General KE28HA Stainless Steel 2, 170 PSI 16.1 GPM Triplex Plunger Pump. A “New Generation” Pump
Features:
• Patent-pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion
• Low-high pressure packing design with integrated cooling system
• High volumetric efficiency suction/delivery valves featuring new spherical design of sealing areas
• Splash lubrication
Materials:
• High resistance light alloy die cast aluminum crankcase
• 420 Stainless steel manifold, nickel treated
• Taper roller bearings
• Special antifriction, forged, light alloy connecting rods
• Forged alloy steel crankshaft, hardened, tempered and nitrited
• Cast iron piston guide, nickel treated
• Solid ceramic plungers
• Stainless steel valves
• Pumps are also available with 316 SS packing components. These models use prefix “KEN”
Specifications:
• Maximum Inlet Pressure: 45 PSI
• Max. GPM: 16.1
• Max. PSI: 2,170
• Max. Fluid Temp.: 140° F.
• Inlet Port Thread: 1” NPT-F
• Discharge Port Thread: 1/2” NPT-F
• Shaft Diameter: 1.181”/30 mm
• Pump Dimensions: 15.2” x 13.4” x 7.7”
• Shipping Weight: 88.0 lb.
General Pump DCFSCS22Z 22" Hammerhead Professional Stainless Steel Flat Surface Cleaner with Casters. The gun has a revolutionary compensating design to reduce fatigue. The cleaner glides easily across the surface uniformly cleaning pool decks, sidewalks, garage floors and more
FEATURES
• Compensating gun feature
• Full 22” cleaning path
• Heavy-duty anodized aluminum components
• Rugged Stainless Steel cover, handle, and casters
• Swivel has grease zerk fitting for bearing lubrication
• Stainless Steel inlet filter for water filtration
• Supplied with 3-nozzle rotating arm
SPECIFICATIONS
• Max Flow: 8 GPM
• Operating Pressure: 1,000 – 4,000 PSI
• Max. Temp.: 180° F
• Nozzles: 925020M (3)
• Trigger Gun Inlet: 3/8" NPT-F
• Optimal performance if used with a 3 GPM or more pressure washer
• Dimensions-Retracted 70” x 23” x 23”
• Shipping Weight 28 lbs
General Pump Replacement 22mm-14 Twist Coupler O-Ring (EPDM)
Specifications
• Fits 22mm-14 twist coupler sockets from AR, Comet, General, MTM Hydro, PA and others
• Material: EPDM
• Max. Temperature: 250° F
• Color: Black
General Pump DCFSCP24GZ 24" Hammerhead Professional Flat Surface Cleaner with Casters. The gun has a revolutionary compensating design to reduce fatigue. The cleaner glides easily across the surface uniformly cleaning pool decks, sidewalks, garage floors and more
FEATURES
• Compensating gun feature
• Full 24” cleaning path
• Heavy-duty anodized aluminum components
• Rugged ABS cover
• Swivel has grease zerk fitting for bearing lubrication
• Two Stainless Steel bearings for better performance
• Stainless Steel inlet filter for water filtration
• Supplied with 3-nozzle rotating arm
• 4 Casters
SPECIFICATIONS
• Max Flow: 8 GPM
• Operating Pressure: 1,000 – 4,000 PSI
• Max. Temp.: 180° F
• Nozzles: 925020M (3)
• Trigger Gun Inlet: 3/8" NPT-F
• Optimal performance if used with a 3 GPM or more pressure washer
• Dimensions-Retracted 70” x 25” x 25”
• Shipping Weight 26 lbs
General Pump D10117 3 Way Brass Unloader Manifold Block, 1/2" NPT-F x 1/2" NPT-F x 3/8" NPT-F
Features:
• Mounting blocks provide flexibility to mount additional accessories to your system
Specifications:
• Max Pressure: 4,000 PSI
• Material: Brass
General Pump D10119 3 Way Brass Unloader Manifold Block, 3/8" NPT-F, Bolt-down
Features:
• Mounting blocks provide flexibility to mount additional accessories to your system
Specifications:
• Max Pressure: 4,000 PSI
• Material: Brass
General EP1512S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.
Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal
WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.
Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 3,045 PSI
• Horsepower: 6.0 EBHP
• Max. Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 15.4 lb.
General EP1513S17 Triplex EP Series 1,750 RPM Solid Shaft Plunger Pump.
Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal
WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.
Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.2 GPM
• Max. Discharge Pressure: 3,045 PSI
• Horsepower: 6.5 EBHP
• Max. Pump Speed: 1,750 RPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Replaces TX1513S17
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 15.4 lb.
General EP1510S34 Triplex EP Series 3,400 RPM Solid Shaft Plunger Pump.
Features:
• Triplex plunger pump
• New Forged brass manifold
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal
Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.2 GPM
• Max. Discharge Pressure: 3,045 PSI
• Horsepower: 8.7 HP
• Max. Pump Speed: 3,400 RPM
• Oil Capacity: 15 oz
• Max. Fluid Temp.: 165 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Replaces TT9441
• Weight: 15.4 lb.
General TS1811 Triplex Plunger Pump 3,500 PSI 4.5 GPM 1,450 RPM / 3,500 PSI 4.0 GPM 1,290 RPM / 3,500 PSI 5.0 GPM 1,610 RPM
Features:
• The preferred pump frame in the pressure cleaning industry
• Forged brass manifold with an exclusive lifetime warranty
• Large capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Available in left-handed “L” version
Specifications:
• Series 47 Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.5 / 4.0 / 5.0 GPM
• Max. PSI: 3,500
• Max. Pump Speed: 1,450 / 1,290 / 1,610 RPM
• Shaft Diameter: 24mm Solid
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8- BSPP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.