MTM Hydro

Specifications
• Fits all standard 1/4" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black
• Replaces QCO1B-100 Pack
• Quantity: 100

Specifications
• Fits all standard 1/4" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black
• Replaces QCO1B-25 Pack
• Quantity: 25

Specifications
• Fits all standard 1/4" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO1V-100 PACK
• Quantity: 100

Specifications
• Fits all standard 1/4" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown
• Replaces QCO1V-25 Pack
• Quantity: 25

MTM Hydro 24” pressure washer zinc plated extension wand with 22mm-14 male twist connect inlet & 1/4” QC socket outlet

Specifications
• Length: 24"
• Pipe: 1/4” Zinc plated steel
• Inlet: 22mm-14 Male twist connect
• Outlet: 1/4" Female Quick Connect Socket
• Max Pressure: 4,100 PSI
• Max Flow: 10.5 GPM
• Max Temp: 300° F.
• Weight 1.25 lbs

Specifications:
• Size: 3/4" ID x 1-3/8" OD
• Overall Width: 7/16”
• Flange OD: 1-1/2”
• Material: Steel
• Weight: 0.10 lbs

Specifications:
• Size: 3/4" ID x 1-3/8" OD
• Overall Width: 11/16”
• Flange OD: 1-9/16”
• Material: Nylon
• Weight: 0.05 lbs

Specifications
• Fits all standard 3/8" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black QCO2B-100 PACK
• Quantity: 100

Specifications
• Fits all standard 3/8" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black
• Replaces QCO2B-25 Pack
• Quantity: 25

The all new MTM Hydro 24.5004 15mm Twist Plug adapter offers you a consolidated option to adapt to proprietary M22 fittings that, previously kept you from upgrading the stock guns provided by the manufacturer

Standard pressure washers will have a 14mm stem required, however, in the image provided you can see the enlarged stem receiver. Some manufacturers have changed to 15mm to prevent you from upgrading through the use of aftermarket accessories, until now!

This premium adapter has been quality tested and certified by MTM Hydro to fit a variety of hose outlets including select popular models of Sunjoe, Ryobi, AR Blue Clean consumer units, and Greenworks so that you can, now, upgrade your guns and lance setups to MTM Hydro’s Italian SG series. Keep in mind, you could also upgrade your entire setup to Kobrajet hose with the use of the 24.5005 fitting for these same residential pressure washers

Specifications
• 3/8" QC socket
• Male M22, Yoke/Stem: 15MM
• 4,000 PSI max. pressure
• Wight: 0.25 lbs

Specifications
• Fits all standard 3/8" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO2V-100 PACK
• Quantity: 100

Specifications
• Fits all standard 3/8" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO2V-25 PACK
• Quantity: 25

Specifications:
• Size: 5/8" ID x 1-3/8" OD
• Overall Width: 1/2”
• Flange OD: 1-1/2”
• Material: Steel
• Weight: 0.10 lbs

Specifications:
• Size: 5/8" ID x 1-3/8" OD
• Overall Width: 11/16”
• Flange OD: 1-9/16”
• Material: Nylon
• Weight: 0.05 lbs

MTM Hydro 24.0100 Brass Top Mount Pressure Gauge Quick Disconnect Fitting

MTM Hydro's Brass Pressure Gauge Fitting with Port is meant to be paired with a 1/4” bottom-mount pressure gauge (Not included). With 3/8" Quick Couplers on both ends, this tool can quickly be relocated anywhere in your pressurized line to measure baseline and performance pressure

Specifications
• Material: Brass & stainless steel
• Gauge Port: 1/4” Female
• Max. Pressure: 2,700 PSI
• Wight: 0.31 lbs

Features
• For use when high and low pressures are needed
• For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 195° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 6.1 oz.
• Note: Requires one 1/4” MPT spray nozzle and one 1/4” MPT soap nozzle, which are not included