General Pump

General Pump 100295 Series 100 Oil, 16 oz. Bottle. General Industrial Oil is a premium multi-purpose lubrication formulated to protect against rust and oxidation. It offers long service life and prevents sludge and varnish formation, even at high temperatures

Features:
• General Industrial Oil possesses a high natural viscosity index. This means more constant operating characteristics over wide temperature range
• Recommended for use in General Pump crankcases on systems requiring less than 25 BHP. Initial oil change after break-in period between 50 and 100 hours. Then every three months of 300 hours of operation thereafter. Check oil level in crankcase daily or before each use.
• Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance

Specifications:
• Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston and plunger pumps
• Resists foaming and aeration
• Highly resistant to oxidation that would result in sludge formation
• Resistas formation of harmful oil water emulsions
• Compatible with typically used seals and gaskets
• High viscosity index (IV) means more constant operating characteristics over wide temperature ranges
• Low pour point assures fluid flow during cold weather operation
• Outstanding thermal and hydrolytic stability assures long oil life
• Exceeds wear prevention requirements of all major hydraulic pump manufactures
• Packaged in one 16 oz bottle
• Weight: 1 lbs

General ZK138 Flow Unloader 3,600PSI, 3/8" BSP-F Inlet & 3/8" BSP-M

• Max. Pressure: 3,600 PSI
• Max. Volume: 2.4 - 10.8 GPM
• Adjustable pressure
• Brass body
• Max. Fluid Temp.: 165°
• Inlet: 3/8" BSP-F
• Outlet: 3/8" BSP-M
• Bypass: 1/2" BSP-M
• Gauge Port: 1/4" BSP-F
• Weight: 2.3 lbs.

General EZ3042S 3000 PSI, 4.2 GPM Solid Shaft Pump for belt drive, flex coupling or gear reduction

Features:
• Solid ceramic plunger design
• Flex coupling and bell housing available for direct drive
• Forged brass manifold with 4:1 hydrostatic rating
• Die-cast, anodized aluminum, oil-bath crankcase
• Premium roller bearing
• Unitized stainless steel inlet and discharge valves
• Available in “L” left-handed versions

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24MM Solid
• Max. Horsepower Requirements: 8.6 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right>
• Crankcase Oil Capacity: 14.0 oz
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 18.0 lb.

3/8" Ball Valve Kit with GP Quick Disconnect Couplers 4,000 PSI. Use ball valve to control the flow of water

Ball Valve Specifications
• Zinc plated steel bod
• Chrome plated steel ball
• Max Temperature: +212°F
• Max Pressure: 7,250 PSI

Kit Includes:
• 3/8" FPT Valley Industries Ball valve
• 3/8" General Pump D11009 Zinc plated steel plug
• 3/8" General Pump D10004 Brass socket
• Max Pressure: 4, 000 PSI
• Weight 1.45 lbs.

GP ZROTOMAX2 (Blue) Adjustable Rotating Nozzle 3,625 PSI.

Featuring:
• The ROTOMAX is designed to improve the cleaning efficiency of your high pressure washer by producing a rotating action that greatly expands the contact area of the cleaning stream, while providing the impact of a zero-degree nozzle
• The unique internal design allows aim-and-shoot operation, even when cleaning overhead, and permits easy replacement of all wear parts
• Sized according to flow rate, a Rotomax is perfect for your toughest cleaning tasks.

Data & Nozzle Chart Sheet

Specifications:
• Max Pressure: 3,625 PSI
• Max Temperature: 176º FI
• Inlet Size: 1/4”-19 BSPP-F
• Dimensions; 1.5 O.D. x 4.1 Lg.
• Materials Brass, Plastic, Ceramic, Buna-N
• Size Color: Blue
• Weight: 0.6 lb

GP ZROTOMAX3 (Black) Adjustable Rotating Nozzle 3,625 PSI.

Featuring:
• The ROTOMAX is designed to improve the cleaning efficiency of your high pressure washer by producing a rotating action that greatly expands the contact area of the cleaning stream, while providing the impact of a zero-degree nozzle
• The unique internal design allows aim-and-shoot operation, even when cleaning overhead, and permits easy replacement of all wear parts
• Sized according to flow rate, a Rotomax is perfect for your toughest cleaning tasks.

Data & Nozzle Chart Sheet

Specifications:
• Max Pressure: 3,625 PSI
• Max Temperature: 176º FI
• Inlet Size: 1/4”-19 BSPP-F
• Dimensions; 1.5 O.D. x 4.1 Lg.
• Materials Brass, Plastic, Ceramic, Buna-N
• Size Color: Black
• Weight: 0.6 lb

GP ZROTOMAX1 (Red) Adjustable Rotating Nozzle 3,625 PSI.

Featuring:
• The ROTOMAX is designed to improve the cleaning efficiency of your high pressure washer by producing a rotating action that greatly expands the contact area of the cleaning stream, while providing the impact of a zero-degree nozzle
• The unique internal design allows aim-and-shoot operation, even when cleaning overhead, and permits easy replacement of all wear parts
• Sized according to flow rate, a Rotomax is perfect for your toughest cleaning tasks.

Data & Nozzle Chart Sheet

Specifications:
• Max Pressure: 3,625 PSI
• Max Temperature: 176º FI
• Inlet Size: 1/4”-19 BSPP-F
• Dimensions; 1.5 O.D. x 4.1 Lg.
• Materials Brass, Plastic, Ceramic, Buna-N
• Size Color: Red
• Weight: 0.6 lb