Softwash Trigger Guns & Lances

1/2" X 3" TBE Schedule 80 PVC Soft Wash Wand/Lance. This is a nipple fitting that is threaded on both ends

Specifications
• Size: 1/2" ID
• Length: 3"
• Material: PVC
• Schedule: 80
• End Type: 1/2" MPT x 1/2" MPT
• Working Pressure @ 73º F: 425 PSI
• Max Temperature: 140 F
• Weight: 0.05 lb

1/2" X 6" TBE Schedule 80 PVC Soft Wash Wand/Lance. This is a nipple fitting that is threaded on both ends

Specifications
• Size: 1/2" ID
• Length: 6"
• Material: PVC
• Schedule: 80
• End Type: 1/2" MPT x 1/2" MPT
• Working Pressure @ 73º F: 425 PSI
• Max Temperature: 140 F
• Weight: 0.10 lb

1/2" X 18" TBE Schedule 80 PVC Soft Wash Wand/Lance. This is a nipple fitting that is threaded on both ends

Specifications
• Size: 1/2" ID
• Length: 18"
• Material: PVC
• Schedule: 80
• End Type: 1/2" MPT x 1/2" MPT
• Working Pressure @ 73º F: 425 PSI
• Max Temperature: 140 F
• Weight: 0.30 lb

1/2" X 24" TBE Schedule 80 PVC Soft Wash Wand/Lance. This is a nipple fitting that is threaded on both ends

Specifications
• Size: 1/2" ID
• Length: 24"
• Material: PVC
• Schedule: 80
• End Type: 1/2" MPT x 1/2" MPT
• Working Pressure @ 73º F: 425 PSI
• Max Temperature: 140 F
• Weight: 0.35 lb

1/2” x 1/4” Schedule 80 PVC Reducer Coupling (FPT). This is a threaded end reducer coupling. Schedule 80 thickness for tough jobs with higher pressure requirements

Specifications
• Size: 1/2” x 1/4” Reducing
• Schedule: 80
• End Type: FPT x FPT
• Max Temp: 140° F
• Standards: ASTM D-1784, NSF for potable water services
• Weight: 0.05 lbs

1/2" X 30" TBE Schedule 80 PVC Soft Wash Wand/Lance. This is a nipple fitting that is threaded on both ends

Specifications
• Size: 1/2" ID
• Length: 30"
• Material: PVC
• Schedule: 80
• End Type: 1/2" MPT x 1/2" MPT
• Working Pressure @ 73º F: 425 PSI
• Max Temperature: 140 F
• Weight: 0.45 lb

1/2" X 36" TBE Schedule 80 PVC Soft Wash Wand/Lance. This is a nipple fitting that is threaded on both ends

Specifications
• Size: 1/2" ID
• Length: 36"
• Material: PVC
• Schedule: 80
• End Type: 1/2" MPT x 1/2" MPT
• Working Pressure @ 73º F: 425 PSI
• Max Temperature: 140 F
• Weight: 0.55 lb

The 50800 TriggerJet spray gun is a lightweight spray gun designed for use with backpack, canister or other low pressure sprayers. The TriggerJet is made of molded polypropylene for excellent chemical resistance and durability

FEATURES:
• 15” Polypropylene extension
• 38720-PPB-X18 adjustable ConeJet® tip with a 30° offset
• Polypropylene strainer located inside handle to prevent tip clogging
• Trigger lock permits locking gun in an open position for continuous flow

SPECIFICATIONSs:
• Max. Operating Pressure: 100 PSI
• Inlet Connection: 1/4” Hose barb
• Weight: 0.35 lbs

Suttner ST-510 Poly Chemical Spray Gun 18.5 GPM, 365 PSI, 1/2" F BSP

Features
• High Quality, German engineered components
• Reinforced polypropylene will withstand the harshest chemicals
• Gun with stainless steel V4A / AISI 316 ball being resistant to chemicals
• Ideal gun for use in soft wash applications

Specifications
• Max Pressure: 365 PSI
• Max Flow: 18.5 GPM
• Inlet: 1/2" Female BSP
• Outlet: 1/2" Female BSP
• UDOR # 15.0003.13
• Weight: 0.30 lb

