MTM Hydro

MTM Hydro 20.0039 3/8" Stainless Steel Ball Valve 6,000 PSI. MTM Hydro's Stainless Steel Ball Valves are a great solution for High Pressure and Chemical environments

Features
• Stainless steel ball valves are commonly installed in in agricultural and food production environments that use corrosive cleaning agents and require equipment that will last
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• These models are typically seen at ceiling shutoff locations, at the base of the spray gun, or along wall mounted systems to open and close additional lines

Injector Specifications:
• Max Pressure: 6,000 PSI
• Max Temperature: 176° F
• Inlet: 3/8" Female
• Outlet: 3/8" Female
• Body Material: Stainless Steel
• Weight: 1.04 lb

NEW MTM Hydro 14.7022 PF22.2 Professional Foam Cannon Adjustable Air Intake and Fan with New Bottle Design Stands Up On Its Own. The MTM Hydro Foam Cannon offers not only adjustable fan blades but now offers an adjustable spray pattern (vertically or horizontally) as it throws thick foam onto your vehicle, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam

Features:
• Adjustable Spray Pattern (horizontal or vertical)
• Adjustable Fan Blades (jet-wide)
• Adjustable chemical injection knob
• Single cast plated brass body
• New stand up bottle
• Replaceable filter
• M22 and QC plug fittings included
• Approved For auto, RV, marine detailing agriculture and home cleaning

Note:
• The 1.1mm (3.0) nozzle will accommodate a variety of pressure washers typically in the lower GPM/PSI spectrum. The 1.1mm orifice will fit most residential pressure washers much more accurately than the installed 1.25mm (3.5) orifice and provide better foam from your MTM Foam Cannon
• The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit
• Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice
• For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass
• You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine
• MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice
• Additional orifice sizes and replacement items available for purchase

Specifications:
• Min. Flow Rate: 1.4 GPM
• Max. Flow Rate: 5.3 GPM
• Min. Pressure: 1,100 PSI
• Max. Pressure: 5,000 PSI
• Max. Temp.: 140°
• Nozzle Size: #3.5 / 1.25mm (Installed), #3.0 / 1.10mm included
• 32oz Grey stand up bottle
• Fitting pack (2-peices) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug
• Weight: 1.10 lbs.

Specifications
• Fits all standard 1/4" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO1V-100 PACK
• Quantity: 100

MTM Hydro 20.0033 1/2" Premium Plated Brass Ball Valve 3,000 PSI. MTM Hydro's High Pressure Plated Brass Ball valves are found in a variety of areas in the pressure washing system

Features
• Most commonly, this round-edged, light weight, heavy duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality
• When installing NPT fittings in these BSP threads, be sure to wrap threads 6-7 times with Teflon tape or 2-3 drops of Loctite

Injector Specifications:
• Max Pressure: 3,000 PSI
• Max Temperature: 176° F
• Inlet: 1/2" Female BSP
• Outlet: 1/2" Female BSP
• Body Material: Plated brass
• Weight: 1.45 lb

Specifications
• Fits all standard 3/8" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO2V-100 PACK
• Quantity: 100

MTM Hydro 20.0038 1/4" Stainless Steel Ball Valve 6,000 PSI. MTM Hydro's Stainless Steel Ball Valves are a great solution for High Pressure and Chemical environments

Features
• Stainless steel ball valves are commonly installed in in agricultural and food production environments that use corrosive cleaning agents and require equipment that will last
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• These models are typically seen at ceiling shutoff locations, at the base of the spray gun, or along wall mounted systems to open and close additional lines

Injector Specifications:
• Max Pressure: 6,000 PSI
• Max Temperature: 176° F
• Inlet: 1/4" Female
• Outlet: 1/4" Female
• Body Material: Stainless Steel
• Weight: 0.65 lb

Features:
• Combines Power and Performance with Comfort and Durability
• Unitized Valve
• Forged bronze body
• Glass-Filled nylon handle

Specifications:
• Max Pressure: 5,000 PSI
• Max Flow: 11.5 GPM
• Maximum Temperature: 300° F.
• Color: Black
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight 23 oz lbs

