P.A. Srl

Turbine, PA UR25 & UR32
PA # 25.1631.22

Matching High Pressure Stainless Steel Lance & Holder for RL 84 & RL 204 Trigger Guns. Complete with adjustable handle

Specifications
• Length: 50”
• Permissible Pressure: 8,100 PSI
• Rated Pressure: 7,250 PSI
• Rated Flow Rate: 53.0 GPM
• Rated Temperature: 109° F
• Inlet: 1/2" Male
• Outlet: 1/4" Female NPT(nozzle holder)
• General Pump # Y30500092, Lance for YG7221/L51
• Weight: 76.4 oz

Matching High Pressure Stainless Steel Lance & Holder for RL 84 & RL 204 Trigger Guns. Complete with adjustable handle

Specifications
• Length: 31.5”
• Permissible Pressure: 8,100 PSI
• Rated Pressure: 7,250 PSI
• Rated Flow Rate: 53.0 GPM
• Rated Temperature: 109° F
• Inlet: 1/2" Male
• Outlet: 1/4" Female NPT(nozzle holder)
• General Pump # Y30500080, Lance for YG7221/L31
• Weight: 52.5 oz

PA RL124 Heavy Duty High Volume Spray Gun 1,950 PSI 32 GPM

Features
• Covered by shockproof plastic semi-housings
• Seat and ball in Sst
• Entirely built of Sst and body in brass
• Ergonomic construction
• Minimum fatigue for trigger opening
• Minimum load loss (see chart)
• No fluid passage upon trigger release

Specifications
• Rated Pressure: 1,750 PSI
• Permissible Pressure: 1,950 PSI
• Max Flow: 32.0 GPM
• Rated Temp: 210° F.
• Inlet: 1/2" Female
• Outlet: 1/2" Female
• General Part #: YG1732
• Weight: 45.15 oz

Repair Kit, YG7207, RL57
PA # 30.4713.24

Repair Kit, YG2953, RL19, RL204
PA # 30.4046.24

Repair Kit VB 80/400, GP # YU2158 PA # 60.0451.24

Repair Kit PA/GP YVB7/75 pcs.9x1

GP # YKITVB7 & Y60071924

Repair Kit PA VB200/150 & GP YU5221, 10x1pcs.

GP # YKITU5221

Repair Kit PA VB 85/160, 85/180, 85/280, 85/310 & GP YUW21235, YUB21405

60.0498.24, YUKIT215

PA Pulsar 4 Unloader Plumbing Kit for Pressure Washer Pump with Safety Relief and EZ Start– 4,050 PSI Max. This unloader kit has all the components to make installation easy

Specifications:
• Works with pumps that have 1/2” FPT inlet and 3/8” FPT Outlet
• Safety relief vale protects equipment and people with adjustable “Pop Off” protection
• Built-In easy start valve relieves back pressure during engine start up
• Maximum Pressure: 4,050 PSI
• Max. Volume: 10.5 GPM

COMPONENT:
• PA Pulsar 4 Adjustable Unloader Valve 4,050 PSI with EZ Start
• GP Safety pressure relief valve with adjustable range: 1,000 - 6,000 PSI
• 3/8” Steel street elbow
• 24” of push-on bypass hose
• 1/4” Male push on fitting
• 3/8” Male push-on fitting
• 3/8M x 3/8M Hex Nipple Steel
• GP Thermal relief valve protects pump from overheating
• GP Duraview water inlet filter with garden hose connection
• 3/8” QC socket
• 3/8” QC plug
• Roll of Teflon tape
• Note: Pump in 2nd picture is not included and kit may look different than shown in picture
• Unloader Must Be Installed Vertically For Proper Operation
• Weight: 5 lb

PA Pulsar 4 Unloader Plumbing Kit for Pressure Washer Pump with EZ Start– 4,050 PSI Max. This unloader kit has all the components to make installation easy

Specifications:
• Works with pumps that have 1/2” FPT inlet and 3/8” FPT Outlet
• Built-In easy start valve relieves back pressure during engine start up
• Maximum Pressure: 4,050 PSI
• Max. Volume: 10.5 GPM

COMPONENT:
• PA Pulsar 4 Adjustable Unloader Valve 4,050 PSI with EZ Start
• 24” of push-on bypass hose
• 1/4” Male push on fitting
• 3/8” Male push-on fitting
• 3/8M x 3/8M Hex Nipple Steel
• GP Thermal relief valve protects pump from overheating
• GP Duraview water inlet filter with garden hose connection
• 3/8” QC socket
• 3/8” QC plug
• Roll of Teflon tape
• Note: Pump in 2nd picture is not included and kit may look different than shown in picture
• Unloader Must Be Installed Vertically For Proper Operation
• Weight: 5 lb

Piston Rod VB 80/400, YU2158
PA # 60.0432.51

Pin 3x18, SS VB 80/400, YU2158
PA # 15.1032.00