We accept

Checkout

0
Newsletter

MTM Hydro

Sort by
Display per page

Hi Lo Trombone Valve 1/4" FNPT Inlet x (2) 1/4" FNPT Outlets

SKU: 20.0073

MTM Hydro Hi Lo Trombone Valve 1/4" FNPT Inlet x (2) 1/4" FNPT Outlets. Nozzle holder switches between the right and left nozzle ports by pushing or pulling the trombone (knob)


Features
• For use when high and low pressures are needed
• For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure


Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 195° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 6.1 oz.
Note: Requires one 1/4” MPT spray nozzle and one 1/4” MPT soap nozzle, which are not included

  Price: $19.86

Karcher K Series Bayonet Style Pressure Washer Fitting, Plastic

SKU: BAY-KARCHER-PL

Karcher K Series Bayonet Style Pressure Washer Fitting

• Material: Plastic
• Inlet: 1/4” Female NPT
• Max Pressure: 2,200 PSI
• Max Flow: 8.0 GPM
• Max Temp: 140° F
• May need optional ¼” x ¼” male fitting # 140754 shown below
• Weight: 0.15 lb

  Price: $9.54

Laser Sewer Nozzle 1/4", # 4.5

SKU: NSLAS1-045

1/4” Stainless Steel Laser Sewer Jetter Nozzle, # 4.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.


Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction


Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

  Price: $6.17

Laser Sewer Nozzle 1/4", # 5.5

SKU: NSLAS1-055

1/4” Stainless Steel Laser Sewer Jetter Nozzle, # 5.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.


Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction


Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 5.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

  Price: $6.09

Laser Sewer Nozzle 1/8", # 4.0

SKU: NSLAS0-040

1/8” Stainless Steel Laser Sewer Jetter Nozzle, # 4.0. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.


Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction


Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 4.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.3 oz.


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

  Price: $4.95

Laser Sewer Nozzle 1/8", # 5.0

SKU: NSLAS0-050

1/8” Stainless Steel Laser Sewer Jetter Nozzle, # 5.0. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.


Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction


Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 5.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.3 oz.


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

  Price: $4.95

Laser Sewer Nozzle 3/8", # 4.5

SKU: NSLAS2-045

3/8” Stainless Steel Laser Sewer Jetter Nozzle, # 4.5. Power penetrating forward jet of the LASER nozzle cuts through ice, sludge, and grease while still providing the thrust to propel the hose down the line.


Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction


Specifications
• Inlet: 3/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.


Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

  Price: $7.21

M22-14MM F x M22-14MM F Twist Coupler Socket Adapter

SKU: 24.0456


M22-14MM F x M22-14MM F Twist Coupler Socket Adapter. This standard M22-14MM adapter works with most pressure washers


Features:
• Secure twist connection
• Precision machined
• High-Impact plastic Knob
• Internal o-ring seal


Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass & Zinc plated steel
• Outlet: Female M22-14MM F
• Inlet: Female M22-14MM F
• Weight: 0.30 lbs.

  Price: $5.18

M22-14MM M x M22-14MM M Twist Coupler Plug

SKU: 24.0024


M22-14MM M x M22-14MM M Twist Coupler Plug


Features:
• Precision machined


Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass
• Inlet: Male M22-14MM M
• Outlet: Male M22-14MM M

  Price: $3.16

MTM Astra 320 Trigger Gun 5000 PSI, 11.5 GPM

SKU: 10.0007

MTM Astra 320 Trigger Gun 5,000 PSI


Features:
• Combines Power and Performance with Comfort and Durability
• Unitized Valve
• Forged bronze body
• Glass-Filled nylon handle

Specifications:
• Max Pressure: 5,000 PSI
• Max Flow: 11.5 GPM
• Maximum Temperature: 300° F.
• Color: Black
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight 23 oz lbs

  Price: $38.76

MTM Brass Nozzle Orifice Cleaner / Unclogger Tool

SKU: 17.0703


MTM Hydro's Brass Nozzle Cleaner feature a 1/4" QC plug for easy storage and a 0.8mm diameter cleaning pin for even the smallest nozzles. Keep your nozzles in top condition by regularly cleaning them to ensure optimum pressure and GPM


Specifications:
• Body & Cap Material: Brass
• Pin Size: 0.8MM (3.0 Nozzle size or greater)
• QC Plug: 1/4”
• Weight: 0.10 lbs

  Price: $6.65

MTM Hydro 1/2" Premium Plated Brass Ball Valve 3,000 PSI

SKU: 20.0033


MTM Hydro 20.0033 1/2" Premium Plated Brass Ball Valve 3,000 PSI. MTM Hydro's High Pressure Plated Brass Ball valves are found in a variety of areas in the pressure washing system


Features
• Most commonly, this round-edged, light weight, heavy duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality
• When installing NPT fittings in these BSP threads, be sure to wrap threads 6-7 times with Teflon tape or 2-3 drops of Loctite


Injector Specifications:
• Max Pressure: 3,000 PSI
• Max Temperature: 176° F
• Inlet: 1/2" Female BSP
• Outlet: 1/2" Female BSP
• Body Material: Plated brass
• Weight: 1.45 lb

  Price: $41.37

MTM Hydro 1/4" Stainless Steel Ball Valve 6,000 PSI

SKU: 20.0038


MTM Hydro 20.0038 1/4" Stainless Steel Ball Valve 6,000 PSI. MTM Hydro's Stainless Steel Ball Valves are a great solution for High Pressure and Chemical environments


Features
• Stainless steel ball valves are commonly installed in in agricultural and food production environments that use corrosive cleaning agents and require equipment that will last
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• These models are typically seen at ceiling shutoff locations, at the base of the spray gun, or along wall mounted systems to open and close additional lines


