Fairview USA Inc.

Accutek® S1000-D Steel 90° Elbow 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.37 lbs

Fairview CPC1469SW-6B 3/8 Tube OD x 1/4 MPT Composite D.O.T. Push-To-Connect 90° Male Swivel Elbow Air Brake Fitting. Fairview's 90° Male Pipe Swivel Elbows Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air Brakes
• Air Tanks
• Air Ride Suspension
• Sliders
• Tire Inflation
• Cab Controls

Product Features:
• Brass Collet
• Buna N O-ring
• Brass Tube Support
• Meets D.O.T. FMVSS 571.106
• Meets SAE J844
• Composite Body – Strong, Lightweight, Compact and Impact Resistant (Polypropylene)
• Plug-in configurations

Compatible Tubing:
• SAE J844 Type A & B nylon tubing

TECHNICAL DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: 90° Male Swivel Elbow
• Tube OD: 3/8"
• Pipe Thread: 1/4" MPT
• Temperature Range (Using Low temp Buna O-ring): -67°F (-55°C) to 248°F (120°C)
• Weight 0.06 lbs

Fairview X101-D 1/2 FPT x 1/2 FPT x 1/2 FPT Extruded Brass Tee. Fairview's Extruded Tee Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Extruded brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.41 lbs

Accutek® S1000-CB Steel 90° Elbow 3/8 Female Pipe x 1/4 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 4,000 PSI
• Burst Pressure: 16,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.24 lbs

Fairview CPC1469SW-4C 1/4 Tube OD x 3/8 MPT Composite D.O.T. Push-To-Connect 90° Male Swivel Elbow Air Brake Fitting. Fairview's 90° Male Pipe Swivel Elbows Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air Brakes
• Air Tanks
• Air Ride Suspension
• Sliders
• Tire Inflation
• Cab Controls

Product Features:
• Brass Collet
• Buna N O-ring
• Brass Tube Support
• Meets D.O.T. FMVSS 571.106
• Meets SAE J844
• Composite Body – Strong, Lightweight, Compact and Impact Resistant (Polypropylene)
• Plug-in configurations

Compatible Tubing:
• SAE J844 Type A & B nylon tubing

TECHNICAL DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: 90° Male Swivel Elbow
• Tube OD: 1/4"
• Pipe Thread: 3/8" MPT
• Temperature Range (Using Low temp Buna O-ring): -67°F (-55°C) to 248°F (120°C)
• Weight 0.07 lbs

Fairview CPC1469SW-6C 3/8 Tube OD x 3/8 MPT Composite D.O.T. Push-To-Connect 90° Male Swivel Elbow Air Brake Fitting. Fairview's 90° Male Pipe Swivel Elbows Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air Brakes
• Air Tanks
• Air Ride Suspension
• Sliders
• Tire Inflation
• Cab Controls

Product Features:
• Brass Collet
• Buna N O-ring
• Brass Tube Support
• Meets D.O.T. FMVSS 571.106
• Meets SAE J844
• Composite Body – Strong, Lightweight, Compact and Impact Resistant (Polypropylene)
• Plug-in configurations

Compatible Tubing:
• SAE J844 Type A & B nylon tubing

TECHNICAL DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: 90° Male Swivel Elbow
• Tube OD: 3/8"
• Pipe Thread: 3/8" MPT
• Temperature Range (Using Low temp Buna O-ring): -67°F (-55°C) to 248°F (120°C)
• Weight 0.08 lbs

Fairview CPC1468-8B 1/2 Tube OD x 1/4 MPT Composite D.O.T. Push-To-Connect Male NPT Connector Air Brake Fitting. Fairview's Male Pipe Connectors Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air Brakes
• Air Tanks
• Air Ride Suspension
• Sliders
• Tire Inflation
• Cab Controls

Product Features:
• Brass Collet
• Buna N O-ring
• Brass Tube Support
• Meets D.O.T. FMVSS 571.106
• Meets SAE J844
• Composite Body – Strong, Lightweight, Compact and Impact Resistant (Polypropylene)
• Plug-in configurations

