Valley Industries

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon lever handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 3/8" Female NPT
• Outlet: 3/8" Male NPT
• Weight: 3.5 oz

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon lever handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Male NPT
• Weight: 3.5 oz

Specifications
• 1,000 lbs Wheel capacity
• 6” Steel caster wheel
• Includes pin
• Zinc plated frame
• Weight: 4.35 Lbs

Specifications
• Includes pin
• Zinc Plated
• Base Size 4.25” x 6.25”
• Weight: 1.75 Lbs

Specifications
• 1,000 lbs Wheel Capacity
• 6” Poly caster wheel
• Includes pin
• Zinc plated frame
• Weight: 3.35 Lbs

Specifications
• Mounting Tube: Outer
• Inside Dia.: 2.53”
• Outside Dia.: 2.99”
• 9/16" pin hole
• Zinc Plated
• Use with # VI-701 Weld On Bracket
• Weight: 1.25 Lbs

Specifications
• Mounting Tube: Inner
• Inside Dia.: 1.49”
• Outside Dia.: 2.01”
• 9/16" pin hole
• Zinc Plated
• Use with # VI-701 Weld On Bracket
• Weight: 0.60 Lbs

Specifications
• Max. Capacity: 7,000 Lbs
• Lift Travel: 26”
• Length Retracted: 25.0”
• Jack Type: HD Square Tube
• Jack Tube Size (Outer): 2.50”
• Jack Tube Size (Inner): 2.25”
• Crank Type: Top wind
• Mount Type: Weld on (not included, see below for options)
• Ground Support: 8” x 6” Foot plate (telescoping)
• Grease Fitting: Yes
• Weight: 22.5 Lbs

Specifications
• Includes 9/16" pin and chain
• Zinc Plated
• Use with # 64.002.00 and 64.003.00 mounting tubes
• Weight: 1.70 Lbs

Specifications
• Max. Capacity: 7,000 Lbs
• Lift Travel: 26”
• Length Retracted: 25.0”
• Jack Type: HD Square Tube
• Jack Tube Size (Outer): 2.50”
• Jack Tube Size (Inner): 2.25”
• Crank Type: Side wind
• Mount Type: Weld on (not included, see below for options)
• Ground Support: 8” x 6” Foot plate (telescoping)
• Grease Fitting: Yes
• Weight: 23.4 Lbs

Specifications
• Max. Capacity: 5,000 Lbs
• Lift Travel: 15”
• Length Retracted: 23.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on tube mount, inside
• Mount Height: 15.50”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 14.5 Lbs

Specifications
• Max. Capacity: 5,000 Lbs
• Lift Travel: 15”
• Length Retracted: 22.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Side wind
• Mount Type: Weld on tube mount, outside
• Mount Height: 15.50”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 17.5 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 15”
• Length Retracted: 22.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on tube mount, inside
• Mount Height: 15.50”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 14.0 Lbs

Specifications
• Max. Capacity: 5,000 Lbs
• Lift Travel: 13.5”
• Length Retracted: 23.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: A- Frame, 3 hole flange
• Mount Height: 7.0”
• Ground Support: Optional foot plate & wheels shown below
• Grease Fitting: Yes
• Weight: 10.5 Lbs

Specifications
• Max. Capacity: 12,000 Lbs
• Lift Travel: 26”
• Length Retracted: 28.0”
• Jack Type: HD Square Tube
• Jack Tube Size (Outer): 4”
• Jack Tube Size (Inner): 3.5”
• Crank Type: Side wind – handle included!
• Mount Type: Weld on (not included)
• Ground Support: 8” x 8” Foot plate (telescoping)
• Grease Fitting: Yes
• Weight: 61.5 Lbs

Specifications
• Max. Capacity: 5,000 Lbs
• Lift Travel: 10”
• Length Retracted: 17.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Side wind
• Mount Type: Weld on tube mount, outside
• Mount Height: 11.0”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 15.5 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 10”
• Length Retracted: 17.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on tube mount, inside
• Mount Height: 11.25”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 12.0 Lbs

Specifications
• Max. Capacity: 1,500 Lbs
• Lift Travel: 10”
• Length Retracted: 28.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0”
• Crank Type: Side wind
• Mount Type: Bolt on (comes with all mounting hardware)
• Ground Support: Single HD wheel (2”w x 8”d)
• Weight: 17.50 Lbs

Specifications
• Max. Capacity: 1,500 Lbs
• Lift Travel: 10”
• Length Retracted: 25.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0”
• Crank Type: Side wind
• Mount Type: Bolt on (comes with all mounting hardware)
• Ground Support: Dual wheels (2”w x 6”d)
• Weight: 19.0 Lbs

