaners

Specifications:
• Repair Kit For 2103220, 2103226 & 2103293 Swivels
• Weighs 0.95 lbs

General Pump Rotary Arm Assembly for DCFSCS22Z
• Arm Length from Center: 10"
• Design: 3 Arm design
• Nozzles: 925020M (3)
• Weight: 1.45 lb

General Pump Rotary Arm Assembly for DCFSCP18 & DCFSCP18GZ
• Arm Length: 16-3/16"
• Design: 2 Arm design
• Nozzles: 925020M (2)
• Weight: 0.80 lb

General Pump Rotary Arm Assembly for DCFSCP20 & DCFSCP20GZ
• Arm Length: 18.75"
• Design: 2 Arm design
• Nozzles: 925020M (2)
• Weight: 0.85 lb