Compatible Tubing:
• SAE J844 Type A & B nylon tubing

TECHNICAL DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: Male NPT Connector
• Tube OD: 1/2"
• Pipe Thread: 1/4" MPT
• Temperature Range (Using Low temp Buna O-ring): -67°F (-55°C) to 248°F (120°C)
• Weight 0.07 lbs

Accutek® S1007-B Steel Street Tee 1/4 Female Pipe x 1/4 Male Pipe x 1/4 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 5,000 PSI
• Burst Pressure: 20,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.18 lbs

Fairview PC1468-6C 3/8 Tube OD x 3/8 MPT Brass D.O.T. Push-To-Connect Male NPT Connector Air Brake Fitting. Fairview's Male Pipe Connectors Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air brake systems. Used with copper tubing for rigid plumbing along frame and air tank
• Use with J844D Nylon Air Brake Tube
• D.O.T. RECOGNIZED FOR ALL AIR BRAKE APPLICATIONS EXCEPT THOSE FOR USE BETWEEN FRAME AND AXLE OR BETWEEN TOWED AND TOWING VEHICLES

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: Male NPT Connector
• Tube OD: 3/8"
• Pipe Thread: 3/8" MPT
• Material: Brass
• Working Temperature: -40°F (-40°C) to 225°F (107°C)
• Weight 0.06 lbs

Fairview 103CV-C 3/8" Female Pipe Forged Brass Coupling Style Check Valve

INSTALLATION DATA SHEET

Features:
• 250 P.S.I. non-shock cold water
• Forged brass construction for greater strength
• May be installed horizontally or vertically
• Less than 1 P.S.I. cracking pressure
• Note: This valve is intended for use with air and water only

Specifications:
• Thread: 3/8 Female Pipe
• Max Pressure: 250 PSI
• Body Material: Forged brass
• Working Temperature: -20°F to 100°F
• Weight: 0.22 lbs

Accutek® S1010-HC Steel Hex Bushing 1 Male Pipe x 3/8 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 2,000 PSI
• Burst Pressure: 8,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.40 lbs

Fairview PC1474-4B 1/4 Tube OD x 1/4 MPT Brass D.O.T. Push-To-Connect 45° Male Elbow Air Brake Fitting. Fairview's 45° Male Pipe Elbows Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air brake systems. Used with copper tubing for rigid plumbing along frame and air tank
• Use with J844D Nylon Air Brake Tube
• D.O.T. RECOGNIZED FOR ALL AIR BRAKE APPLICATIONS EXCEPT THOSE FOR USE BETWEEN FRAME AND AXLE OR BETWEEN TOWED AND TOWING VEHICLES

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: 45° Male Elbow
• Tube OD: 1/4"
• Pipe Thread: 1/4" MPT
• Material: Brass
• Working Temperature: -40°F (-40°C) to 225°F (107°C)
• Weight 0.06 lbs

Fairview GAS-FLO™ CP-2220 1/4” OD x 20” Short Nose POL x 1/4 Swivel Male Inverted Flare Copper Propane Gas Pigtail. Fairview's Long POL To Inverted Flare Copper pigtails are ideal for use with Propane Gas

Applications:
• Propane gas copper pigtails and hogtails provide a flexible connection between the container valve and the regulator
• Solder connections Copper tube for PIGTAILS is 1/4" O.D. by .049 WALL
• Usage depends on application and requirements
• With soldered ends and a wide selection of connections and lengths

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Tube OD: 1/4”
• Approx. Length: 20”
• Tube Material: Copper
• End: Short Nose P.O.L
• End: 1/4 Swivel Male Inverted Flare
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 0.35 lbs

