We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
Learn more
Low Prices
Fast Shipping!
SINCE 1991
Ag Spraying Equipment, Hoses,Pressure Washers, Sewer Jetters,
Water Pumps & More
- CATEGORIES
Shop By Category
- Auto & Truck Detailing
- Clamps
- Coupling & Quick Disconnects
- Facility Cleaning & Maintenance
- Filters & Strainers
- Fittings - Brass, Nylon, Polypropylene & Steel
- Gauges
- Hose & Tubing
- Hose Reels & Hangers
- Hydraulic Cylinders & Accessories
- Hydro Excavation
- LP-Gas, Nat Gas, RV's & Campers
- Pressure Washer
- Pumps
- Repair Kits & Parts
- Sewer Cleaning
- Soft Wash Units & Accessories
- Sprayers, Accessories & Parts
- Swivels
- Tools
- Valves
- BRANDS
- SHIPPING QUOTE
- ABOUT
- GENERAL INFORMATION
- CONTACT US
Suttner America
Sort by
Display
per page
1/4" Suttner #8.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110219080
1/4” Suttner # 8.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 8.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): 1.18”
• Length: 1.97”
• Weight: 7.87 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $164.73
1/4" Suttner #10.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110219100
1/4” Suttner # 10.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): 1.18”
• Length: 1.97”
• Weight: 7.87 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $164.73
1/4" Suttner #12.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110219120
1/4” Suttner # 12.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): 1.18”
• Length: 1.97”
• Weight: 7.87 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $164.73
1/4" Suttner #15.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110219150
1/4” Suttner # 15.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): 1.18”
• Length: 1.97”
• Weight: 7.87 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $164.73
1/4" Suttner #20.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110219200
1/4” Suttner # 20.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): 1.18”
• Length: 1.97”
• Weight: 7.87 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $164.73
1/4" Suttner #6.5 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110219065
1/4” Suttner # 6.5 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 6.5
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): 1.18”
• Length: 1.97”
• Weight: 7.87 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $164.73
3/4" Suttner #40.0 ST-49 Milling Sewer Nozzle 3 Front 6 Rear 3,625 PSI
SKU: 652300040400
3/4” Suttner #40.0 ST-49 Milling Sewer Cleaning Nozzle. With 3 Front and 6 Rear jets and rated to 3,625 PSI
Features:
• High Quality, German engineered components
• With its 3 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• Centric jet is plugged
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 40.0
• Material: Stainless steel
• Maximum Pressure: 3,625 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.50”
• Weight: 12.45 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $165.33
3/4" Suttner #40.0 ST-49 Milling Sewer Nozzle 1 Centric 3 Front 6 Rear 3,625 PSI
SKU: 652300040401
3/4” Suttner #40.0 ST-49 Milling Sewer Cleaning Nozzle. With 1 Centric, 3 Front and 6 Rear jets and rated to 3,625 PSI
Features:
• High Quality, German engineered components
• With its 4 very strong concentrated forward jets and the sharp cutting edges the milling type nozzles will tear through almost any kind of blockage
• The sharp edges cut, break and penetrate through every kind of blockage
• Made out of wear-resistant, hardened stainless steel
• 1 Centric front jet with nozzle insert
• 3 Lateral front jets with nozzle inserts
• 6 Rear jets with nozzle inserts
• Nozzle is equipped with replaceable hardened stainless steel nozzle inserts
• Due to this feature the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer
Applications:
• Penetration of completely clogged pipes
• Opening of root masses
• Opening of frozen pipelines
• Hydraulic thrust boring flushing operations
Specifications:
• Nozzle Size: # 40.0
• Material: Stainless steel
• Maximum Pressure: 3,625 PSI
• Inlet: 3/4” Female
• Outside Diameter (O.D.): 1.50”
• Weight: 12.45 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $165.33
Suttner ST-1200S Stainless Steel Wash Down Gun 700 PSI (Food Grade)
SKU: 201200520
Suttner ST-1200 Stainless Steel Food Grade Wash Down Gun 700 PSI 27 GPM. Ideal for high volume low pressure needs, such as farm, chemical or food industries. ST-1200 SS has stainless steel housing for chemical resistance. Ideal for food grade applications.
