General Pump

PA FL7 / General Pump YFL7SWITCH 5,650 PSI Mount In Any Position Flow Switch

Features
• Can be installed horizontally or vertically
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnetic probe casing made of antiflame material

FL7 Data Sheet

Specifications
• Rated Pressure: 5,100 PSI
• Permissible Pressure: 5,650 PSI
• Max Flow Rate: 8 GPM
• Activation Flow Rate: Horizontal: 1.6 GPM
• Activation Flow Rate: Vertical: 2.4 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electric Cable: 2x0,5 mmq. - 0
• Electrical insulation: 55 IP - 0
• Inlet: 3/8 Bsp F
• Outlet: 3/8 Bsp F
• Weight: 15.38 oz.

PA FL3 / General Pump YFLOSWITCH 4,050 PSI Mount In Any Position Flow Switch

Features
• Can be installed horizontally or vertically
• Reed switch with high resistance
• Reduced dimensions both axial and lateral
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnet covered by plastic casing to minimize the braking effect of metal particles and scale

FL3 Data Sheet

Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Activation Flow Rate: Horizontal: 0.8 GPM
• Activation Flow Rate: Vertical: 0.8 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electric Cable: 2x0,5 mmq. - 0
• Electrical insulation: 55 IP - 0
• Inlet: 3/8 Bsp F
• Outlet: 3/8 Bsp F
• Weight: 10.58 oz.

General Pump 2660059 Brush Assembly for DCFSCP20 & DCFSCP20GZ
• Size: 20" x 20" x 2"
• Weight: lb

PA TR1 /GP YADJNOZ Adjustable Hi / Low Nozzle Holder. The adjustable nozzle holder TR1 can work with pressures up to 4,050 PSI and with flow rates up to 8 GPM

Features
• By turning the plastic protection it is possible to switch from high to low pressure
• This type of device is normally used with high-pressure cleaners that provide for the mixing of water with chemical product by means of a Venturi injector

Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Rated Temperature: 300° F.
• Body Material: Brass
• Inlet: 1/4 Npt F
• Outlet: 1/4 Npt F
• Weight: 4.06 oz.
• Note: Requires one 1/4” MPT nozzle, which is not included

General Pump D10118 2 Way Steel Unloader Mounting Block, 3/8" NPT-F x 3/8" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 5,500 PSI
• Material: Steel, with YZD Finish

General Pump D10119 3 Way Brass Unloader Manifold Block, 3/8" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 4,000 PSI
• Material: Brass

General Pump D10127 2 Way Steel Unloader Mounting Block, 1/2" NPT-F x 1/2" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 5,000 PSI
• Material: Steel, with YZD Finish

General Pump D10117 3 Way Brass Unloader Manifold Block, 1/2" NPT-F x 1/2" NPT-F x 3/8" NPT-F

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 4,000 PSI
• Material: Brass

3/8" Ball Valve Kit with GP Stainless Steel Quick Disconnect Couplers 5,000 PSI. Use ball valve to control the flow of water

Ball Valve Specifications
• Zinc plated steel bod
• Chrome plated steel ball
• Max Temperature: +212°F
• Max Pressure: 7,250 PSI

Kit Includes:
• 3/8" FPT Valley Industries Ball valve
• 3/8" General Pump D10079 stainless steel plug
• 3/8" General Pump D10075 stainless steel socket
• Max Pressure: 5, 000 PSI
• Weight 1.45 lbs.

12 Pack General Pump D10072 Quick Disconnect Coupler Sockets Stainless Steel 1/4” x 1/4" NPT-F 6,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Package Contents:
• 12 QD Sockets

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 1/4"
• Thread: 1/4” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 6,000 PSI
• Weight: 1.40 lb

12 Pack General Pump D10001 Quick Disconnect Coupler Sockets Brass 1/4” x 1/4" NPT-F 5,000 PSI

Features:
• Quick disconnect design
• Brass
• EPDM O-Ring

Package Contents:
• 12 QD Sockets

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 1/4"
• Thread: 1/4” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Weight: 1.50 lb

General ET1506E34 2,610 PSI 2.9 GPM (Left Handed) Direct Drive Pump flanged to direct couple on electric NEMA 56 C motors

Features:
• “HR” anti-corrosion surface treatment on manifold
• New generation seal package
• Dust protection chamber
• Solid ceramic plungers
• Oversized plunger guide
• Optimized inlet and outlet valves
• Oversized crankcase Hollow shaft, flanged for direct couple to electric motors (NEMA56C)

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 5.2 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-14 BSP-F
• Discharge Port Thread: 3/8"-19 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 7.3" x 7.4" x 5.5"
• Weight: 11.0 lb

General ET1506E34 2,610 PSI 2.9 GPM Direct Drive Pump flanged to direct couple on electric NEMA 56 C motors

Features:
• “HR” anti-corrosion surface treatment on manifold
• New generation seal package
• Dust protection chamber
• Solid ceramic plungers
• Oversized plunger guide
• Optimized inlet and outlet valves
• Oversized crankcase Hollow shaft, flanged for direct couple to electric motors (NEMA56C)

Specifications:
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Horsepower Requirements: 5.2 EBHP
• Max. Pump Speed: 3,400 RPM
• Max. Fluid Temp.: 165º F
• Oil Capacity: 8.5 oz
• Inlet Port Thread: 1/2"-14 BSP-F
• Discharge Port Thread: 3/8"-19 BSP-F
• Shaft Diameter: 5/8” Hollow
• Dimensions – Nominal: 7.3" x 7.4" x 5.5"
• Weight: 11.0 lb

General TSS1021 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.5 / 5.6 GPM
• Max. Discharge Pressure: 3,500 / 1,700 PSI
• Max. Pump Speed: 1,125 / 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces PG564
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

12 Pack General Pump D10078 Quick Disconnect Coupler Plug Stainless Steel 3/8” x 3/8" NPT-F 6,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel

Package Contents:
• 12 QD Plugs

Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: 304 Stainless steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 6,000 PSI
• Weight: 1.08 lb