Specifications
• Max. Capacity: 1,000 Lbs
• Lift Travel: 10”
• Length Retracted: 23.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.0”
• Jack Tube Size (Inner): 1.75”
• Crank Type: Side wind
• Mount Type: Bolt on (comes with all mounting hardware)
• Ground Support: Single wheel (2”w x 6”d)
• Weight: 15.0 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 15”
• Length Retracted: 22.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on flange kit (Flange, pin, spring & clip)
• Mount Height: 16”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 14.5 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 13.5”
• Length Retracted: 21.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: A- Frame, 3 hole flange
• Mount Height: 7.0”
• Ground Support: Optional foot plate & wheels shown below
• Grease Fitting: Yes
• Weight: 9.5 Lbs

Specifications
• Max. Capacity: 2,000 Lbs
• Lift Travel: 10”
• Length Retracted: 18.0”
• Jack Type: Round Tube
• Jack Tube Size (Outer): 2.25”
• Jack Tube Size (Inner): 2.0
• Crank Type: Top wind
• Mount Type: Weld on flange kit (Flange, pin, spring & clip)
• Mount Height: 11.0”
• Ground Support: 7.6” x 3.8” Foot plate
• Grease Fitting: Yes
• Weight: 13.0 Lbs

FEATURES:
• Inlet Connection: 3/8 Hose barb
• Overall Length: 30”
• Plastic valve body with filter in handle
• Chromed aluminum extension is 19” long with a 30° offset tip
• # 18 Tip has adjusting pattern from cone spray to straight stream
• Trigger locks for continuous operation
• Weight: 0.30 lbs

Valley Industries SG-2218-18 pistol grip spot gun with adjustable nozzle tip. Works on ATV, Spot and Trailer sprayers with a 3/8 hose barb inlet. Features a special ergonomic design that helps you spray for long periods of time without the effects of fatigue

FEATURES:
• Ergonomic pistol grip handle
• Brass valve
• Max. pressure: 362 PSI
• Max. Flow: 8 GPM
• Inlet Connection: 3/8 Hose barb
• # 18 Tip has adjusting pattern from cone spray to straight stream
• Trigger locks for continuous operation
• Aluminum wand is 18”
• Overall Length: 26.7”
• Weight: 0.55 lbs

FEATURES:
• Ergonomic pistol grip handle
• Brass valve
• Max. pressure: 300 PSI
• Max. Flow: 7 GPM
• Inlet Connection: 3/8 Hose barb
• # 24 Tip has adjusting pattern from cone spray to straight stream
• Weight: 0.90 lbs

Valley Industries SG-2200 16" Long Range Misting Spray Gun 400 PSI 9 GPM. Reach new heights with the Valley Industries Universal Long Range Mist Spray Gun

Features:
• Easily handle up to 400 PSI and 9 GPM with this ergonomic one-handed spray gun
• With just a twist of the nozzle, change from a steady stream to a fine atomized mist spray pattern
• Prevent unwanted chemical drips with the include no-drip shut-off at end of spray nozzle
• Features a trigger lock for to reduce fatigue and increase operator comfort
• Spray up to 45 feet depending on the spraying equipment used
• Designed to be field repairable to minimize unnecessary downtime
• Includes a 3/8” hose barb connection for easy attachment to spot spraying hose
• Not for use with pressure washers

Application:
• Orchards
• Vineyards
• Livestock
• Nurseries & Tall Trees

Specifications:
• Max Pressure: 400 PSI
• Max Flow: 9 GPM
• Overall length: 16” (without hose barb)
• Connection: 3/8" Male hose barb
• Vertical Spray: 35’
• Horizontal Spray: 45’
• Nozzle: 1.8 MM orifice for 1.0-2.2 GPM pumps ( Others sizes available)
• Weighs 1.55 lbs

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 1,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT

• Inlet Washer with Cone Filter 304SS 50/60 Mesh
• For 3/4 FGH garden hose inlet connectors
• Replaces AR7369

Valley Industries Garden Hose Adapter with Cone Filter

Specifications:
• Stainless steel GHT tension spring on garden hose adapter
• Material: Brass
• 50 Mesh cone filter
• Inlet: Female garden hose (FGH)
• Replaces: AR7300
• Outlet: 1/2" Male

Polypropylene 3/4" MPT x 1/2" FPT Hex Head Bushing.

