PA TR1 /GP YADJNOZ Adjustable Hi / Low Nozzle Holder. The adjustable nozzle holder TR1 can work with pressures up to 4,050 PSI and with flow rates up to 8 GPM
Features• By turning the plastic protection it is possible to switch from high to low pressure • This type of device is normally used with high-pressure cleaners that provide for the mixing of water with chemical product by means of a Venturi injector
Specifications• Rated Pressure: 3,650 PSI• Permissible Pressure: 4,050 PSI • Rated Flow Rate: 8 GPM • Rated Temperature: 300° F. • Body Material: Brass• Inlet: 1/4 Npt F• Outlet: 1/4 Npt F• Weight: 4.06 oz.• Note: Requires one 1/4” MPT nozzle, which is not included
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
General Pump 25° x #3.5 M-Style Spray Nozzle 1/4” NPT-M
Features• 5,000 PSI operating pressure• Made in the USA• General Pump High Pressure Spray Tips feature a two piece design• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability• The contour control nozzle chamber eliminates the need for flow straighteners • Resistant to most chemical• Laser marked for clarity and durability
Specifications• Tip Angle: 25°• Nozzle Size: 3.5• Operating Pressure: 5,000 PSI• Connection: 1/4” NPT-M• Weight: 0.05 oz
Please use Nozzle Chart to determine proper nozzle size
Nozzle Chart
Mecline 25° High Pressure Threaded Spray Nozzle with Ceramic Orifice and 1/4” Male NPT
Features• Ceramic inserts provide up to 10 times the wear life of stainless steel inserts• Ceramic insert is resistant to wear• The ceramic insert guarantees a more precise and stronger stream• Stainless Steel AISI303 body
Specifications• Flat fan jet angle: 25°• Nozzle Size: 5.5• Rated Pressure: 4,500 PSI• Permissible Pressure: 5,075 PSI • Rated Temperature: 300° F• Inlet: 1/4” Male NPT• Weight: 0.63 oz
>
General Pump 2100472GH Low Pressure In-line Water Filter 3/4 FGH x 1/2” NTP-M with 1/4" Bypass Ports
Features• Low-pressure in-line filter• Rigid construction• Stainless Steel mesh filter• Die cast aluminum (anodized) housing and plastic cap• No tools required for cleaning• Ports for bypass hose and gauge• Brass garden hose fitting (2100472GH)
Specifications• Max Volume: 8.0 GPM• Maximum Pressure: 145 PSI• Temperature: 176° F • Filter: 50 Mesh • Inlet: Female garden hose (FGH)• Outlet: 1/2” NPT-M• Bypass Ports: 1/4” F• Materials: Aluminum, Brass, Plastic, Buna-N• Weight: 0.30 Lbs
Specifications:• Maximum Pressure: 2,900 PSI• Max. Volume: 8.0 GPM• Knob Color: Red • Adjustable pressure• Brass valve body• Max. Fluid Temp.: 194° F.• Inlet Port: 3/8" MNPT• Discharge Port: 3/8” MNPT• Bypass Port: 3/8” FNPT• Replaces MV540K Unloader• Weight: 13.7 oz