Features:
• Durable spray gun with rubber sheathing protects against cold, heat and impact
• Adjusting screw retains desired spray pattern
• Fixing clamp holds back trigger allowing comfort and steady spray
• Comes with trigger guard
• Food Grade
Specifications:
• Housing: Stainless steel
• Inlet: 1/2” FNPT
• Maximum Pressure: 700 PSI
• Max. Flow Rate: 27 GPM
• Max. Temp.: 190º F.
• Color: Blue
• Weight: 2.05 lbs.
Price: $167.25
Suttner ST-36 Sludge Pump (04.0) w/ 25' Hose, 1/4" QC
SKU: 999QC2540
Suttner ST-36 Sludge Pump (04.0) w/ 25' Hose, 1/4" QC Inlet. Attaches to pressure washer and turns it into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills
Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"
Suttner ST-36 Sludge Pump In Action on YouTube
Specifications
• Nozzle Size: 4.0 (0 degree)
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Hose Length: 25’
• Max Temp: 104° F.
• Inlet: 1/4" Male QC Plug
• Weight: 8.5 lb
Please use Nozzle Chart to determine proper nozzle size
Price: $169.70
3/8" Suttner #8.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110319080
3/8” Suttner # 8.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 8.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $172.33
3/8" Suttner #10.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110319100
3/8” Suttner # 10.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $172.33
3/8" Suttner #12.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110319120
3/8” Suttner # 12.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $172.33
3/8" Suttner #15.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110319150
3/8” Suttner # 15.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 15.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $172.33
3/8" Suttner #20.0 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110319200
3/8” Suttner # 20.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 20.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $172.33
3/8" Suttner #6.5 Warhead Radial Sewer Nozzle 1 Front 6 Side 3 Rear 7,250 PSI
SKU: 649110319065
3/8” Suttner # 6.5 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe
Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life
Specifications:
• Nozzle Size: # 6.5
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 3/8” Female
• Outside Diameter (O.D.): 1.38”
• Length: 2.17”
• Weight: 11.08 oz
| Nominal Thread Size (NPT) |
1/8"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
1"
|
| Actual I.D. Measurement |
3/8"
|
1/2"
|
5/8"
|
3/4"
|
1"
|
1-3/8"
|
Please use Nozzle Chart to determine proper nozzle size
Price: $172.33
Suttner ST-23 Turbo Foam Brush # 4.0 Orifice, 2200 PSI, 122° F, 1/4" FPT
SKU: 200023710040
Suttner ST-23 Turbo Foam Brush with # 4.0 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces
Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape
See ST-23 Turbo Foam Brush in action on YouTube
Specifications
• Orifice Size: 4.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb
Price: $172.52
Suttner ST-23 Turbo Foam Brush # 8.0 Orifice, 2200 PSI, 122° F, 1/4" FPT
SKU: 200023710080
Suttner ST-23 Turbo Foam Brush with # 8.0 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces
Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape
See ST-23 Turbo Foam Brush in action on YouTube
Specifications
• Orifice Size: 8.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb
Price: $172.52
Suttner ST-23 Turbo Foam Brush # 10.0 Orifice, 2200 PSI, 122° F, 1/4" FPT
SKU: 200023710100
Suttner ST-23 Turbo Foam Brush with # 10 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces
Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape
See ST-23 Turbo Foam Brush in action on YouTube
Specifications
• Orifice Size: 10.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb
Price: $172.52
Suttner ST-23 Turbo Foam Brush # 13.0 Orifice, 2200 PSI, 122° F, 1/4" FPT
SKU: 200023710130
Suttner ST-23 Turbo Foam Brush with # 13 Orifice. Foam like your at a car wash, brush bristles made from Chinese Highland Hogs, soft for delicate surfaces
Features
• Brush bristles are made from Chinese Highland Hogs for soft delicate surfaces
• Reduces chemical intake without changing foam quality
• Lasts longer and doesn't lose its shape
See ST-23 Turbo Foam Brush in action on YouTube
Specifications
• Orifice Size: 13.0
• Max Flow: 6.0 GPM
• Max Pressure: 2,200 PSI
• Max Temp: 122° F.
• Inlet: 1/4" FPT
• Weight: 1.35 lb
Price: $172.52
power equipment and supply
Copyright © 2025 PWMall.com. All Rights Reserved.