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Hexagon Head Bushing
• Male NPT x Female NPT

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon butterfly t-handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Male NPT
• Weight: 3.4 oz

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon butterfly t-handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 3/8" Female NPT
• Outlet: 3/8" Female NPT
• Weight: 3.5 oz

Specifications:
• Chromed brass body, ball & stem
• Teflon® seat & Viton® seals
• Nylon butterfly t-handle
• Rating (CWP): 200 PSI
• Operating Temperature: -4º to 250º F
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 3.6 oz

Specifications:
• Size: 048
• Min. Clamp Dia.: 2-1/2”, 65mm
• Max. Clamp Dia.: 3-1/2”, 89mm
• Band Width: 1/2”
• Band, Housing & Screw: Series 300 Stainless Steel
• Weight: 1.0 oz

Specifications:
• Size: 040
• Min. Clamp Dia.: 2”, 52mm
• Max. Clamp Dia.: 3”, 76mm
• Band Width: 1/2”
• Band, Housing & Screw: Series 300 Stainless Steel
• Weight: 0.9 oz

Specifications:
• Size: 032
• Min. Clamp Dia.: 1-1/2”, 38mm
• Max. Clamp Dia.: 2-1/2”, 63mm
• Band Width: 1/2”
• Band, Housing & Screw: Series 300 Stainless Steel
• Weight: 0.9 oz

• Black Polypropylene Hose Barb - 90° Elbow
• Male NPT inlet x hose barb outlet

• Black Polypropylene Hose Barb - 90° Elbow
• Male NPT x hose barb

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 1,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 6.8 oz

Specifications:
• Size: 016
• Min. Clamp Dia.: 11/16”, 17mm
• Max. Clamp Dia.: 1-1/4”, 38mm
• Band Width: 1/2”
• Band, Housing & Screw: Series 300 Stainless Steel
• Weight: 0.7 oz

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 2,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1" Female NPT
• Outlet: 1" Female NPT

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 2,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 2,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 9.7 oz

Specifications:
• Investment Cast Body and Cap
• Teflon® seals and seats for smooth operation and proper seating characteristics
• Rating (W.O.G.): 1,000 PSI
• Operating Temperature: -60º to 450º F
• Adjustable stem packing
• Blow-out proof stem and ball are made of 316 stainless steel
• Locking device on handle
• Inlet: 1" Female NPT
• Outlet: 1" Female NPT

Specifications
• Material: Brass
• Inlet: 3/4" Female GH
• Outlet: 3/8" MPT

Valley Industries SG-3200 Long-Range Spray Gun - 30 GPM

Features:
• "Long Range" Gun sprays up to 85’
• Continuous spray pattern adjustment from cone mist to long, straight stream
• Ergonomic handle with hand guard and trigger lock
• Ideal for long-range roof and tree top spraying with proper equipment

Specifications:
• 1,000 PSI max. pressure
• 30 GPM max. volume
• 26.5” Overall length
• Adjusts from straight stream to full cone mist
• 1/2" Male hose barb inlet
• # 1.8 Spray tip included
• Weighs 3.5 lbs

• Black Polypropylene Hose Barb
• Male NPT x hose barb

• White Nylon Hose Barb - 3 Way Tee
• Size: 1/2" MHB
• 3 Way - hose barb x hose barb x hose barb

• Black Polypropylene Close Pipe Nipple
• Male NPT

Polypropylene 1" MPT Pipe Plug

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Pipe Plug
• Male NPT

Polypropylene 3/4" MPT Pipe Plug

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Pipe Plug
• Male NPT

Polypropylene 1/2" MPT Pipe Plug

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Pipe Plug
• Male NPT

Polypropylene 3/8" MPT x 1/4" FPT Hex Head Bushing.

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Hexagon Head Bushing
• Male NPT x Female NPT

Polypropylene 1" MPT x 3/4" FPT Hex Head Bushing.

Features:
• Polypropylene fittings are generally acceptable for use at working pressures up to 150 PSI at ambient temperatures
• Polypropylene is resistant to a broad range of chemicals including most agricultural chemicals, acid based fertilizers, ammonium compounds, calcium carbonate, ethanol, hydrochloric acid, magnesium sulfate, oxalic acid, proprionic acid, phosphoric acid and sodium compounds

Specifications:
• Black Polypropylene Hexagon Head Bushing
• Male NPT x Female NPT

Master Mfg. 2.1 Gallon (8 Liter) Handheld Sprayer. This pump up sprayer is ideal for applying pesticides, insecticides, fertilizers, herbicides and disinfectants

Features:
• Lightweight and Easy to Use
• Convenient Adjustable Shoulder Strap
• Handle-Action Piston Pump
• Single Adjustable Spray Tip
• Easy To Use Spot Spray Wand
• Large Mouth for Easy Filling
• Pressure Relief Valve
• Ergonomic Handle

Applications:
• Trees and shrubs
• Insect control
• Ranch and farm
• Industrial
• Home
• Weed control
• Livestock
• Construction
• Municipalities

Specifications:
• Capacity: 2.1 Gallons ( 8.0 Liters)
• Pressure: 43 PSI
• Spray Wand: 18”
• Chemical Resistant Hose: 48”
• Warranty: 1 Year Limited
• Net Weight: 3.4 Lbs.

