P.A. Srl

#12.0 Green PA UR40 / GP YR58K Turbo Nozzle 5,800 PSI with nozzle and seat in tungsten carbide

Features
• Offers 0° Impact, but with a 25° pattern
• Reduced vibrations for greater comfort during use
• Shock absorption thanks to the rubber protection
• Nozzle and seat in tungsten carbide
• High Strength forged brass housing
• The nozzle can be started in any position thanks to the patented system with internal spring, which eliminates clearance between the seat and the nozzle

Specifications
• Nozzle Size #12.0
• Max PSI: 5,800
• Min Operating PSI: 2,600
• Max Temp.: 140° F
• Min Temp.: 41° F
• Inlet: 1/4" BSP-F
• Weight: 15.6 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

PA RL124 Heavy Duty High Volume Spray Gun 1,950 PSI 32 GPM

Features
• Covered by shockproof plastic semi-housings
• Seat and ball in Sst
• Entirely built of Sst and body in brass
• Ergonomic construction
• Minimum fatigue for trigger opening
• Minimum load loss (see chart)
• No fluid passage upon trigger release

Specifications
• Rated Pressure: 1,750 PSI
• Permissible Pressure: 1,950 PSI
• Max Flow: 32.0 GPM
• Rated Temp: 210° F.
• Inlet: 1/2" Female
• Outlet: 1/2" Female
• General Part #: YG1732
• Weight: 45.15 oz

Matching High Pressure Stainless Steel Lance & Holder for RL 84 & RL 204 Trigger Guns. Complete with adjustable handle

Specifications
• Length: 31.5”
• Permissible Pressure: 8,100 PSI
• Rated Pressure: 7,250 PSI
• Rated Flow Rate: 53.0 GPM
• Rated Temperature: 109° F
• Inlet: 1/2" Male
• Outlet: 1/4" Female NPT(nozzle holder)
• General Pump # Y30500080, Lance for YG7221/L31
• Weight: 52.5 oz

General YG4032S / PA 30.0680.50 High Flow 32 GPM Straight, Rear Entry Spray Gun for Hydro Excavation.

Features:
• Shockproof plastic housing
• Unique design compensates for changes in pressure
• Internal construction of brass and Stainless Steel
• Ergonomic design
• Minimizes fatigue for the operator

Specifications:
• Max Volume: 32 GPM
• Rated Discharge Pressure: 4,050 PSI
• Max Discharge Pressure: 4,500 PSI
• Max Temp: 210° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• Materials: Stainless Steel, Brass, Plastic, Viton
• Weight: 2.8 lbs

PA VB350 / PA YU5075KMS pressure regulating unloader valve with micro switch. Pressure regulating valve connected to an electric switch, electro-mechanic type, which when reaching a preset calibrated pressure, opens or closes an electric contact. At gun shut off, the water flow is bypassed at reduced pressure

Features:
• Sturdy construction in steel and brass
• Electrical insulation: class IP55
• Electric drive shunted from valve functions with two positions 1) Unloader working in pressure 2) Unloader with all the flow in bypass
• Mechanical control of the electric switch for a simple and reliable function
• Hexagonal shaped check valve to avoid jamming
• Rotating by-pass manifold G3/8 F
• Adjustable pressure
• Forged brass body .

Technical Manual

Specifications:
• Rated Pressure: 5,100 PSI
• Permissible Pressure: 5,600 PSI
• Rated Flow Rate: 10.5 GPM
• Rated Temperature: 195° F
• Max rated voltage: 250 V
• Breaking switch: 6 (A) resistive load - 6 (A) inductive load
• Cable length : 1200 mm electric wire : 3 x 1mm2
• Cable max ampere: 10 A
• Environment temperature: 75 °C Type of action: 1C
• Electrical component lifr: 50.000 commutationsi,T.85°C,a 250V in line with CEE 24- VDE 0630
• Inlet Port: 3/8" Bsp M
• Outlet Port: 3/8” Bsp F
• Bypass Port: 3/8” Bsp F
• Gauge Port: 1/4” Bsp F
• Weight: 42.75 oz

PA RL 57 / GP YG7207 Easy Pull Spray Gun 8,000 PSI 7.5 GPM. No fluid passage upon trigger release. New mechanical device with double connecting rods to guarantee less strain when opening and holding

Features
• Covered by shockproof plastic semi-housings
• Seat in Sst and ball in Widia
• Totally built in stainless steel AISI 303
• Ergonomic construction
• Minimum fatigue for trigger opening and use
• New mechanical opening device with double connecting rods
• New trigger design, rotating on a fixed pin to guarantee better mobility and steadiness

