Mecline

Newly introduced Mecline VRT3 Unloader is an updated version of the Arrow Line VRT unloader with a stronger valve body with less porosity. The pressure adjustment handle was redesigned for easier operation at all pressure levels.

New Design Features:
• Interior Design – more efficient flow and operation
• Dual Locking Nuts – vibration resistant for setting maximum pressures
• New Spring Material – more resistant to fatigue, powder paint resists rusting
• Piston – large diameter, more strength and contact area for shifting alignment
• Discharge Nipple – sealing o-ring has been moved to the lower part of the thread, increases hydro strength and fitting strength
• Shutter Valve – hex design, less contact area for smooth shifting (prevents binding). larger size, longer life and more positive shifting

Featuring:
• Over sized handle – easier adjustment
• Forged valve body – excellent strength
• Two inlet ports
• Two by-pass ports
• Ultra thick inlet and discharge ports - added strength
• Color coded springs and caps – easy valve identification
• All ports are FNPT

Specifications:
• Spring Color: Yellow
• Maximum Pressure: 2,320 PSI
• Rated Flow: 10.5 GPM
• Adjustable pressure
• Brass valve body
• Max. Fluid Temp.: 194° F.
• Inlet Ports (2): 3/8" FNPT
• Discharge Ports (1): 3/8” FNPT
• Bypass Ports (2): 3/8” FNPT
• Weight: 27.9 oz

Mecline VRT310-EZ Unloader Plumbing Kit for Pressure Washer Pump with Safety Relief and EZ Start– 4,495 PSI Max. This unloader kit has all the components to make installation easy

Specifications:
• Works with pumps that have 1/2” FPT inlet and 3/8” FPT Outlet
• Safety relief vale protects equipment and people with adjustable “Pop Off” protection
• Built-In easy start valve relieves back pressure during engine start up
• Maximum Pressure: 4,495 PSI
• Max. Volume: 8.0 GPM

COMPONENT:
• Mecline VRT3-310EZ Adjustable Unloader Valve 4,500 PSI with EZ Start
• GP Safety pressure relief valve with adjustable range: 1,000 - 6,000 PSI
• 3/8” Steel street elbow
• 24” of push-on bypass hose
• 1/4” Male push on fitting
• 3/8” Male push-on fitting
• 3/8M x 3/8M Hex Nipple Steel
• GP Thermal relief valve protects pump from overheating
• GP Duraview water inlet filter with garden hose connection
• 3/8” QC socket
• 3/8” QC plug
• Roll of Teflon tape
• Note: Pump in 2nd picture is not included and kit may look different than shown in picture
• Unloader Must Be Installed Vertically For Proper Operation
• Weight: 5 lb

Mecline VRT310-EZ Unloader Plumbing Kit for Pressure Washer Pump with EZ Start– 4,495 PSI Max. This unloader kit has all the components to make installation easy

Specifications:
• Works with pumps that have 1/2” FPT inlet and 3/8” FPT Outlet
• Built-In easy start valve relieves back pressure during engine start up
• Maximum Pressure: 4,495 PSI
• Max. Volume: 8.0 GPM

COMPONENT:
• Mecline VRT3-310EZ Adjustable Unloader Valve 4,500 PSI with EZ Start
• 24” of push-on bypass hose
• 1/4” Male push on fitting
• 3/8” Male push-on fitting
• 3/8M x 3/8M Hex Nipple Steel
• GP Thermal relief valve protects pump from overheating
• GP Duraview water inlet filter with garden hose connection
• 3/8” QC socket
• 3/8” QC plug
• Roll of Teflon tape
• Note: Pump in 2nd picture is not included and kit may look different than shown in picture
• Unloader Must Be Installed Vertically For Proper Operation
• Weight: 5 lb

Mecline MV2008/B Spray Gun & 24" Zinc Plated Lance Extension 3,200 PSI

Kit Components:
• Mecline MV2008/B 20” Spray Gun
• 24” Zinc plated extension wand with 22mm-14 Male twist connect inlet & 1/4” QC Socket outlet