Features
• For use when high and low pressures are needed
• For example, spraying cleaning agents with low pressure through an injector valve and then cleaning with high pressure

Specifications
• Max Pressure: 4,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 195° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 6.1 oz.
• Note: Requires one 1/4” MPT spray nozzle and one 1/4” MPT soap nozzle, which are not included

MTM Hydro 20.0032 3/8" Premium Plated Brass Ball Valve 3,000 PSI. MTM Hydro's High Pressure Plated Brass Ball valves are found in a variety of areas in the pressure washing system

Features
• Most commonly, this round-edged, light weight, heavy duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on
• By shutting the water off, the user can then change over to another gun set up without turning the entire system off
• This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality
• When installing NPT fittings in these BSP threads, be sure to wrap threads 6-7 times with Teflon tape or 2-3 drops of Loctite

Injector Specifications:
• Max Pressure: 3,000 PSI
• Max Temperature: 176° F
• Inlet: 3/8" Female BSP
• Outlet: 3/8" Female BSP
• Body Material: Plated brass
• Weight: 1.05 lb

Specifications
• Fits all standard 1/4" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown
• Replaces QCO1V-25 Pack
• Quantity: 25

Specifications
• Fits all standard 3/8" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black QCO2B-100 PACK
• Quantity: 100

Specifications
• Fits all standard 1/4" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black
• Replaces QCO1B-100 Pack
• Quantity: 100

Specifications
• Fits all standard 3/8" quick couplers
• Material: Viton
• Max. Temperature: 300° F
• Color: Brown QCO2V-25 PACK
• Quantity: 25

Features
• Rotating nozzle adds more agitation, which increase cleaning & flushing action
• 3 Backward jets spin nozzle and drive forward
• Corrosion resistant stainless steel and brass construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel & brass
• Maximum Pressure: 4,000 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

The all new MTM Hydro 24.5004 15mm Twist Plug adapter offers you a consolidated option to adapt to proprietary M22 fittings that, previously kept you from upgrading the stock guns provided by the manufacturer

Standard pressure washers will have a 14mm stem required, however, in the image provided you can see the enlarged stem receiver. Some manufacturers have changed to 15mm to prevent you from upgrading through the use of aftermarket accessories, until now!

This premium adapter has been quality tested and certified by MTM Hydro to fit a variety of hose outlets including select popular models of Sunjoe, Ryobi, AR Blue Clean consumer units, and Greenworks so that you can, now, upgrade your guns and lance setups to MTM Hydro’s Italian SG series. Keep in mind, you could also upgrade your entire setup to Kobrajet hose with the use of the 24.5005 fitting for these same residential pressure washers

Specifications
• 3/8" QC socket
• Male M22, Yoke/Stem: 15MM
• 4,000 PSI max. pressure
• Wight: 0.25 lbs

• MTM PF22 Foamer Repair Kit – Filter, Pin & O-Rings
• Works with MTM # 14.5001

MTM Hydro 24.0101 Stainless Top Mount Pressure Gauge Quick Disconnect Fitting

MTM Hydro's Stainless Pressure Gauge Fitting with Port is meant to be paired with a 1/4” bottom-mount pressure gauge (Not included). With 3/8" Quick Couplers on both ends, this tool can quickly be relocated anywhere in your pressurized line to measure baseline and performance pressure

Specifications
• Material: Stainless steel
• Gauge Port: 1/4” Female
• Max. Pressure: 6,000 PSI
• Wight: 0.31 lbs

MTM Hydro 24” pressure washer zinc plated extension wand with 22mm-14 male twist connect inlet & 1/4” QC socket outlet

Specifications
• Length: 24"
• Pipe: 1/4” Zinc plated steel
• Inlet: 22mm-14 Male twist connect
• Outlet: 1/4" Female Quick Connect Socket
• Max Pressure: 4,100 PSI
• Max Flow: 10.5 GPM
• Max Temp: 300° F.
• Weight 1.25 lbs

Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 3/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.4 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart