Comet Pump

Comet FWS2 5040 S Solid Shaft Pump for Belt or Gear Drive. The FWS2 is the newest addition to comet’s industrial series of pumps

Features:
• Reversible Crankcase for Easy Right or Left Hand Mounting
• Hardened Stainless Steel Piston Guides
• Highly Efficient Stainless Steel Check Valves
• NEW ceramic plungers, thicker wall to help prevent thermal shock
• Solid Ceramic Plungers
• High & Low Pressure Seals: High Quality Buna-Textile Packings
• Additional Anti-Extrusion Ring under the Seal
• Solid Brass Manifold
• Special Forged Brass Oversized Connecting Rods
• Die-Cast, Anodized Aluminum Crankcase
• High Quality Tapered Roller Bearings

Specifications:
• Max. Volume: 5.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Solid Shaft for Belt or Gear Drive
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.18 GHP
• Inlet Port: 1/2" FPT
• Discharge Port: 3/8" FPT
• Replaces Comet # 6411.1200.00
• Weight: 19.6 lb

5 pc Fitting Kit - Bayonet & Twist Style. Includes 4 of the most common styles of bayonet fittings and one 22mm twist connect fitting

Fittings:
• Bosch bayonet style pressure washer fitting
• Lavor bayonet style pressure washer fitting
• KEW / Alto bayonet style pressure washer fitting
• 22mm-14 Twist coupler plug - Briggs Power Products, Brute, Craftsman, Delta, DeVilbiss, Excell, Generac, John Deere, Karcher, Ryobi, Troy-bilt
• Karcher K Series brass bayonet style pressure washer fitting

Specifications:
• Material: Brass
• Inlet: 1/4” Female NPT
• Max Pressure: 2,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 140° F
• Weight: 0.75 lb

Comet Seal Kit, Water BXD-G

Replaces Comet # 5019.0667.00

Comet Oil Seal Kit AWD

Replaces Comet # 5019.0687.00

Comet Water Seal Kit AWD, AWD-K, BWD & BWD-K

Replaces Comet # 5019.0686.00

Comet Check Valve Kit

AWD-K 3030G, AWD-K 3530G, AWD-K 4030G, AWD-K 4036G

BWD-K 2527G, BWD-K 3027G

ZWD-K 3538G, ZWD-K 4042G, ZWD-K 4042S

Replaces 5025.0049.00 & 5025.0030.00

OiL Cap BXD, Replaces # 3200.0086.00 & 3200.0122.00

Comet Premium TWS 5550S Series Triplex Plunger Pump. This solid shaft 24mm pump is designed for Belt Drive, Gearbox or Flex Couplers

Features
• Crankcase: Die-Cast Aluminum Alloy for Protection Against Corrosion
• Piston Guides are Heat Treated Stainless Steel
• Highly Efficient Stainless Steel Check Valves
• Solid Ceramic Plungers
• Brass Manifold: Forged for Maximum Strength and Longer LifeI
• Solid Bronze Alloy Connection Rods
• Oil Cap: New Travel/Working Oil Cap
• High Quality Tapered Roller Bearings
• Large Oil Capacity Dissipates Heat and Improves Lubrication for Longer Life
• Long life seals

Specifications
• Max. Volume: 5.6 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Inlet Ports: 1/2" FPT
• Outlet Ports: 3/8" FPT
• Replaces Comet # 6514.0100.00
• Weight: 45.0 lb.

Comet BWD-K 3027G, BWD 3027 G-K Commercial Duty triplex plunger pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Double Seal Packings (High & Low)
• Anodized Crankcase
• Ceramic Plungers
• Forged Brass Manifold
• Stainless Steel Check Valves
• 1/2” FPT Inlet – 3/8” MPT Outlet
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,700 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 7.36 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• ReplacesComet # 6521.0350.00 & 6521.0356.00
• Weight: 13.1 lb.

• Triplex Plunger Pump
• Replaces Comet ZWD3030G-K Pump
• Direct Drive with Gas Flange 7.5-11.0 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Built-In adjustable unloader with chemical injector
• Replaces Comet # 6305.1650.00.
• Weight: 17.4 lb.

Comet BXD 3020G, BXD3020G Commercial-Duty Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.8 GPM
• Max. Discharge Pressure: 2,000 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 5.1 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Replaces Comet # 6525.1004.00
• Weight: 11.0 lb.

