PROPULSE, A Schieffer Co.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Arm-A-Flex™ hoses have a polyethylene (UHMWPE) coating which provides durability and non-marking properties
• This is the Ultimate hose for In Plant/Food Processing or other Heavy-Duty use areas
• This hose will not leave black marks or scuff marks when dragged across surfaces
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Burst (Minimum): 4:1 working pressure

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 50’
• Working (Maximum): Up to 4,785 PSI
• Burst (Minimum): 19,140 PSI
• Color: Black
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty red bend restrictors on both ends
• Weight 14.2 lbs

Propulse Carpet Clean 3,000 PSI 1/4" x 100' Blue Smooth “Mark-Less” Rubber Hose. Carpet cleaners’ preferred choice for hot water solution hoses. Smooth blue and less marking cover with a seamless heat and chemical resistant tube ideal for the commercial carpet cleaning professional.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for commercial carpet cleaning applications
• Rubber construction throughout
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Smooth, “Mark-Less” with printed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 1/4" ID
• Length: 100’
• Working (Maximum): Up to 3,000 PSI
• Burst (Minimum): 9,000 PSI
• Color: Blue
• Maximum Temperature: 250° F.
• Ends: 1/4" MPT (solid) )
• Heavy duty black bend restrictors on both ends.
• Weight 12.85 lbs

Propulse Commercial Clean 4,000 PSI 3/8" x 100' Grey Rubber “Mark-Less” Hose with Quick-Connect Couplers. Rubber construction throughout, with a single layer of steel wire braid, the hose of choice for manufacturers of commercial duty pressure washers

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover Wrapped finish, “Mark-Less” with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 100’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Grey
• Maximum Temperature: 250° F.
• Ends: 3/8" Quick Connect couplers ( 1 steel plug & 1 brass socket)
• Permanent heavy duty black bend restrictors on both ends
• Weight 18.3 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Smooth, “Mark-Less” with printed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 100’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Blue
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel) )
• Permanent heavy duty black bend restrictors on both ends.
• Weight 23.9 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Wrapped finish, “Mark-Less” with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 100’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Yellow
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty black bend restrictors on both ends
• Weight 19.2 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 1/4” ID
• Length: 200’
• Working (Maximum) Pressure: 4,400 PSI
• Burst (Minimum): 11,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 1/4” MPT (Swivel)
• Outlet: 1/4” MPT (Solid)
• Weight 12.6 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 1/8” ID
• Length: 200’
• Working (Maximum) Pressure: 4,800 PSI
• Burst (Minimum): 12,000 PSI
• Optimal Recommended Flow Rate: Up to 1.5 GPM
• Max. Fluid Temperature: 160º F.
• Inlet: 1/8” MPT with 1/4” MPT Bushing (Solid)
• Outlet: 1/8” MPT (Solid)
• Weight 5.55 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Wrapped finish, “Mark-Less” with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 100’
• Working (Maximum): Up to 4,000 PSI
• Burst (Minimum): 12,000 PSI
• Color: Blue
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty black bend restrictors on both ends
• Weight 19.2 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 3/8” ID
• Length: 100’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Weight 11.9 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for hot water commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 100’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Black
• Maximum Temperature: 250° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty red bend restrictors on both ends
• Weight 31.0 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for hot water commercial pressure cleaning applications
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Cover: Wrapped finish, “Mark-Less” with embossed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 100’
• Working (Maximum): Up to 6,000 PSI
• Burst (Minimum): 18,000 PSI
• Color: Grey
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty red bend restrictors on both ends
• Weight 31.0 lbs

Propulse Carpet Clean 3,000 PSI 1/4" x 150' Blue Smooth “Mark-Less” Rubber Hose. Carpet cleaners’ preferred choice for hot water solution hoses. Smooth blue and less marking cover with a seamless heat and chemical resistant tube ideal for the commercial carpet cleaning professional.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for commercial carpet cleaning applications
• Rubber construction throughout
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Smooth, “Mark-Less” with printed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 1/4" ID
• Length: 150’
• Working (Maximum): Up to 3,000 PSI
• Burst (Minimum): 9,000 PSI
• Color: Blue
• Maximum Temperature: 250° F.
• Ends: 1/4" MPT (solid) )
• Heavy duty black bend restrictors on both ends.
• Weight 19.15 lbs

Propulse 1/2” Jetter Clean Mainline commercial and municipal cleaning hoses with operating pressures of 4,000 PSI designed for truck or trailer mount sewer jetter applications

Features:
• Suitable replacements for factory installed sewer jetter cleaning hoses
• Reinforcement: Two layers of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Glossy green abrasion resistant cover

Specifications:
• Inner Diameter: 1/2” ID
• Length: 100’
• Maximum Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Temperature: 160º F.
• Inlet: 1/2" MPT(swivel)
• Outlet: 1/2” MPT(solid)
• Replaces # 686200094
• Weight 19.0 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 3/8” ID
• Length: 150’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Weight 17.9 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 1/4” ID
• Length: 300’
• Working (Maximum) Pressure: 4,400 PSI
• Burst (Minimum): 11,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 1/4” MPT (Swivel)
• Outlet: 1/4” MPT (Solid)
• Packaging: Wound on plastic reel
• Weight 22.10 lbs

Propulse Carpet Clean 3,000 PSI 1/4" x 200' Blue Smooth “Mark-Less” Rubber Hose. Carpet cleaners’ preferred choice for hot water solution hoses. Smooth blue and less marking cover with a seamless heat and chemical resistant tube ideal for the commercial carpet cleaning professional.