Fairview PC1469-4B 1/4 Tube OD x 1/4 MPT Brass D.O.T. Push-To-Connect 90° Male Elbow Air Brake Fitting. Fairview's 90° Male Pipe Elbows Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air brake systems. Used with copper tubing for rigid plumbing along frame and air tank
• Use with J844D Nylon Air Brake Tube
• D.O.T. RECOGNIZED FOR ALL AIR BRAKE APPLICATIONS EXCEPT THOSE FOR USE BETWEEN FRAME AND AXLE OR BETWEEN TOWED AND TOWING VEHICLES

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: 90° Male Elbow
• Tube OD: 1/4"
• Pipe Thread: 1/4" MPT
• Material: Brass
• Working Temperature: -40°F (-40°C) to 225°F (107°C)
• Weight 0.06 lbs

Fairview CPC1468-8C 1/2 Tube OD x 3/8 MPT Composite D.O.T. Push-To-Connect Male NPT Connector Air Brake Fitting. Fairview's Male Pipe Connectors Feature A Labor Saving Full Flow Design That Requires No Tools

Applications:
• Air Brakes
• Air Tanks
• Air Ride Suspension
• Sliders
• Tire Inflation
• Cab Controls

Product Features:
• Brass Collet
• Buna N O-ring
• Brass Tube Support
• Meets D.O.T. FMVSS 571.106
• Meets SAE J844
• Composite Body – Strong, Lightweight, Compact and Impact Resistant (Polypropylene)
• Plug-in configurations

Compatible Tubing:
• SAE J844 Type A & B nylon tubing

TECHNICAL DATA SHEET

Specifications:
• Fitting Type: Push-To-Connect
• Fitting Style: Male NPT Connector
• Tube OD: 1/2"
• Pipe Thread: 3/8" MPT
• Temperature Range (Using Low temp Buna O-ring): -67°F (-55°C) to 248°F (120°C)
• Weight 0.09 lbs

Accutek® S1016-E Steel 90° Street Elbow 3/4 Male Pipe x 3/4 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 2,500 PSI
• Burst Pressure: 10,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.75 lbs

Accutek® S1006-C Steel Male Branch Tee 3/8 Female Pipe x 3/8 Female Pipe x 3/8 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 4,000 PSI
• Burst Pressure: 16,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.26 lbs

Fairview GAS-FLO™ 2000 Dual Tank Manifold Tee 1/4 Inv Flare Inlets x 1/4 MPT Outlet. Fairview's Dual Tank Manifold Tee is ideal for adding a secondary Propane tank to a gas system

Specifications:
• Inlets (2): 1/4 Inverted Flare
• Outlet: 1/4 MPT
• Material: Brass
• TO BE INSTALLED BY LICENSED GAS FITTERS ONLY
• Weight: 2.2 oz

Fairview 103CV-D 1/2" Female Pipe Forged Brass Coupling Style Check Valve

INSTALLATION DATA SHEET

Features:
• 250 P.S.I. non-shock cold water
• Forged brass construction for greater strength
• May be installed horizontally or vertically
• Less than 1 P.S.I. cracking pressure
• Note: This valve is intended for use with air and water only

Specifications:
• Thread: 1/2 Female Pipe
• Max Pressure: 250 PSI
• Body Material: Forged brass
• Working Temperature: -20°F to 100°F
• Weight: 0.26 lbs

Accutek® QD-AGN12-12F 3/4 Nipple x 3/4 Female Pipe Agricultural (Pioneer 4000) Interchange Steel 3,600 PSI Quick Disconnect. Fairview's Agricultural Interchange Couplers Interchange with Pioneer 4000, Safeway S20 and S40 Series

Features:
• High Strength Steel Construction
• Superior "Poppet" style valves
• Nitrile NBR seals with PTFE back-up ring
• Typical applications include agricultural equipment, gravel trucks and dump trucks

Specifications:
• Working Pressure: 3,600 PSI
• Body Size: 3/4
• Female Pipe: 3/4
• Body Material: Steel
• Approx. Weight: 0.42 lbs