REGULATOR VALVE ASSY. Replaces 1215.0586.00, 1215.0393.00, 1215.0403.00

Specifications:
• Works on most 1" solid shaft engines with a 1/4" keyway
• 1/4" W x 1-5/16" L
• Key may have to be cut to length

Twist Coupler Plug, 3/8" MPT x M22-14MM M

Features:
• Precision machined

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass
• Inlet: 3/8” MPT
• Outlet: Male M22-14MM M

Twist Coupler Socket, 3/8" FPT x M22-14MM F Brass 4,000 PSI.

Features:
• Secure twist connection
• Precision machined
• High-Impact plastic Knob
• Internal o-ring seal

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass & Zinc plated steel
• Outlet: Female M22-14MM F
• Inlet: 3/8” FPT

Twist Coupler Plug, 3/8" FPT x M22-14MM M

Features:
• Precision machined

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass
• Inlet: 3/8” FPT
• Outlet: Male M22-14MM M

Twist Coupler Plug 1/4" MPT x M22-14MM M

Features:
• Precision machined

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass
• Inlet: 1/4” MPT
• Outlet: Male M22-14MM M

Twist Coupler Plug, 1/4" FPT x M22-14MM M

Features:
• Precision machined

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass
• Inlet: 1/4” FPT
• Outlet: Male M22-14MM M

Comet Pump Clear View Inlet Water Filter with Garden Hose Inlet and Dual 1/4” Return Ports. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.

Features
• Inlet: 3/4" Female GHT
• Outlet: 1/2" MPT
• Return Port: 1/4" FPT
• Max Temperature: 175° F
• Max Flow: 8.0 GPM
• Replaces: 85.300.055 & AR3600
• Weight: 0.50 Lbs

Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Comet Pump Aluminum Water Inlet Filter with Garden Hose Inlet. The line strainer or filter was designed to remove debris and sediment from the water supply entering the pump. It will prolong the life of a high pressure pump to use a line strainer for any water supply.

Features
• Aluminum housing with removable plastic cap for easy cleaning
• 50 Mesh cuffed filter
• Stainless steel GHT tension spring on garden hose adapter

Specifications
• Max Pressure: 170 PSI
• Max Flow: 10.0 GPM
• Aluminum body
• Inlet: Female garden hose (FGH)
• Outlet: 1/2" Male
• Side Ports (2): 1/4" Female
• Replaces: 85.300.058 & AR3000-A2G
• Weight: 0.60 Lbs

SEAL KIT OIL SOLID SHAFT FW

Replace Comet # 5019.0066.00

PACKING RETAINER KIT, AXD

Replace Comet # 5019.0081.00

Comet Water Seal Kit AXD (3,000 PSI)

Replace Comet # 5019.0050.00 & 5019.0086.00

Comet Unloader Rebuild Kit AXD

Replaces Comet # 5026.0143.00

Comet Viton Water Seals 15mm LW, ZW

Replace Comet # 5019.0051.00

Comet Viton Water Seals 18mm LW

Replace Comet # 5019.0050.00

Comet Piston Seal Kit 15mm LW (2500 PSI)

Replace Comet # 5019.0035.00

Comet Piston Seal Kit 18mm FW, HW

Replace Comet # 5019.0038.00

Comet Piston Seal Kit 18mm LW

Replace Comet # 5019.0036.00

Comet Piston Seal Kit 18mm LW (2500 PSI)

Replace Comet # 5019.0037.00

Comet Piston Kit 18mm LW
Replaces Comet Kit # 2409.0072.00

Comet Piston Kit 3000 PSI Only AXD

Replaces 2409.0103.00

Comet Piston Kit, AXD

Replaces 2409.0092.00

Comet Packing Kit 18mm TW

Replaces Comet # 5019.0653.00

• Comet Piston Kit 15mm LW, ZWD
• Not for ZWD-K MODELS 3538G, 4042G, 4042S
• Replaces Comet Kit # 2409.0071.00