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Suitable for commercial carpet cleaning applications
• Rubber construction throughout
• Reinforcement: One layer of high tensile braided steel – R1 Rating
• Cover: Smooth, “Mark-Less” with printed lay line
• Burst (Minimum): 3:1 working pressure
• Impulse Life: 200,000+

Specifications:
• Hose Inner Diameter: 1/4" ID
• Length: 200’
• Working (Maximum): Up to 3,000 PSI
• Burst (Minimum): 9,000 PSI
• Color: Blue
• Maximum Temperature: 250° F.
• Ends: 1/4" MPT (solid) )
• Heavy duty black bend restrictors on both ends.
• Weight 25.05 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

Features:
• Assembled in USA with high quality components
• Arm-A-Flex™ hoses have a polyethylene (UHMWPE) coating which provides durability and non-marking properties
• This is the Ultimate hose for In Plant/Food Processing or other Heavy-Duty use areas
• This hose will not leave black marks or scuff marks when dragged across surfaces
• Rubber construction throughout
• Reinforcement: Two layers of high tensile braided steel – R2 Rating
• Burst (Minimum): 4:1 working pressure

Specifications:
• Hose Inner Diameter: 3/8" ID
• Length: 100’
• Working (Maximum): Up to 4,785 PSI
• Burst (Minimum): 19,140 PSI
• Color: Black
• Maximum Temperature: 212° F.
• Ends: 3/8" MPT (1 solid & 1 swivel)
• Permanent heavy duty red bend restrictors on both ends
• Weight 27.2 lbs

ProPulse® UBERFLEX™ 4,000 PSI 3/8" x 200' Blue Non-Marking Pressure Washer Hose. The most flexible & light weight in the industry! The latest technology from ProPulse® delivers a revolutionary upgrade from the standard commercial cold water pressure washer hose. UBERFLEX™ possesses the unique properties of superior resilience to permanent kinking and stability in length. It is also unmatched in abrasion, chemical, ozone and UV resistance. The UBERFLEX™ weighs over 10% less than the standard 1-wire rubber hose and the textured polyurethane cover offers reduced snagging and drag resistance - reducing user fatigue. UBERFLEX™ hoses are preferred by pressure washer manufacturers on their middle and high-end commercial cold-water equipment NOT FOR HOT WATER OR STEAM

UBERFLEX™ Hose on YouTube

Features:
• MADE IN THE USA: Every foot of ProPulse® UBERFLEX™ is designed, engineered and manufactured in the USA, assembled using imported and/or domestic end fittings
• PERMANENT KINK RESISTANCE: Let’s face it—all hoses can be kinked under the right conditions, but the unique UberFlex technology ensures that if the hose is pinched or kinked, it won’t stay that way permanently
• FLEXIBILITY: UberFlex feels more like an extension cord than a hose, and possesses the smallest bend radius in its class
• TRUE NON-MARKING: Adds to the overall ease of handling.
• TEXTURED COVER: The textured cover upgrade reduces tack and snag tendencies during handling, dragging and reeling
• UNMATCHED ABRASION, OZONE, UV AND CHEMICAL RESISTANCE: The proprietary high performance of the UberFlex cover is at least five times more abrasion resistant than traditional PVC covered hose

Hose Construction
• Inner Tube: Proprietary water and chemical resistant rubberized thermoplastic blend
• Reinforcement: Dual-ply high tenacity polyester with ProPulse® exclusive length stabilizing technology
• Cover: Abrasion resistant polyurethane, ProPulse exclusive low tack, low friction finish

Specifications:
• Hose: 3/8” ID x 200’ Long
• Working Pressure: 4,000 PSI
• Color: Blue
• Max. Water Temperature: 140° F.
• Ends: 3/8" Male NPT (1 solid & 1 swivel)
• Black bend restrictors on both ends
• Weight 31.70 lbs

ProPulse, a Schieffer Company, backed by more than 90 years of innovation

MADE IN USA
Every foot of Propulse Jetter Clean is manufactured at our ISO9001:2008 certified factory in the USA using 100% domestically sourced materials

Features:
• Suitable for consumer and commercial applications
• Reinforcement: One layer of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Easily slides into sewer lines and pipes
• Glossy black abrasion resistant cover

Specifications:
• Inner Diameter: 3/8” ID
• Length: 200’
• Working (Maximum) Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Fluid Temperature: 160º F.
• Inlet: 3/8” MPT (Swivel)
• Outlet: 3/8” MPT (Solid)
• Packaging: Wound on plastic reel
• Weight 27.8 lbs

Propulse 1/2” Jetter Clean Mainline commercial and municipal cleaning hoses with operating pressures of 4,000 PSI designed for truck or trailer mount sewer jetter applications

Features:
• Suitable replacements for factory installed sewer jetter cleaning hoses
• Reinforcement: Two layers of polyester braid
• Cover: Thermoplastic smooth finish with printed lay line
• Burst (Minimum): 2.5:1 working pressure
• Glossy green abrasion resistant cover

Specifications:
• Inner Diameter: 1/2” ID
• Length: 200’
• Maximum Pressure: 4,000 PSI
• Burst (Minimum): 10,000 PSI
• Max. Temperature: 160º F.
• Inlet: 1/2" MPT(swivel)
• Outlet: 1/2” MPT(solid)
• Packaging: Wound on plastic reel
• Replaces # 686200062
• Weight 40.3 lbs