General Pump

General Pump DHRA50450SS 3/8" x 450', 3/4" x 250' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 450’
• Capacity 5/8" Garden Hose: 325’
• Capacity 3/4" Garden Hose: 250’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 48.0 lbs

General Pump DHRA50300SS 3/8" x 300', 3/4" x 175' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 300’
• Capacity 5/8" Garden Hose: 225’
• Capacity 3/4" Garden Hose: 175’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 41.97 lbs

General Pump DHRA50150SS 3/8" x 150', 3/4" x 100' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 150’
• Capacity 5/8" Garden Hose: 125’
• Capacity 3/4" Garden Hose: 100’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 34.15 lbs

Set of General Pump D80008 Pressure Washer 2-1/2" x 1" Replacement Rubber Feet. Perfect for pressure washer carts and frames

Specifications
• Includes four replacement feet, 2.5” Diameter x 1.0” Thick
• Mounting hardware not included
• Weight: 1.10 lbs

Set of General Pump D80007 Pressure Washer 1-1/4" x 3/4" Replacement Rubber Feet. Perfect for pressure washer carts and frames

Specifications
• Includes four replacement feet
• 1.25” Diameter
• 0.75” Thick
• 1/4” Hole
• 60 Duro EPDM
• Mounting hardware not included
• Weight: 3 oz

General Pump YGR1000P Gear Reducer for 2.2 to 1, 1″ Shafted Engines, Up to 24 HP, J609A Flange, 47, 47SS and 66 Series pumps

Features:
• Compact and lightweight
• Hardened steel helical gears for quiet operation
• Oil bath lubrication
• Dual bearing design for extended life
• J609a Flange mounts to most gasoline engines

Specifications:
• Horse Power: 18 - 24
• Drive Ratio: 2.176:1
• Maximum Pump Speed: 1,450 RPM
• Oil Capacity: 10 Oz
• Oil Grade: SAE90 Gear Lube
• Input (motor) Shaft Ø": 1”
• Output (pump) Shaft Ø": 24 mm
• Motor Flange (SAE): J609A
• Pump Flange: Fits 47, 47SS and 66 Series General Pump
• Weight: 5.8 lb.

PA FL7 / General Pump YFL7SWITCH 5,650 PSI Mount In Any Position Flow Switch

Features
• Can be installed horizontally or vertically
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnetic probe casing made of antiflame material

FL7 Data Sheet

Specifications
• Rated Pressure: 5,100 PSI
• Permissible Pressure: 5,650 PSI
• Max Flow Rate: 8 GPM
• Activation Flow Rate: Horizontal: 1.6 GPM
• Activation Flow Rate: Vertical: 2.4 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electric Cable: 2x0,5 mmq. - 0
• Electrical insulation: 55 IP - 0
• Inlet: 3/8 Bsp F
• Outlet: 3/8 Bsp F
• Weight: 15.38 oz.

PA FL3 / General Pump YFLOSWITCH 4,050 PSI Mount In Any Position Flow Switch

Features
• Can be installed horizontally or vertically
• Reed switch with high resistance
• Reduced dimensions both axial and lateral
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnet covered by plastic casing to minimize the braking effect of metal particles and scale

FL3 Data Sheet

Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Activation Flow Rate: Horizontal: 0.8 GPM
• Activation Flow Rate: Vertical: 0.8 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electric Cable: 2x0,5 mmq. - 0
• Electrical insulation: 55 IP - 0
• Inlet: 3/8 Bsp F
• Outlet: 3/8 Bsp F
• Weight: 10.58 oz.

General Pump 2660059 Brush Assembly for DCFSCP20 & DCFSCP20GZ
• Size: 20" x 20" x 2"
• Weight: lb

PA TR1 /GP YADJNOZ Adjustable Hi / Low Nozzle Holder. The adjustable nozzle holder TR1 can work with pressures up to 4,050 PSI and with flow rates up to 8 GPM

Features
• By turning the plastic protection it is possible to switch from high to low pressure
• This type of device is normally used with high-pressure cleaners that provide for the mixing of water with chemical product by means of a Venturi injector

Specifications
• Rated Pressure: 3,650 PSI
• Permissible Pressure: 4,050 PSI
• Rated Flow Rate: 8 GPM
• Rated Temperature: 300° F.
• Body Material: Brass
• Inlet: 1/4 Npt F
• Outlet: 1/4 Npt F
• Weight: 4.06 oz.
• Note: Requires one 1/4” MPT nozzle, which is not included

General Pump D10118 2 Way Steel Unloader Mounting Block, 3/8" NPT-F x 3/8" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 5,500 PSI
• Material: Steel, with YZD Finish

General Pump D10119 3 Way Brass Unloader Manifold Block, 3/8" NPT-F, Bolt-down

Features:
• Mounting blocks provide flexibility to mount additional accessories to your system

Specifications Sheet

Specifications:
• Max Pressure: 4,000 PSI
• Material: Brass