Specifications:
• Max Pressure: 3,200 PSI
• Max Flow: 7.0 GPM
• Max Temperature: 140° F
• Trigger Gun Inlet: 22mm-14 Male twist connect
• 24” Lance Outlet: 1/4" Female QC socket (accepts QC color coded nozzles)
• Note: Nozzles are not included
• Weight: 2.1 lbs

Mecline MV2009 Spray Gun & 24" Zinc Plated Lance Extension 4,000 PSI

Kit Components:
• Mecline MV 2009 20” Spray Gun
• 24” Zinc plated extension wand with 22mm-14 Male twist connect inlet & 1/4” QC Socket outlet

Specifications:
• Max Pressure: 4,000 PSI
• Max Flow: 8.0 GPM
• Max Temperature: 140° F
• Trigger Gun Inlet: 3/8” Female NPT
• 24” Lance Outlet: 1/4" Female QC socket (accepts QC color coded nozzles)
• Note: Nozzles are not included
• Weight: 2.25 lbs

Mecline MV2008/B Spray Gun & 18" Zinc Plated Lance Extension 3,200 PSI

Kit Components:
• Mecline MV2008/B 20” Spray Gun
• 18” Zinc plated extension wand with 22mm-14 Male twist connect inlet & 1/4” QC Socket outlet

Specifications:
• Max Pressure: 3,200 PSI
• Max Flow: 7.0 GPM
• Max Temperature: 140° F
• Trigger Gun Inlet: 22mm-14 Male twist connect
• 18” Lance Outlet: 1/4" Female QC socket (accepts QC color coded nozzles)
• Note: Nozzles are not included
• Weight: 1.9 lbs

Mecline Shoulder Support for ML 210, ML 510, ML 710 ML210, ML510 & ML710 Trigger Guns

Specifications
• Inlet: 1/4" Male
• Size: 13" L x 5.5” W
• Weight: 9.0 oz

Mecline ML 710 High Pressure Trigger Gun. This 9,280 PSI rated trigger gun comes with 3/8 F inlet x 3/8 F outlet

Specifications
• Permissible Pressure: 10,150 PSI
• Rated Pressure: 9,280 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temperature: 250° F
• Inlet: 3/8" Female
• Outlet: 3/8" Female
• Weight: 30.0 oz

Mecline ML 210 High Flow Trigger Gun. This 53 GPM rated trigger gun comes with 3/4 F inlet x 1/2 F outlet

Specifications
• Permissible Pressure: 3,200 PSI
• Rated Pressure: 2,900 PSI
• Rated Flow Rate: 53.0 GPM
• Rated Temperature: 250° F
• Inlet: 3/4" Female
• Outlet: 1/2" Female
• Weight: 36.33 oz

Mecline L70 48” High Pressure Stainless Steel 3/8” Lance with Handle. This 9,280 PSI rated stainless steel lance comes with a vented grip and 1/4 F NPT outlet

Specifications
• Length: 48.0”
• Permissible Pressure: 10,150 PSI
• Rated Pressure: 9,280 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temperature: 320° F
• Inlet: 3/8" Male
• Outlet: 1/4" Female NPT (nozzle holder)
• Weight: 64.0 oz

Mecline L70 32” High Pressure Stainless Steel 3/8” Lance with Handle. This 9,280 PSI rated stainless steel lance comes with a vented grip and 1/4 F NPT outlet

Specifications
• Length: 32.3”
• Permissible Pressure: 10,150 PSI
• Rated Pressure: 9,280 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temperature: 320° F
• Inlet: 3/8" Male
• Outlet: 1/4" Female NPT (nozzle holder)
• Weight: 42.0 oz

Mecline ML510 High Pressure Trigger Gun. This 7,250 PSI rated trigger gun comes with 1/2 F inlet x 1/2 F outlet

Specifications
• Permissible Pressure: 8,100 PSI
• Rated Pressure: 7,250 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temperature: 250° F
• Inlet: 1/2" Female
• Outlet: 1/2" Female
• Weight: 35.98 oz

Features:
• Easy Pull Trigger
• Made in Italy with high quality components
• Smooth trigger action and comfortable feel
• Automatic trigger shutoff and trigger lock

