Suttner America

1/2” Suttner # 25.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 25.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.58”
• Length: 2.17”
• Weight: 9.91 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner # 8.0 Warhead / Egg Sewer Cleaning Nozzle. With 1 Front, 6 Rear jets and rated to 7,250 PSI. These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet.

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• Hardened stainless steel body and threaded inserts can easily be serviced/replaced for longer life span

Specifications:
• Nozzle Size: # 8.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.58”
• Length: 2.17”
• Weight: 9.91 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• High Quality, German engineered components
• Vented grip can be pushed and pulled to make lance angle from 20° to 90°
• Each desired angle remains stationary until adjusted
• Cleans hard to reach areas easier saving time and money

See ST-85 in action on YouTube

Specifications
• Max Pressure: 3,050 PSI
• Length: 33”
• Max Temp: 300° F.
• Inlet: 1/4" Female NPT
• Outlets: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 2.42 lb

Suttner ST-358 Sewer Jetting Turbo Nozzle 6.0, 5070 PSI, 1 Front Jet & 6 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 6
• Nozzle Size: # 6.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-358 Sewer Jetting Turbo Nozzle 5.0, 5070 PSI, 1 Front Jet & 5 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PS
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 5
• Nozzle Size: # 5.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-358 Sewer Jetting Turbo Nozzle 8.0, 5070 PSI, 1 Front Jet & 8 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 8
• Nozzle Size: # 8.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner 38” ST-54.2 Stainless Steel Dual Lance 5,800 PSI With Brass Soap Nozzle and Nozzle Protectors. For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve (chemical injector required) and then cleaning with high pressure

Features
• The serious high pressure spray contractors choice
• High Quality, German engineered components
• Stainless steel construction
• Features our comfortable ergonomic shaped cool & compact molded grip resistant to heat
• Suitable for corrosive chemicals
• Ergonomic side handle for easy Hi/Low pressure adjustment
• Premium dual-purpose lance that adds extreme versatility to your cleaning tools and accessories
• Lance is equipped with 65° x #30 low pressure brass soap nozzle
• Nozzle protectors included
• Optional stainless steel soap nozzle available

Specifications
• Max Pressure: 5,800 PSI
• Length: 38.5”
• Max Temp: 302° F.
• Lance & Valve Material: Stainless steel
• Inlet: 1/4" Male NPT
• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle
• Note: 1/4” MPT Nozzle not included
• Weight: 3.20 lb

1/2” Suttner #10.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #12.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #20.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 20.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #31.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 31.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #10.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 10.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #12.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 12.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #15.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 15.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #20.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 20.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #25.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 25.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner #31.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer

Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations

Specifications:
• Nozzle Size: # 31.0
• Material: Stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.23”
• Weight: 5.7 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless Steel Housing
• Ceramic ball together with a seal kit made out of stainless steel
• Food Grade

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.25 lb

Suttner ST-265 Pressure Compensating Unloader Valve 5,070 PSI with Switch.

Features:
• Soft switching behavior
• Fatigue-free spring
• Particularly easy to maintain
• Low pressure drop
• Valve elements made of high-grade stainless steel and ceramic

Flyer

Specifications:
• Pressure:1,000 - 5,070 PSI
• Flow Rate: 13 GPM
• Max Temperature: 176° F
• Maximum inrush current 10mA-5A(2A)
• VoItage: 12-24VDC 12-250VAC
• Protection CIass: IP65
• CabIe:1.2 meters 3xAWG20
• Inlet Port: 3/8" FPT
• Outlet Port: 3/8” FPT
• Bypass Ports (2): 3/8” FPT
• Weight: 2.25 lbs