PA RB 35 Blue Adjustable Width Spray Wash Down Gun with Inlet Swivel for Food Industry. RB35 suitable for use up to 175 PSI and 13.2 GPM

Features
• Low pressure washdown gun with body & housing in plastic material
• Water jet width adjustable by the trigger
    o Trigger completely drawn: pencil jet
    o Trigger released: 60° cone jet
• Plastic housing completely sealed
• Shockproof protective rings in soft rubber
• Inlet swivel
• Lightweight
• Reduced opening force

Specifications Sheet

Specifications
• Rated Pressure: 175 PSI
• Rated Flow Rate: 13.2 GPM
• Rated Temp: 120° F.
• Casing Color: Blue
• Gasket Material: Viton
• Piston Material: Brass
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1317S
• Weight: 15.73 oz

PA RB 65 Blue Adjustable Spray Wash Down Gun with 1/2" Bsp F Inlet for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in brass and Sst
• Ergonomic construction

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Piston Material: Brass
• Inlet: 1/2" Bsp F
• GP #: YG1635
• Weight: 33.3 oz

PA RB 65 Blue Adjustable Spray Wash Down Gun with 1/2" Npt F Inlet for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in brass and Sst
• Ergonomic construction

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Piston Material: Brass
• Inlet: 1/2" Npt F
• GP #: YG1635N
• Weight: 33.3 oz

PA RB 65 Blue Adjustable Spray Wash Down Gun with Inlet Swivel for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in brass and Sst
• Ergonomic construction
• Inlet swivel connection

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Piston Material: Brass
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1635S
• Weight: 37.39 oz

PA RB 65 Red Adjustable Spray Wash Down Gun with Inlet Swivel for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical/pencil jet and Stainless Steel Piston

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in brass and Sst
• Ergonomic construction
• Inlet swivel connection

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Red
• Seals Material: Viton
• Piston Material: aisi303 Sst
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1635SR
• Weight: 37.39 oz

Suttner ST-2320 Trigger Gun 2,170 PSI 21 GPM 1/2" F BSP SS Swivel Inlet 1/2" F BSP SS Outlet. The sturdy low- and medium-pressure gun made of plastics intended to come into contact with food and fitted with a high-quality brass/stainless steel valve

Features
• The rounded design of gun and handle prevent quick soiling and facilitate maintenance
• Comfortable ergonomic hand grip design
• Easy-Pull is designed for operators and applications with high-volume of trigger cycling
• The ST-2320 guns can be used everywhere: Industry, automotive, street cleaning, and towns
• Made of plastics intended to come into contact with food according to the Directive 1935/2004/EC
• Especially suitable for the food industry
• Ideal for soft wash systems
• Valve piston made of stainless steel
• High-quality design with EPDM seal and PEEK valve piston

ST-2320 Data Sheet

Specifications
• Inlet (Stainless Steel): 1/2” F BSP Swiveling by 360°
• Outlet (Stainless Steel): 1/2” F BSP
• Maximum Pressure: 2,170 PSI
• Max. Flow Rate: 21 GPM
• Max. Temp.: 300º F.
• Optional: Adjustable nozzle ST-51.1 # 200051750
• Weight: 1.75 lb

PA RB 65 Blue 316 Stainless Steel Adjustable Spray Wash Down Gun with Inlet Swivel for Food Industry. RB65 suitable for use up to 350 PSI and 16 GPM. Shockproof gun with adjustable conical jet suitable for corrosive liquids

Features
• Low pressure washdown gun with conical/pencil jet controlled by the trigger
• Adjustable screw to vary cone width from 0° to 60°
• Covered by semi-housings of non-stainable shockproof plastic, entirely sealed and with 3 rubber protective rings.
• Plastic trigger protected by hand guard
• Minimum fatigue for trigger opening and use
• Internal structure in Sst Aisi 316
• Ergonomic construction
• Inlet swivel connection

Specifications Sheet

Specifications
• Rated Pressure: 350 PSI
• Rated Flow Rate: 16.0 GPM
• Rated Temp: 195° F.
• Max Temp Continuous Use: 140° F.
• Casing Color: Blue
• Seals Material: Viton
• Internal Material: Stainless steel Aisi 316
• Swivel Inlet: 1/2" Bsp F
• GP #: YG1635SS
• Weight: 35.88 oz