Specifications:
• Max Pressure: 4,500 PSI
• Max Flow: 8.0 GPM
• Max Temp: 320° F.
• Inlet: 3/8" Female
• Outlet: 1/4" Female
• Replaces the MV920
• Weight: 16.08 oz

Features:
• Integral microswitch detects full bypass mode
• Microswitch contained in an electrical box IP55, with three core cable for connection with the electrical system of the pressure cleaner
• Positioning of all o-ring seals before the threads, for greater mechanical strength
• Shutter axially guided for greater stability at high flow rates
• Stainless steel seat and shutter designed by fluid dynamics study to eliminate instabilities and turbulences with great benefit in terms of long life
• Stem with internal anti-rotation system, for greater life
• Stem o-ring seal is placed on the connecting stem guide to allow the stroke of the stainless steel stem on o-ring, increasing the life
• Hexagonal check valve for a better smoothness

Specifications:
• Spring Color: Yellow
• Rated Pressure: 2,465 PSI
• Permissible Pressure: 2,760 PSI
• Rated Temperature: 194° F
• Rated Flow Rate: 26.4 GPM
• Micro Switch: 6 A, 250 V, 47.24” Cable length
• Material: Brass body & fittings
• Inlet Port: 1/2" F
• Outlet Port: 1/2” F
• Bypass Port: 1/2” F
• Weight: 47.80 Oz

Features:
• Integral microswitch detects full bypass mode
• Microswitch contained in an electrical box IP55, with three core cable for connection with the electrical system of the pressure cleaner
• Positioning of all o-ring seals before the threads, for greater mechanical strength
• Shutter axially guided for greater stability at high flow rates
• Stainless steel seat and shutter designed by fluid dynamics study to eliminate instabilities and turbulences with great benefit in terms of long life
• Stem with internal anti-rotation system, for greater life
• Stem o-ring seal is placed on the connecting stem guide to allow the stroke of the stainless steel stem on o-ring, increasing the life
• Hexagonal check valve for a better smoothness

Specifications:
• Spring Color: Blue
• Rated Pressure: 4,640 PSI
• Permissible Pressure: 5,075 PSI
• Rated Temperature: 194° F
• Rated Flow Rate: 26.4 GPM
• Micro Switch: 6 A, 250 V, 47.24” Cable length
• Material: Brass body & fittings
• Inlet Port: 1/2" F
• Outlet Port: 1/2” F
• Bypass Port: 1/2” F
• Weight: 48.33 Oz

Features:
• Damping of the pressure spikes
• Total flow discharge

Note:
• Becomes a safety device only after set-up adjustment done by installer

Specifications:
• Rated Pressure: 5,220 PSI
• Permissible Pressure: 5,800 PSI
• Minimum Adjustable Pressure: 522 PSI
• Rated Temperature: 194° F
• Rated Flow Rate: 6.6 GPM
• Material: Brass
• Inlet Ports (2): 3/8" F
• Outlet Port: 3/8” F
• Weight: 17.28 Oz

Features:
• Damping of the pressure spikes
• Total flow discharge

Note:
• Becomes a safety device only after set-up adjustment done by installer

Specifications:
• Rated Pressure: 3,625 PSI
• Permissible Pressure: 4,060 PSI
• Minimum Adjustable Pressure: 362 PSI
• Rated Temperature: 194° F
• Rated Flow Rate: 6.6 GPM
• Material: Brass
• Inlet Ports (2): 3/8" F
• Outlet Port: 3/8” F
• Weight: 13.64 Oz

Features:
• Damping of the pressure spikes
• Total flow discharge

Note:
• Becomes a safety device only after set-up adjustment done by installer

Specifications:
• Rated Pressure: 2,200 PSI
• Permissible Pressure: 2,450 PSI
• Minimum Adjustable Pressure: 362 PSI
• Rated Temperature: 194° F
• Rated Flow Rate: 6.6 GPM
• Material: Brass
• Inlet Ports (2): 3/8" F
• Outlet Port: 3/8” F
• Weight: 13.51 Oz