Nozzle Holder / Protector

Suttner Nozzle Holder for 1/4" Lance. Holds 4 of your most commonly used 1/4" Quick Connect nozzles for quick and easy access

Features
• Easy access to nozzles
• Slides over 1/4” lance
• Holder made of soft durable polymer

Specifications
• Hold four 1/4” quick connect nozzles
• Max Temp: 140° F.
• Note: Nozzles and lance are not included
• Weight: 0.10 lb

Suttner ST-10 Nozzle Protector 1/4" F Grey & Black

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Grey / black
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-10 Nozzle Protector 1/4" F Black & Black

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / black
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-10 Nozzle Protector 1/4" F Black & Blue

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / blue
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-10 Nozzle Protector 1/4" F Black & Red

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Black / red
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

General Pump 2560001 Multi-Nozzle Holder (Accepts 1/4" MPT Nozzles)

Features
• This handy tool allows you to very quickly switch between four different nozzles on one spray gun wand.
• It accepts any 1/4" NPT-M thread spray nozzles and turns each one into a quick-connect tip.
• Works great for changing between foam and water, reaching multiple height levels, or altering the intensity of the spray without having to carry around several individual nozzles!
• Note: Nozzles not included.

Specifications

Specifications
• Dimensions: 0.70” H x 3.30” L
• Replaces JROD #6540
• Weight: 0.25 lb

PA TR1 /GP YADJNOZ Adjustable Hi / Low Nozzle Holder. The adjustable nozzle holder TR1 can work with pressures up to 4,050 PSI and with flow rates up to 8 GPM

Features
• By turning the plastic protection it is possible to switch from high to low pressure
• This type of device is normally used with high-pressure cleaners that provide for the mixing of water with chemical product by means of a Venturi injector

Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Rated Temperature: 300° F.
• Body Material: Brass
• Inlet: 1/4 Npt F
• Outlet: 1/4 Npt F
• Weight: 4.06 oz.
• Note: Requires one 1/4” MPT nozzle, which is not included

Features
• For use when high and low pressures are needed
• For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 195° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 6.1 oz.
• Note: Requires one 1/4” MPT spray nozzle and one 1/4” MPT soap nozzle, which are not included

Features
• High Quality, German engineered components
• Through twisting the plastic housing the high or low pressure operation is continuously adjustable
• Dumps water around nozzle to lower pressure
• Nozzle housing is made of an impact resistant plastic, manufactured of corrosion resistant material

Specifications
• Max Pressure: 3,600 PSI
• Max Flow: 8 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.36 lb

Features
• High Quality, German engineered components
• Simply turn over the complete assembly or swivel lance and you have access to two different nozzles
• Water sprays through one nozzle port at a time since a stainless steel ball covers the opposite port
• Nozzle housing is made of an impact resistant plastic, manufactured of corrosion resistant material
• Spray depends on 2 nozzles used

Specifications
• Max Pressure: 3,600 PSI
• Max Flow: 8 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Note: 1/4” MPT Nozzles not included
• Weight: 0.51 lb

Features
• High Quality, German engineered components
• Stainless Steel
• Adjustable 270 degree (+/-135°)

See in action on YouTube

Specifications
• Max Pressure: 5,070 PSI
• Max Flow: 10 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female
• Outlet: 1/4" Female
• Note: 1/4” MPT Nozzle not included
• Weight: 0.30 lb

Features
• High Quality, German engineered components
• Stainless Steel
• Adjustable 270 degree (+/-135°)

See in action on YouTube

Specifications
• Max Pressure: 5,070 PSI
• Max Flow: 10 GPM
• Max Temp: 300° F.
• Inlet: 1/4" Female
• Outlet: 1/4" Male
• Note: Nozzle not included
• Weight: 0.32 lb

Suttner Pivotable & Lockable ST-330 Stainless Steel Nozzle Holder 5,070 PSI 1/4” F x 1/4” F. Swivel it easily!

Features
• High Quality, German engineered components
• Pivotable and lockable
• Used for cleaning of places which are difficult to access such as container e.g. feeding troughs and gutters
• Effortless and variable shifting of the swivel direction
• Made out of stainless steel
• Capable of swiveling by up to 240°

Specifications
• Max Pressure: 5,070 PSI
• Inlet: 1/4" Female
• Outlet: 1/4" F NPT
• Material: Stainless steel
• Note: 1/4” MPT Nozzle not included
• Weight: 0.40 lb

Suttner ST-58 Change Over Valve 5,000 PSI 1/4" FPT. Suttner ST58 change-over design allows you to switch between lances and nozzles with a twist

Features
• Stainless steel
• No roll over nozzle
• Corrosive resistant

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 200° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 0.85 lbs