Comet Piston Kit 18mm FW, HW
• Replaces Comet Kit # 2409.0073.00

Comet Oil Seal Kit FWS Hollow Shaft

Replace Comet # 5019.0043.00

Comet Oil Seal Kit HW, HWS Solid Shaft

Replaces Comet # 5019.0044.00

Comet Oil Seal Kit LW Hollow Shaft

Replace Comet # 5019.0041.00

Comet Oil Seal Kit LW Solid Shaft

Replace Comet # 5019.0040.00

Comet Oil Seal Kit SW

Replaces Comet Kit # 5019.0650.00

Comet Mounting Rail Kit FW, HW

Comet Oil Seal Kit FW, HWD Hollow Shaft

Replace Comet # 5019.0045.00

Comet Hot Water Seals 15mm LW, ZW

Replace Comet # 5019.0048.00

Comet Hot Water Seals 18mm FW, HW

Replace Comet # 5019.0053.00

Comet Hot Water Seals 18mm LW

Replace Comet # 5019.0049.00

VALVE ASSBLY

Replaces 1220.0030.00

Comet Pump Suct/Del Valve Assy)

Replaces 1220.0058.00

REGULATOR VALVE KIT

Replaces 1215.0342.00

OUTLET M22 AXD

Replace Comet # 3410.0302.00

O'RING 18MM (SEAL KIT)

Replaces 1210.0417.00

INJECTOR BODY KIT 3/8 " NPT

Replace Comet # 3410.0287.00

INJECTOR BODY KIT 3/8" NPT

Replace Comet # 3410.0296.00

INJECTOR BODY KIT M22 X 1,5

Replace Comet # 3410.0289.00

Flange Gas - LW

Replaces 3016.0012.00

Oil Dipstick

Replaces 3200.0051.00

Comet Oil Seal Kit TW (4000 PSI & Up)

Comet 2.1:1 Gear Reducer 1" Shaft

Replace Comet # 5005.0207.00

Adj Inj Kit LW-K

Replace Comet # 3301.0543.00

Twist Coupler Socket, 3/8" MPT x M22-14MM F Brass 4,000 PSI

Features:
• Secure twist connection
• Precision machined
• High-Impact plastic Knob
• Internal o-ring seal

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass & Zinc plated steel
• Outlet: Female M22-14MM F
• Inlet: 3/8” MPT

Twist Coupler Socket, 1/4" FPT x M22-14MM F Brass 4,000 PSI

Features:
• Secure twist connection
• Precision machined
• High-Impact plastic Knob
• Internal o-ring seal

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass 
• Outlet: Female M22-14MM F
• Inlet: 1/4” FPT

Twist Coupler Socket, 1/4" MPT x M22-14MM F Brass 4,000 PSI.

Features:
• Secure twist connection
• Precision machined
• High-Impact plastic Knob
• Internal o-ring seal

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass & Zinc plated steel
• Outlet: Female M22-14MM F 
• Inlet: 1/4” MPT

Comet BXD 3025G, BXD3025G Commercial-Duty Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In adjustable Uniflow unloader and chemical injector
• Max. Volume: 2.8 GPM
• Max. Discharge Pressure: 2,500 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Maximum Horsepower Requirements: 6.4 GHP
• Built-In easy start
• Double sealing system
• Stainless steel plungers
• Stainless steel check valves
• Steel shaft with built-in key
• Easy view oil level sight glass
• Forged brass manifold
• Patent registered ball bearing design
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Auxiliary Port: 3/8" Female
• Replaces Comet # 6525.1005.00
• Weight: 11.0 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 6.5-14.5 HP SAE
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head · Solid ceramic plungers
• Replaces Comet # 6305.1000.00
• Weight: 16.5 lb.

• Triplex Plunger Pump
• Replaces Comet ZWD3030G Pump
• Direct Drive with Gas Flange 6.5-14.5 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 9.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Replaces Comet # 6305.1600.00
• Weight: 16.5 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 6.5-14.5 HP SAE
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 10.8 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Replaces Comet # 6305.1700.00
• Weight: 16.5 lb.

Comet ZWD-K 3535G Pump with Built-In Unloader and Chemical Injector. This 3, 500 PSI & 3.4 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP

Features
• Built-In adjustable unloader with chemical injector
• 1/2” FPT Inlet – 3/8” Outlet
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods

Specifications
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 10.82 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" Male NPT
• Oil capacity: 14 oz
• Replaces Comet # 6305.1750.00
• Weight: 19.5 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 6.5-14.5 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 12.73 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Replaces Comet # 6305.1800.00
• Weight: 16.5 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 7.5-11.0 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 12.73 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Built-In adjustable unloader with chemical injector.
• Replaces Comet # 6305.1850.00
• Weight: 17.4 lb.