Specifications
• Rated Pressure: 7,250 PSI
• Permissible Pressure: 8,000 PSI
• Max Flow: 7.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Use # 2100378 matching 36” lance
• Replaces 30.4700.00
• Weight: 25.18 oz

#6.0 PA UR60 / GP YR87K Repair Kit

GP # Y25145624

PA RL 84 Heavy Duty, High Pressure Spray Gun 8,100 PSI 21 GPM. Ergonomic construction with minimum fatigue for trigger opening and reduced pressure loss

Features
• Covered by shockproof plastic semi-housings
• Sturdy construction of Sst & brass with dynamic teflon seals
• Assembly on hoses equipped with G 1/2” fittings
• Entirely built of Sst & body in brass
• Ergonomic construction
• Minimum fatigue for trigger opening
• Minimum load loss (see chart)

Specifications
• Rated Pressure: 7,250 PSI
• Permissible Pressure: 8,100 PSI
• Max Flow: 21.0 GPM
• Max Temp: 210° F.
• Inlet: 1/2" BSP-F
• Outlet: 1/2" BSP-F
• General Pump # YG7221
• Weight: 49.17 oz

PA RB 65 Blue 316 Stainless Steel Adjustable Spray Wash Down Gun with Inlet Swivel for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical jet suitable for corrosive liquids

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in Sst Aisi 316
• Ergonomic construction
• Inlet swivel connection

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Internal Material: Stainless steel Aisi 316
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1635SS
• Weight: 35.88 oz

Matching High Pressure Stainless Steel Lance & Holder for RL 84 & RL 204 Trigger Guns. Complete with adjustable handle

Specifications
• Length: 50”
• Permissible Pressure: 8,100 PSI
• Rated Pressure: 7,250 PSI
• Rated Flow Rate: 53.0 GPM
• Rated Temperature: 109° F
• Inlet: 1/2" Male
• Outlet: 1/4" Female NPT(nozzle holder)
• General Pump # Y30500092, Lance for YG7221/L51
• Weight: 76.4 oz

PA RL 204 Large Flow Spray Gun 3,200 PSI 53 GPM. No fluid passage upon trigger release. Ergonomic construction, with minimum fatigue for trigger opening

Features
• Covered by shockproof plastic semi-housings
• Sturdy construction of Sst & brass with dynamic teflon seals
• Seat and shutter pin in Sst
• Gun with minimum load loss, see pressure drop chart
• Assembly on hoses equipped with G 3/4 fittings
• Entirely built of Sst & body in brass
• Ergonomic construction
• Minimum fatigue for trigger opening

Specifications
• Rated Pressure: 2,900 PSI
• Permissible Pressure: 3,200 PSI
• Max Flow: 53.0 GPM
• Max Temp: 210° F.
• Inlet: 3/4" BSP-F
• Outlet: 1/2" BSP-F
• Weight: 46.94 oz

PA VS 500 Safety & Pressure Regulating Valve 8,100 PSI. With rated pressures up to 7,250 PSI and flows up to 21.0 GPM

Features:
• Compensated pressure regulating valve
• Regulates the bypass of the fluid with a minimum variation of the pressure
• Suitable to be utilized as a safety valve
• Central body and fittings in brass
• Internal components in Sst
• Moving parts totally protected

AS SAFETY VALVE ONLY FOR PRESSURE WASHERS:
• Secure intervention discharging all the flow
• Prompt and effective damping action against pressure spikes

AS A PRESSURE REGULATING VALVE:
• High balancing to guarantee slight variations of the rated pressure when the flow varies in bypass

Specifications:
• Rated Pressure: 7,250 PSI
• Permissible Pressure: 8,100 PSI
• Rated Temperature: 195° F
• Rated Flow Rate: 21.0 GPM
• Material: Brass and Sst
• Inlet Port: 1/2" F
• Bypass Port: 3/8" F
• AR40399
• Weight: 51.53 Oz

PA VB 200/150 Pressure Regulating Unloader Valve 53 GPM 2,450 PSI. At gun shut off, the water flow is bypassed at reduced pressure

Features:
• Sturdy steel and brass construction
• Hexagonal shaped check valve to avoid jamming
• Max pressure adjustment by screw and locknut

Specifications:
• Rated Pressure: 2,200 PSI
• Permissible Pressure: 2,450 PSI
• Rated Flow Rate: 53 GPM
• Rated Temperature: 195° F
• Inlet Port: 1” FPT
• Outlet Port: 1” FPT
• Bypass Port: 1” FPT
• Weight: 72.16 oz

