General Pump

General TMT Flow Switch With Pilot Feature

Features
• Micro-switch technology eliminates reed switch
• Activates with as little as .5 gpm flow
• Minimal pressure drop up to 12 gpm flow
• Mount in vertical position

Specifications
• Maximum Operating Pressure: 4,000 PSI
• Minimum Flow Required for Activation: 0.5 GPM @ 50 PSI
• Maximum Operating Flow: 12.0 GPM
• Operating Temperature Range: 40 - 180 ºF
• Electrical Lead Length: 48” - 18AWG
• Max Switching Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Inlet: 3/8” x 18 NPT-F
• Outlet: 3/8” x 18 NPT-F
• Pilot: 1/4” Hose Barb
• Material: Buna-N, Brass, Plastic, Nickel Plated Neodymium
• Weight: 1.3 Lb

General Pump 100295 Series 100 Oil, 16 oz. Bottle. General Industrial Oil is a premium multi-purpose lubrication formulated to protect against rust and oxidation. It offers long service life and prevents sludge and varnish formation, even at high temperatures

Features:
• General Industrial Oil possesses a high natural viscosity index. This means more constant operating characteristics over wide temperature range
• Recommended for use in General Pump crankcases on systems requiring less than 25 BHP. Initial oil change after break-in period between 50 and 100 hours. Then every three months of 300 hours of operation thereafter. Check oil level in crankcase daily or before each use.
• Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance

Specifications:
• Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston and plunger pumps
• Resists foaming and aeration
• Highly resistant to oxidation that would result in sludge formation
• Resistas formation of harmful oil water emulsions
• Compatible with typically used seals and gaskets
• High viscosity index (IV) means more constant operating characteristics over wide temperature ranges
• Low pour point assures fluid flow during cold weather operation
• Outstanding thermal and hydrolytic stability assures long oil life
• Exceeds wear prevention requirements of all major hydraulic pump manufactures
• Packaged in one 16 oz bottle
• Weight: 1 lbs

General 47200274 Pump Rail / Foot 2-5/8", 47, 66 Series, Tall

General Pump 100315 Jetter Valve, use with TT and TC Pumps (Replaces Valve Cap). Allows standard triplex pump to generate flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications

Features:
• Simple operation allows both full-flow and pulsation modes
• Large easy-to-grasp handle allows gloved operation
• Designed and made in the USA.
• Easy installation - simply replace middle valve cap and valve on Pump

TPR HE 250 Data Sheet

Specifications:
• Work on these Pumps: TT & TC Series
• Maximum Pressure: 3,500 PSI
• Materials: Brass, Buna-N, Teflon, Stainless Steel
• Weight: 0.5 lb

General Pump 100316 Jetter Valve, use with EZ, EP, ES/ESN Pumps (Replaces Valve Cap). Allows standard triplex pump to generate flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications

Features:
• Simple operation allows both full-flow and pulsation modes
• Large easy-to-grasp handle allows gloved operation
• Designed and made in the USA.
• Easy installation - simply replace middle valve cap and valve on Pump

TPR HE 250 Data Sheet

Specifications:
• Work on these Pumps: EZ, TX63, EP ES, ES/N Series
• Maximum Pressure: 3,500 PSI
• Materials: Brass, Buna-N, Teflon, Stainless Steel
• Weight: 0.5 lb

General Pump 101065 Jetter Valve, use with ET Pumps (Replaces Valve Cap). Allows standard triplex pump to generate flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications

Features:
• Simple operation allows both full-flow and pulsation modes
• Large easy-to-grasp handle allows gloved operation
• Designed and made in the USA.
• Easy installation - simply replace middle valve cap and valve on Pump

TPR HE 250 Data Sheet

Specifications:
• Works on these Pumps: ET Series
• Maximum Pressure: 3,500 PSI
• Materials: Brass, Buna-N, Teflon, Stainless Steel
• Weight: 0.5 lb

General Pump 100072 Jetter Valve, use with 47 Series Pumps (replaces valve cap, fine thread). Allows standard triplex pump to generate flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications

Features:
• Simple operation allows both full-flow and pulsation modes
• Large easy-to-grasp handle allows gloved operation
• Designed and made in the USA.
• Easy installation - simply replace middle valve cap and valve on Pump

TPR HE 250 Data Sheet

Specifications:
• Works on these Pumps: 47 Series (Fine Thread)
• Maximum Pressure: 3,500 PSI
• Materials: Brass, Buna-N, Teflon, Stainless Steel
• Weight: 0.5 lb

General Pump 100317 Jetter Valve, use with 47 Series Pumps (replaces valve cap, coarse thread). Allows standard triplex pump to generate flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications

Features:
• Simple operation allows both full-flow and pulsation modes
• Large easy-to-grasp handle allows gloved operation
• Designed and made in the USA.
• Easy installation - simply replace middle valve cap and valve on Pump

TPR HE 250 Data Sheet

Specifications:
• Works on these Pumps: 47 Series (Coarse Thread)
• Maximum Pressure: 3,500 PSI
• Materials: Brass, Buna-N, Teflon, Stainless Steel
• Weight: 0.5 lb

General Pump DFV5010 Industrial 5,000 PSI 10 GPM Foot Valve. Foot controlled valves allow both hands to be free to control the sewer hose. Pulling sewer hose back and forth flushes the pipes

Features:
• Offers hands-free operation!
• Sturdy, heavy-gauge steel construction
• Powder coated for durability
• Reliable design
• Protected pedal guards against accidental activation
• Includes 2103331 Fitting Kit

Specifications:
• Maximum Pressure: 5,000 PSI
• Max. Flow Rate: 10.0 GPM
• Max. Temp.: 320º F
• Inlet: 3/8-18 NPT-F
• Outlet: 1/4-18 NPT-F outlet
• Weight: 19.6 lbs.

General Pump Full Slide Hammer

Data Sheet

Specificatons:
• Used for General Pump Clutch Assemblies 100687, 100688, 100717, 100718, 100719, 100720
• Use with 520297m clutch centering tool
• Weight: 11.0 lbs

General Pump Clutch Centering Tool

Data Sheet

Specificatons:
• Used for General Pump Clutch Assemblies 100687, 100688, 100717, 100718, 100719, 100720
• 1/2"-13 Threaded Hole
• Use with 100163 Slide-hammer or bolt.
• Weight: lbs