Injector Specifications:
• Max Pressure: 6,000 PSI
• Max Temperature: 176° F
• Inlet: 1/4" Female
• Outlet: 1/4" Female
• Body Material: Stainless Steel
• Weight: 0.65 lb

  Price: $48.55

MTM Hydro 3/8" Premium Plated Brass Ball Valve 3,000 PSI

SKU: 20.0032


MTM Hydro 20.0032 3/8" Premium Plated Brass Ball Valve 3,000 PSI. MTM Hydro's High Pressure Plated Brass Ball valves are found in a variety of areas in the pressure washing system


Features
• Most commonly, this round-edged, light weight, heavy duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality
• When installing NPT fittings in these BSP threads, be sure to wrap threads 6-7 times with Teflon tape or 2-3 drops of Loctite


Injector Specifications:
• Max Pressure: 3,000 PSI
• Max Temperature: 176° F
• Inlet: 3/8" Female BSP
• Outlet: 3/8" Female BSP
• Body Material: Plated brass
• Weight: 1.05 lb

  Price: $32.25

MTM Hydro Extreme Cleaner PerFOAMance Wild Cherry 16oz

SKU: 44.5100


MTM Hydro 44.5100 Extreme Cleaner PerFOAMance Wild Cherry 16oz. Nothing pairs better with our foam cannons than our new wild cherry scented perFOAMance cleaner. This neutral pH balanced soap is safe on wraps as well as all paint types including: acrylic, metallic, pearlescent and matte. You’ll love the lubricity whether your washing by hand or foaming with a PF22® foam cannon

Foam Cannon Application:
• Prep MTM Hydro® pressure washing equipment. Dilute product with water using a ratio of 2 ounces of soap per 1 GPM per your pressure washer into your MTM Hydro PF22® foam cannon bottle
• Reattach the bottle to the foam cannon body. For best results shake the bottle to evenly distribute the mixture
• Raise the bar and FOAM AWAY!
• Dry your surface with our premium microfiber drying towels
• Make sure to run clean water through your foam cannon after you are done washing to rinse the filter and remove any leftover soap residue

2 or 3 Bucket Method:
• Prep MTM Hydro® buckets with Dirt Lock bucket filters
• Mix product using a ratio of 2 ounces of soap per 1 gallon in your bucket. Squirt some soap onto your premium microfiber wash pad for added lubricity and micro bubbles
• Dry your surface with our premium microfiber drying towels

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.20 lbs

  Price: $8.40

MTM Hydro High Definition Glass Cleaner 16oz

SKU: 44.5561


MTM Hydro 44.5561 High Definition Glass Cleaner 16oz. Our Hi-Def glass cleaner is designed to eliminate streaking and spotting on exterior and interior glass. It also works well on other nonporous surfaces such as most counter tops, mirrors, tubs and tile

How To:
• Apply solution to cool dry surface
• Wipe immediately with our exclusive HD glass towel or clean microfiber towel in a circular motion while the solution is still wet. DO NOT allow the product to dry on the surface of the window
Note: Test small area to ensure desired results

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.20 lbs

  Price: $8.58

MTM Hydro High Gloss Interior Shine 16oz

SKU: 44.5521


MTM Hydro 44.5521 High Gloss Interior Shine 16oz. Our interior shine spray is a high-gloss silicone water-based formula that lifts dust, dirt and debris from your vehicles’ interior surfaces and external trim pieces. Safe to use on plastic, rubber, vinyl and leather dashes or trim pieces. When you pair this with our Leather & Vinyl Cleaner they will work together to protect and enhance the vehicles appearance and help prevent cracking

How To:
• Simply apply a thin layer of interior shine onto an edgeless microfiber towel or directly onto a cool / dry surface
• Massage into surface and wipe excess spray off
• Repeat as desired
• Remove any excess spray before completion

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.30 lbs

  Price: $9.34

MTM Hydro Leather & Vinyl Interior Conditioner 16oz

SKU: 44.5501


MTM Hydro 44.5501 Leather & Vinyl Interior Conditioner 16oz. Our leather & vinyl cleaner (LVC) is a water-based silicone cream conditioner that made for leather and vinyl. It will help clean and soften and giving leather and vinyl that “new” look. It’ll leave you saying, “My leather is so soft.” Pair this with our Interior Shine spray and enjoy the decadence your vehicle has to offer

How To:
• Apply LVC to a clean dry microfiber towel or directly to leather or vinyl surface
• Gently massage product into the surface making sure to apply an even smooth coating
• Repeat as desired
• Remove any excess LVC before completion. DO NOT let the product dry before wiping off

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.20 lbs

  Price: $9.34

MTM Hydro Protective Shine Quick Detail Spray 16oz

SKU: 44.5541


MTM Hydro 44.5541 Protective Shine Quick Detail Spray 16oz. Our easy to use high gloss Quick Detail Spray creates a durable protective shine on your vehicle. Designed to provide that "just waxed" appearance in a fraction of the time. Perfect for car shows, home, and professional use. Removes hard water marks, dust, and fingerprints. Safe on chrome, aluminum, plastic, and most paint types including: acrylic, metallic, pearlescent, and matte. Simply spray the pH neutral quick detail spray onto a clean vehicle surface and wipe off to reveal a high luster

How To:
• Apply quick detail spray directly to a clean and dry surface, preferably in a shaded / covered area
• Wipe immediately in circular motions using a clean dry premium buffing microfiber towel wipe off being sure to rotate towel as necessary

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.20 lbs

  Price: $9.34

MTM Hydro Swivel O-Ring for Hose Reel

SKU: 39.0048

MTM Hydro Swivel O-Ring for Hose Reels 27.0004, 27.0005, 27.0006 & 27.0007

  Price: $0.59