Bolt-On/Integral Unloader

Specifications:
• Max. Volume: 4.0 GPM
• Adjustable pressure
• Fixed chemical injector
• Brass body with aluminum bypass
• Built-In bypass channel
• Max. Fluid Temp.: 165° F.
• Inlet Port: 3/8" FPT
• Discharge Port: 3/8” MPT
• Weight: 1.90 lbs.

Specifications:
• Max. Volume: 4.0 GPM
• Adjustable pressure
• No chemical injector
• Brass body with aluminum bypass
• Built-In bypass channel
• Max. Fluid Temp.: 165° F.
• Inlet Port: 3/8" FPT
• Discharge Port: 3/8” MPT
• Weight: 1.85 lbs.

Specifications:
• Max. Volume: 4.0 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body with aluminum bypass
• Built-In bypass channel
• Max. Fluid Temp.: 165° F.
• Inlet Port: 3/8" FPT
• Discharge Port: 3/8” MPT
• Weight: 1.90 lbs.

General Pump YVB35KDME Direct-Mount, Control Set Unloader Used with ET, EP & ES Series Pumps

Featuring:
• Direct-mount, control set unloader
• Used with ET, EP and ES Series pumps
• Built-in bypass
• Sturdy steel and brass construction
• Adjustable locknut to control the maximum pressure
• Plastic adjustment knob (not pictured)

Specifications:
• Rated Pressure: 3,200 PSI
• Minimum Adjustable Pressure: 319 PSI
• Maximum Discharge Pressure: 3.650 PSI
• Rated Volume: 6.5 GPM
• Pressure Drop to Reset Bypass: 19%
• Max. Fluid Temp.: 195° F.
• Inlet Port: 1/2” BSP-F
• Outlet Port: 3/8” BSP-M
• Materials: Brass, Stainless Steel, Buna-N
• Overall Dimensions: 5.9” x 3.0” x 1.75”
• Weight: 1.8 lbs

Gereral Pump YVB135KDM Direct Mount Unloader Fits General Series Pumps: TT & TP 51 Series Pumps

• Maximum Pressure: 3,650 PSI
• Max. Volume: 6.5 GPM
• Adjustable pressure
• No Chemical Injector
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Port: 3/8" FPT
• Outel Port: 3/8” MPT
• Weight: 1.5 lbs

AR Blue Clean AR70064 is a replacement Unloader and TSS module made for direct fit to the AR630TSS, AR630TSS-HOT, and the AR767 models

This assembly comes prebuild as a complete unloader and TSS Module, ready for install. Simply disconnect your current TSS from the wire harness, remove and replace your current Banjo bolts, and you are up and running again.

This assembly is hassle free and can save you hours should you need to quickly get up and running.

Superseded Prod: AR22620

What's included in the Kit:
• Replacement Banjo Bolts (2)
• Replacement TSS Module w/ wire harness
• Replacement Unloader 0-Rings (2)
• Minimatic Unloader. Upper and Lower
• Replacement (Fixed) Chemical injector Nipple
• Replacement Two Part Unloader Knob

Warning:
• Pressure systems are dangerous. If you have any questions regarding this replacement module please AR Blue Clean directly

AR21039 Mini-Matic 4/B Bolt-On Unloader Fits AR RC, RCA, RCMA, RCV, XM, XMA, XMV, XT, XTA, XTV Pumps (Replaces Combi-Set)

Specifications:
• Maximum Pressure: 2,600 PSI
• Max. Volume: 2.0 – 3.0 GPM
• Adjustable pressure
• Adjustable chemical injector
• Brass body and bypass
• Built-In bypass channel
• Max. Fluid Temp.: 165° F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Bypass Ports: Built-In
• 2.5 lbs. Weight

Gereral Pump YVB135KDMI18 Direct Mount Unloader with 1.8 Chemical Injector. Fits General Series Pumps: TT & TP 51 Series Pumps

• Maximum Pressure: 2,600 PSI
• Max. Volume: 6.5 GPM
• Cemical Injector Size: 1.8mm
• Adjustable pressure
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Port: 3/8” BSPP-F
• Outel Port: 3/8” BSPP-M
• Weight: 1.7 lbs

GP YVB75KDMN21 Direct Mount Unloader with 2.1 MM Injector Fits General Series Pumps: 44 (EZ Pumps), 47, 60 and 63 (TX Pumps)

• Maximum Pressure: 3,650 PSI
• Max. Volume: 7.8 GPM
• Adjustable pressure
• Chemical Injector: 2.1mm
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Weight: 2.1 lbs