GP TS12190 High Limit TS Series Thermal Switch 1/2" NPT 190º F with 68" Wire Lead
Features• Simple installation• 68” 18 AWG Cable• Normally Closed• Can be mounted in any position• Factory calibrated• Made in the USA• Precision snap action internal switches
TS Series Snap Action Data Sheet
Specifications• Maximum Pressure: 5,000 PSI• Voltage: 5 AMPS at 120 VAC • Cord Length: 68”• Temperature: 190º F• Inlet: 1/2” NPT• Switch Dimensions: 2.5" x 1"• Materials: Brass, Steel, Nylon, Epoxy• Weight: 0.5 Lb
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/food.
General Pump D10002 Quick Disconnect Coupler Socket Brass 1/4” x 1/4" NPT-M 5,000 PSI
Features: • Quick disconnect design• Brass• EPDM O-Ring
Specifications: • Quick Disconnect Coupler: Socket• Body Material: Brass• Socket Size: 1/4"• Thread: 1/4” NPT-M• Max Temp: 175°• Max Operating Pressure: 5,000 PSI• Replaces QCS1MB• Weight: 0.17 lb
Suttner 38” ST-54 Dual Lance 4,500 PSI With Brass Soap Nozzle. For use when high and low pressures are needed. For example, spraying cleaning agents with low pressure through an injector valve (chemical injector required) and then cleaning with high pressure
Features• Made In Germany - High Quality, German engineered components• High or low pressure operation is controlled by twisting the side handle• The side handle helps manage the lance with ease for longer working periods• Threads are rolled on providing consistent sealing and four times the strength than cut threads• Lance is equipped with 65° x #30 low pressure brass soap nozzle
Specifications • Max Pressure: 4,500 PSI• Length: 38”• Max Temp: 300° F. • Lance Material: Plated steel• Inlet: 1/4" Male NPT• Outlets: 1/4" Female NPT x 1/4” Soap Nozzle• Note: 1/4” MPT Nozzle not included• Weight: 2.72 lb
PA PR16 / General Pump YPRESSWITCH 5,000 PSI Pressure Switch with 580 PSI (Black) activation and 1/4" NPT-M stainless steel inlet. Electro-mechanical device, which, upon reaching a pre-set pressure (580 PSI) , opens or closes an electrical control contact
Specifications• Activation (Black) PSI: 580• Max. Voltage: 250• Permissible Pressure: 5,000 PSI• Rated Temp: 165° F• Max. Curr. Strength: 16 (A) – resistive load - 6 (A) – inductive load • Electrical insulation: 55 IP• Connection Material: Stainless Steel• Cable Length: 47" (1200 mm)• Electric Wire: 3 x 1 mm• Inlet: 1/4" NPT-M• Weight: 6.56 oz.
General Pump 100534 6,000 PSI Safety Relief Valve 3/8” MPT-N. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system
Features:• High pressure safety valve: 2,500 – 6,000 PSI relief pressure • One model fits all pressures - no springs to change• Less “whistling” and chatter than competing brands• Highly accurate over full range of pressures• Fits any brand of pump• Designed and made in the USA
Specifications:• Adjustable Range: 2,500 - 6,000 PSI• Max Volume: 6 GPM • Discharge: End• Max Temperature: 32 - 150° F • Inlet: 3/8" NPT-M• Dimensions: 2.6” x .875” Hex• Weight: 0.325 lbs