Suttner America

Suttner ST-2320 Trigger Gun 2,170 PSI 21 GPM 1/2" SS Swivel Inlet 1/2" SS Outlet. The sturdy low- and medium-pressure gun made of plastics intended to come into contact with food and fitted with a high-quality brass/stainless steel valve

Features
• The rounded design of gun and handle prevent quick soiling and facilitate maintenance
• Comfortable ergonomic hand grip design
• Easy-Pull is designed for operators and applications with high-volume of trigger cycling
• The ST-2320 guns can be used everywhere: Industry, automotive, street cleaning, and towns
• Made of plastics intended to come into contact with food according to the Directive 1935/2004/EC
• Especially suitable for the food industry
• Ideal for soft wash systems
• Valve piston made of stainless steel
• High-quality design with EPDM seal and PEEK valve piston

ST-2320 Data Sheet

Specifications
• Inlet (Stainless Steel): 1/2” FPT Swiveling by 360°
• Outlet (Stainless Steel): 1/2” FPT
• Maximum Pressure: 2,170 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 300º F.
• Optional: Adjustable nozzle ST-51.1 # 200051750
• Weight: 1.75 lb

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 10.0 (Grey)
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 4.5
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 5.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 5.5
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 6.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 7.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 8.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 9.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.48 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner Single Turbo Nozzle Driver. With 1/4"F Inlet & 1/4"M Outlet and rated to 5,800 PSI

Features:
• High Quality, German engineered components
• Designed for connecting the ST-357 rotating nozzle to a sewer cleaning hose
• Hardened stainless steel body with extra sharp edges

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,800 PSI
• Inlet: 1/4” Female
• Outlet: 1/4” Male
• Max Flow: 16.0 GPM
• Outside Diameter (O.D.): 2.063”
• Note: Requires ST-357 1/4” turbo nozzle (Not Included)
• Weight: 0.45 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-161 Stainless Steel Metering Valve, 212° F .35" Hose Barb. Eliminate the need for dosing nozzles

Specifications
• Fits Injectors ST-160, ST-160.2, ST-167, ST-168
• Adjustable
• Stainless steel
• Food grade construction
• Weight: 1.75 lb

Suttner ST-2305 Easy-Pull Spray Gun 5,000 PSI with KEW Coupler. Ideal for quick connecting different lances and accessories. Comfort technology designed "easy pull trigger" and comfort grip provide ease when working long hours

Features
• Swivel inlet for hose positioning
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength
• The Easy-Pull trigger is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull trigger, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight: 1.73 lb

Features:
• Pedal and valve are in protective housing
• Inlet and outlet are positioned to help keep hose out of the way
• Heavy gauge steel construction for durability and stability
• Can be used in other applications

Specifications:
• Inlet: 3/8” FPT
• Outlet: 1/4” FPT
• Maximum Pressure: 3,000 PSI
• Max. Flow Rate: 8.0 GPM
• Max. Temp.: 320º F.
• Weight: 7 lbs.

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Normally closed bypass
• Amps: 125 VAC 5A, 240 VAC 3A
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.86 lbs

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless steel components
• 303 Stainless Steel Housing
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Food Grade

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.24 lb

Suttner ST-75S Stainless Steel Food Grade Head 4,000 PSI with #8.0 Air Injector Nozzle and 1/4" F Inlet. The ST-75 produces thick foam for an easy and safe application and to save on chemical usage by reducing splash and drift of chemicals

Features
• By means of the foam head ST-75S different foam applications are possible as the air injector nozzle is easily exchangeable and adaptable
• The flat spray nozzle can be infinitely adapted from the vertical position to the horizontal one
• The maximum flow is dependent on the chosen nozzle size
• By means of the integrated air injector in the foam head the air is sucked in on the face side
• Independent of the length of the lance a constant foam quality is guaranteed
• The spraying result is especially even as a high quality foam nozzle insert is used
• With stainless steel "wool" like foam pad
• Food grade

ST-75S Foam Nozzle on YouTube

ST-75 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzle Size: 8.0
• Max Pressure: 4,000 PSI
• Flow Rate: 1 - 6 GPM
• Max Temp: 212° F.
• Inlet: 1/4" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 0.31 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-75S Stainless Steel Food Grade Head 4,000 PSI with #10.0 Air Injector Nozzle and 1/4" F Inlet. The ST-75 produces thick foam for an easy and safe application and to save on chemical usage by reducing splash and drift of chemicals

Features
• By means of the foam head ST-75S different foam applications are possible as the air injector nozzle is easily exchangeable and adaptable
• The flat spray nozzle can be infinitely adapted from the vertical position to the horizontal one
• The maximum flow is dependent on the chosen nozzle size
• By means of the integrated air injector in the foam head the air is sucked in on the face side
• Independent of the length of the lance a constant foam quality is guaranteed
• The spraying result is especially even as a high quality foam nozzle insert is used
• With stainless steel "wool" like foam pad
• Food grade

ST-75S Foam Nozzle on YouTube

ST-75 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzle Size: 10.0
• Max Pressure: 4,000 PSI
• Flow Rate: 1 - 6 GPM
• Max Temp: 212° F.
• Inlet: 1/4" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 0.31 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-75S Stainless Steel Food Grade Head 4,000 PSI with #5.0 Air Injector Nozzle and 1/4" F Inlet. The ST-75 produces thick foam for an easy and safe application and to save on chemical usage by reducing splash and drift of chemicals

Features
• By means of the foam head ST-75S different foam applications are possible as the air injector nozzle is easily exchangeable and adaptable
• The flat spray nozzle can be infinitely adapted from the vertical position to the horizontal one
• The maximum flow is dependent on the chosen nozzle size
• By means of the integrated air injector in the foam head the air is sucked in on the face side
• Independent of the length of the lance a constant foam quality is guaranteed
• The spraying result is especially even as a high quality foam nozzle insert is used
• With stainless steel "wool" like foam pad
• Food grade

ST-75S Foam Nozzle on YouTube

ST-75 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzle Size: 5.0
• Max Pressure: 4,000 PSI
• Flow Rate: 1 - 6 GPM
• Max Temp: 212° F.
• Inlet: 1/4" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 0.31 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart

Suttner ST-75S Stainless Steel Food Grade Head 4,000 PSI with #13.0 Air Injector Nozzle and 1/4" F Inlet. The ST-75 produces thick foam for an easy and safe application and to save on chemical usage by reducing splash and drift of chemicals

Features
• By means of the foam head ST-75S different foam applications are possible as the air injector nozzle is easily exchangeable and adaptable
• The flat spray nozzle can be infinitely adapted from the vertical position to the horizontal one
• The maximum flow is dependent on the chosen nozzle size
• By means of the integrated air injector in the foam head the air is sucked in on the face side
• Independent of the length of the lance a constant foam quality is guaranteed
• The spraying result is especially even as a high quality foam nozzle insert is used
• With stainless steel "wool" like foam pad
• Food grade

ST-75S Foam Nozzle on YouTube

ST-75 with ST-160 Chemical Injector on YouTube

Specifications
• Air Injector Nozzle Size: 13.0
• Max Pressure: 4,000 PSI
• Flow Rate: 1 - 6 GPM
• Max Temp: 212° F.
• Inlet: 1/4" Female
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 0.31 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Nozzle Chart to determine correct Foam Nozzle to use

Foam Nozzle Chart