FEATURES:
• Adjusts from 32” to 50”
• Tip has adjusting pattern from cone spray to straight stream
• Quick release trigger lock
• Aluminum telescoping pipe
• 3/8” Hose barb inlet connection
• Weight: 2.0 Lbs

Valley Industries PBV Polypropylene 3/8" HB x 3/8" HB 150 PSI Ball Valve

Valley Industries Series 40 Dual Scale Industrial 10,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

Features:
• Dial Range (PSI): 0 – 10,000
• Dial Range (BAR): 0 – 700
• Casing: 2 1/2" Diameter
• Movement: Brass
• Bourdon Tube: Helical in phosphor bronze
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Polycarbonate – temperature compensating
• Case Material: 304 Stainless steel
• Mounting: Bottom
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.50 lbs.

Valley Industries Series 41 Single Scale OEM 6,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

Features:
• Dial Range: 0 – 6,000 PSI
• Casing: 2 1/2" Diameter
• Movement: Brass
• Bourdon Tube: Helical in phosphor bronze
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Acrylic
• Case Material: 304 Stainless steel
• Mounting: Bottom
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• ASME/ANSI B40.1 Grade B (3-2-3%)
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.50 lbs.

Valley Industries Series 41 Single Scale OEM 5,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

Features:
• Dial Range: 0 – 5,000 PSI
• Casing: 2 1/2" Diameter
• Movement: Brass
• Bourdon Tube: Helical in phosphor bronze
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Acrylic
• Case Material: 304 Stainless steel
• Mounting: Bottom
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• ASME/ANSI B40.1 Grade B (3-2-3%)
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.50 lbs.

Valley Industries Series 41 Single Scale OEM 4,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

Features:
• Dial Range: 0 – 4,000 PSI
• Casing: 2 1/2" Diameter
• Movement: Brass
• Bourdon Tube: Helical in phosphor bronze
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Acrylic
• Case Material: 304 Stainless steel
• Mounting: Bottom
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• ASME/ANSI B40.1 Grade B (3-2-3%)
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.50 lbs.

Valley Industries Series 41 Single Scale OEM 3,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

Features:
• Dial Range: 0 – 3,000 PSI
• Casing: 2 1/2" Diameter
• Movement: Brass
• Bourdon Tube: Helical in phosphor bronze
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Acrylic
• Case Material: 304 Stainless steel
• Mounting: Bottom
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• ASME/ANSI B40.1 Grade B (3-2-3%)
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.50 lbs.

Valley Industries Series 41 Single Scale OEM 2,000 PSI Bottom Mount 2-1/2" SS Pressure Gauge. These gauges are designed for use with any medium not corrosive to brass or bronze. Liquid-filled gauges are recommended for reducing shock caused by pressure fluctuations or vibration

Features:
• Dial Range: 0 – 2,000 PSI
• Casing: 2 1/2" Diameter
• Movement: Brass
• Bourdon Tube: Helical in phosphor bronze
• Pointer: Black enameled aluminum
• Dial: White aluminum
• Window: Acrylic
• Case Material: 304 Stainless steel
• Mounting: Bottom
• Connection Material: Brass
• Connection Size: 1/4" MNPT
• ASME/ANSI B40.1 Grade B (3-2-3%)
• Fill Material: Glycerin (liquid)
• Wetted Parts: Copper alloy
• Weight: 0.50 lbs.

• Inline Can-Type Water Filter/Strainer
• Heavy duty molded polypropylene
• Bowl: Clear
• Ports: 1" FPT
• Mesh: #80 Stainless steel
• Gasket: EPDM

• Inline Can-Type Water Filter/Strainer
• Heavy duty molded polypropylene
• Bowl: Clear
• Ports: 1" FPT
• Mesh: #40 Stainless steel
• Gasket: EPDM

Valley Industries Polypropylene 1” FPT Inline Can-Type Water Filter/Strainer

Specifications:
• Heavy duty molded polypropylene
• Bowl: Black
• Ports: 1" FPT
• Mesh: #40 Stainless steel
• Gasket: EPDM
• Weight: 0.85 lbs.