Comet AXD 2527G, AXD2527G Commercial Duty Radial-Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,700 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.2 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Auxiliary Port: 3/8" Female
• Forged brass head
• Ceramic plungers
• Replaces Comet # 6501.0025.00
• Weight: 13.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 6.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6301.1201.00
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Replaces Comet # 6303.0701.00
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 4.0-6.5 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Built-In adjustable unloader with chemical injector.
• Replaces Comet # 6303.0754.00
• Weight: 16.5 lb.

Comet AXD 3025G, AXD3025G Commercial Duty Radial-Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,500 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Auxiliary Port: 3/8" Female
• Forged brass head
• Ceramic plungers
• Replaces Comet # 6501.0006.00
• Weight: 12.0 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE
• Max. Volume: 3.5 GPM
• Max. Discharge Pressure: 2,200 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Replaces Comet # 6303.0802.00
• Weight: 13.4 lb.

Comet AXD 2524G-T, AXD2524GT Commercial Duty Radial-Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.4 GPM
• Max. Discharge Pressure: 2,400 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.45 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Auxiliary Port: 3/8" Female
• Forged brass head
• Stainless steel plungers
• Replaces Comet # 6501.0050.00
• Weight: 13.0 lb.

• Triplex Plunger Pump · Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 5.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.

Replaces Comet # 6300.0700.00

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 6.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6301.1400.00
• Weight: 13.4 lb.

Comet AXD 3020G, AXD3020G Commercial Duty Radial-Axial Pump with adjustable unloader & chemical injection

Features:
• Direct Drive with Gas Flange 4-7 HP SAE (2-9/16 center to center)
• Built-In uniflow unloader with chemical injector standard
• Max. Volume: 2.7 GPM
• Max. Discharge Pressure: 2,000 PSI
• Fits most horizontal engines with a 3/4” straight solid shaft with keyway

Specifications:
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.0 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" MPT
• Auxiliary Port: 3/8" Female
• Forged brass head
• Ceramic plungers
• Replaces Comet # 6501.0005.00
• Weight: 13.0 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 3.0-6.5 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Replaces Comet # 6303.0508.00
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 4.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Ports (2): 1/2" NPT
• Discharge Ports (2): 3/8" NPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6303.0509.00
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Direct Drive with Gas Flange 4.0-6.5 HP SAE
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 5.5 GHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head
• Solid ceramic plungers
• Built-In adjustable unloader with chemical injector
• Replaces Comet # 6303.0558.00.
• Weight: 16.5 lb.

• Radial-Axial Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.0 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 4.1 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" NPT
• Forged brass head
• Ceramic plungers
• Built-In uniflow unloader with chemical injector standard
• Replaces Comet # 6501.0013.00.
• Weight: 12.0 lb

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 4.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6301.0601.00
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 3.1 GPM
• Max. Discharge Pressure: 2,000 PSI · Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 4.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Ports (2): 1/2" NPT · Discharge Ports (2): 3/8" NPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6301.0604.00
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Ports (2): 1/2" NPT
• Discharge Ports (2): 3/8" NPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6303.0105.00
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6301.0101.00
• Weight: 13.4 lb.

• Triplex Plunger Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.2 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 145º degrees F.
• Inlet Ports (2): 1/2" NPT
• Discharge Ports (2): 3/8" NPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces Comet # 6301.0102.00
• Weight: 13.4 lb.

• Radial-Axial Pump
• Direct Drive with Electric Flange NEMA 56C
• Max. Volume: 2.5 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 3400 RPM
• Shaft Diameter: 5/8” Hollow
• Max. Horsepower Requirements: 3.5 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (1): 3/4" GH (garden hose)
• Discharge Ports (1): 3/8" NPT
• Forged brass head
• Ceramic plungers
• Built-In uniflow unloader with chemical injector standard.
• Replaces Comet # 6501.0012.00
• Weight: 12.0 lb

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 2.1 GPM
• Max. Discharge Pressure: 2,000 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 3.0 BHP
• Max. Fluid Temp.: 145 degrees F.
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Drive Side: Reversible crankcase for right or left hand mounting
• Forged brass head & valve covers
• Solid ceramic plungers
• Weight: 13.4 lb.

Replaces Comet # 6300.0502.00

VALVE KIT, VRX

Replaces Comet # 5026.0263.00

VALVE KIT, VRX

Replaces Comet # 5026.0264.00

VALVE KIT, VRX 2400+ PSI

Replaces Comet # 5026.0270.00

REGULATOR VALVE KIT, VRX

Replaces Comet # 5026.0269.00

PLUNGER KIT VRX (3 PLUNGERS)

Replaces Comet # 5026.0260.00