PA VB 80/400 Stainless Steel Unloader Valve 6,500 PSI. Pressure regulating valve equipped with double connection for inlet port. At gun shut off, the water flow is bypassed at reduced pressure

Featuring:
• Sturdy construction in Sst Aisi 303
• Return action of the piston by means of a powerful spring, for confident working and a reliable pressure adjustment
• Multiple connections for easy installation
• Hexagonal shaped check valve to avoid jamming

Specifications:
• Spring Color: Black
• Permissible Pressure: 6,500 PSI
• Rated Pressure: 5,800 PSI
• Rated Flow Rate: 21.0 GPM
• Material: Stainless Steel 303
• Rated Temperature: 195° F
• Inlet Ports (2): 1/2" F NPT
• Outlet Port: 1/2” F NPT
• Bypass Port: 1/2” F NPT
• AKA: AR # AR51248, GP # YU2158
• Weight: 47.0 Oz

#3.0 PA UR60 / GP YR87K Industrial Duty Rotating Nozzle. This Sst. rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI.

Features
• Offers 0° Impact, but with a 20° pattern
• Heavy-duty, rotating nozzle
• Ideal for blasting applications

Specifications
• Nozzle Size #3.0
• Max PSI: 8,700
• Min PSI: 2,600
• Max Flow Rate: 11.8 GPM
• Min Flow Rate: 1.6 GPM
• Max Temp.: 195° F
• Min Temp.: 41° F
• Inlet Port: 1/4” BSP-F
• Dimensions: 1.65” x 3.82”
• Materials: Stainless Steel, Seat and nozzle in tungsten carbide
• Weight: 19 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

#2.0 PA UR60 / GP YR87K Industrial Duty Rotating Nozzle. This Sst. rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI.

Features
• Offers 0° Impact, but with a 20° pattern
• Heavy-duty, rotating nozzle
• Ideal for blasting applications

Specifications
• Nozzle Size #2.0
• Max PSI: 8,700
• Min PSI: 2,600
• Max Flow Rate: 11.8 GPM
• Min Flow Rate: 1.6 GPM
• Max Temp.: 195° F
• Min Temp.: 41° F
• Inlet Port: 1/4” BSP-F
• Dimensions: 1.65” x 3.82”
• Materials: Stainless Steel, Seat and nozzle in tungsten carbide
• Weight: 19 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

#4.0 PA UR60 / GP YR87K Industrial Duty Rotating Nozzle. This Sst. rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI.

Features
• Offers 0° Impact, but with a 20° pattern
• Heavy-duty, rotating nozzle
• Ideal for blasting applications

Specifications
• Nozzle Size #4.0
• Max PSI: 8,700
• Min PSI: 2,600
• Max Flow Rate: 11.8 GPM
• Min Flow Rate: 1.6 GPM
• Max Temp.: 195° F
• Min Temp.: 41° F
• Inlet Port: 1/4” BSP-F
• Dimensions: 1.65” x 3.82”
• Materials: Stainless Steel, Seat and nozzle in tungsten carbide
• Weight: 19 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

#5.0 PA UR60 / GP YR87K Industrial Duty Rotating Nozzle. This Sst. rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI.

Features
• Offers 0° Impact, but with a 20° pattern
• Heavy-duty, rotating nozzle
• Ideal for blasting applications

Specifications
• Nozzle Size #5.0
• Max PSI: 8,700
• Min PSI: 2,600
• Max Flow Rate: 11.8 GPM
• Min Flow Rate: 1.6 GPM
• Max Temp.: 195° F
• Min Temp.: 41° F
• Inlet Port: 1/4” BSP-F
• Dimensions: 1.65” x 3.82”
• Materials: Stainless Steel, Seat and nozzle in tungsten carbide
• Weight: 19 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

#6.0 PA UR60 / GP YR87K Industrial Duty Rotating Nozzle. This Sst. rotating nozzle with Tungsten Carbide Nozzle & Seat is rated up to 8,700 PSI.

Features
• Offers 0° Impact, but with a 20° pattern
• Heavy-duty, rotating nozzle
• Ideal for blasting applications

Specifications
• Nozzle Size #6.0
• Max PSI: 8,700
• Min PSI: 2,600
• Max Flow Rate: 11.8 GPM
• Min Flow Rate: 1.6 GPM
• Max Temp.: 195° F
• Min Temp.: 41° F
• Inlet Port: 1/4” BSP-F
• Dimensions: 1.65” x 3.82”
• Materials: Stainless Steel, Seat and nozzle in tungsten carbide
• Weight: 19 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart