Suttner America

Suttner ST-160M Stainless Steel Single Chemical Injector w/Metering Valve, #4.0, 5000 Psi, 3/8" F x 3/8” M

Features
• Food grade quality and specifications
• Stainless steel construction
• Conserves chemicals
• Locks in position for accurate metering
• Multiple metering positions

Specifications
• Orifice: 4.0
• Max Flow Rate: 21 GPM
• Min Flow Rate: 1 GPM
• Max Pressure: 5,000 PSI
• Min Pressure: 1,000 PSI
• Max Temp: 194° F.
• Inlet: 3/8” Female
• Outlet: 3/8” Male
• Hose Barb: .35” ID hose
• Weight: 1.25 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Stainless Steel Housing
• Tungsten carbide ball with special valve seat

Specifications
• Max Pressure: 7,300 PSI
• Max Flow: 8.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.32 lb

Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Adjustable handle
• Chemical resistant

Specifications:
• Length: 40"
• Pipe Material: Stainless steel
• Inlet: 1/2” Male NPT
• Outlet: 1/4” Female NPT
• Maximum Pressure: 8,700 PSI
• Max. Temp.: 300° F
• Weight: 3.0 lbs.

2"

Suttner ST-458 # 12.0 Hydro Ex Turbo Nozzle with Red Extended Poly Cover. This 1/2” Inlet hydro excavation nozzle is rated up to 6,000 PSI.

Features
• The outlet cover extension greatly decreases the chance of dirt and debris getting to the nozzle tip and seat area
• Significant Increase in lifetime of nozzle
• Molded and wear resistant poly cover

Hydro Ex Nozzle Flyer

Specifications
• Nozzle Size # 12.0
• Max PSI: 6,000
• Max Temp.: 190° F
• Inlet: 1/2" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 12.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 15.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-458 Turbo / Rotating #11.0 Nozzle is rated for up to 6,000 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 11.0
• Max PSI: 6,000
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 1.60 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features:
• Easy construction
• Especially soft switching behavior
• Easily operated adjustment and shifting
• Adjustable minimum and maximum pressure
• Extremely long durability
• Adjustable from 850 to 5,070 PSI
• 1/2” Bypass connection

Specifications:
• Maximum Pressure: 5,070 PSI
• Minimum Pressure: 850 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/2” FNPT
• Weight: 2.60 lbs

Suttner ST-72 Stainless Steel 47.25” Vented Grip Foam Lance with #2.0 mm (Green) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.0 mm (Green)
• Max Pressure: 3,625 PSI
• Length: 47.25”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 2.45 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 47.25” Vented Grip Foam Lance with #2.3 mm (Yellow) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 2.3 mm (Yellow)
• Max Pressure: 3,625 PSI
• Length: 47.25”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 2.45 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 47.25” Vented Grip Foam Lance with #3.0 mm (Blue) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.0 mm (Blue)
• Max Pressure: 3,625 PSI
• Length: 47.25”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 2.45 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-72 Stainless Steel 47.25” Vented Grip Foam Lance with #3.2 mm (Red) Air Injector Nozzle and 1/4" M Inlet. In conjunction with a spray gun and Suttner foam injector, allows cleaning agents or disinfectants to be applied evenly over a large surface. Stainless steel construction

Features
• Thick foam is produced when air flows through vented injector housing and mixes with water and chemical stream
• Wet foam allows more efficient use of chemical
• More durable than conventional foamers

Specifications
• Air Injector Nozzle Size: 3.2 mm (Red)
• Max Pressure: 3,625 PSI
• Length: 47.25”
• Max Temp: 176° F.
• Inlet: 1/4" Male
• Note: Suttner ST-160, ST-160M or St-164 Chemical or Foam injector required and is not included
• Weight: 2.45 lb

Please use Nozzle Chart to determine proper Spray Nozzle Size

Nozzle Chart

Use Spray Nozzle Size and Foam Lance Chart to determine correct Air Injector Nozzle Size to use

Foam Lance Chart

Suttner ST-55 Sandblasting Kit #4.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 4.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Suttner ST-55 Sandblasting Kit #5.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 5.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #6.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 6.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #7.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 7.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-55 Sandblasting Kit #8.0 with Adjustable Sand Flow Valve. Removes coatings from almost any surface. Designed for sandblasting a variety of surfaces and capable of removing most coatings down to white metal. Graffiti clean up, paint

FEATURES:
• High Quality, German engineered components
• Adjustable sand volume valve
• Works on venturi principle
• Silver steel sand nozzle
• Use silica sand for best results
• 13 ft hose
• Grain Size 0.2 mm - 0.8 mm

SPECIFICATIONS:
• Nozzle Size: # 8.0
• Max Pressure: 3,500 PSI
• Min Flow Rate: 2 GPM
• Max Flow Rate: 8 GPM
• Max Temp: 194° F
• Sand Consumption: Max 750 lbs per hour
• Inlet: 1/4"Male NPT
• Weight: 4.92 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner # 8.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 8.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.58”
• Length: 2.76”
• Weight: 22.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner # 10.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 10.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.58”
• Length: 2.76”
• Weight: 22.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/2” Suttner # 12.0 Warhead / Egg Radial Sewer Cleaning Nozzle. With 1 Front, 6 Side and 3 Rear jets and rated to 7,250 PSI. The ideal tool for the toughest applications of hard grease and scale that may be encrusted on the interior wall of the pipe

Features:
• High Quality, German engineered components
• Best performing and most durable design for higher efficiency
• These are light and agile used as a great all around nozzle with replaceable inserts. They include a forward jet
• The egg-type radial nozzle is wear resistant and cost competitive
• Great for sanitary applications
• With unrivaled cleaning power on heavy encrusted grease and sludge
• Hardened stainless steel body and replaceable nozzle inserts for longer life

Specifications:
• Nozzle Size: # 12.0
• Jets: 1 at 0°
• Jets: 6 at 75°
• Jets: 3 at 30°
• Material: Stainless steel
• Maximum Pressure: 7,250 PSI
• Inlet: 1/2” Female
• Outside Diameter (O.D.): 1.58”
• Length: 2.76”
• Weight: 22.22 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart