Comet Pump

5 pc Fitting Kit - Bayonet & Twist Style. Includes 4 of the most common styles of bayonet fittings and one 22mm twist connect fitting

Fittings:
• Bosch bayonet style pressure washer fitting
• Lavor bayonet style pressure washer fitting
• KEW / Alto bayonet style pressure washer fitting
• 22mm-14 Twist coupler plug - Briggs Power Products, Brute, Craftsman, Delta, DeVilbiss, Excell, Generac, John Deere, Karcher, Ryobi, Troy-bilt
• Karcher K Series brass bayonet style pressure washer fitting

Specifications:
• Material: Brass
• Inlet: 1/4” Female NPT
• Max Pressure: 2,000 PSI
• Max Flow: 8.0 GPM
• Max Temp: 140° F
• Weight: 0.75 lb

Comet ZWD4040G Industrial Duty Pump Fully Plumbed with EZ Start Unloader, Chemical Injector & Thermal Valve. This ZWD 4040G 4,000 PSI & 4.0 GPM pump is designed to direct drive on gasoline 1” Hollow Shaft engines ranging from 9 - 13 HP.

Features
• Reversible Crankshaft for Easy Right or Left Hand Mounting
• Increased Fin Depth Increases Surface Area to Maximize Heat Dissipation
• Stainless Steel Unitized Check Valves
• Heat-Resistant Solid Ceramic Plungers Operating on Lubricated Packings
• Direct Drive Gas Engine Mounting Flange (SAE J609B)
• Reinforced Crankcase for Increased Load Capacity
• Enlarged Crankcase Increases Oil Capacity for Better Lubrication and Lower Operating Temperatures
• One-Piece Industrial-Grade Oversized Bronze Connecting Rods

Specifications
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Inlet Port: 1/2" FPT
• Outlet Port: 3/8" FPT
• Oil capacity: 14 oz

Componets
• VRT3-310 Adjustable easy start pressure unloader
• Clear bowl water Inlet Filter 3/4 FGH
• Adjustable chemical injector with hose & filter
• Thermal relief valve protects pump from overheating
• 3/8” Brass QC socket
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Replaces Comet # 6305.0914.00
• Weight: 23 lb

Comet 4,000 PSI Quick Connect 2.5" Pressure Gauge Kit. It can be easily put in line with the quick connect ends and used to monitor/set/test your pressure washer

Specifications:
• Accurately view pressure for all units up to 4,000 PSI
• Casing: 2-1/2" Diameter
• Window: Acrylic
• Case Material: Stainless steel
• Fill Material: Glycerin (liquid)
• 3/8 Quick connects for easy mounting
• Max. Pressure: 4,000 PSI
• Weight: 0.80 lbs

Kit Components:
• 4,000 PSI 2.5” stainless steel pressure gauge
• 4,000 PSI Brass and stainless steel 3/8” quick disconnect gauge fitting
• Note: Assembly with Teflon tape is required

Specifications:
• Works on most 3/4" horizontal & 7/8" vertical engines with solid shafts and a 3/16" keyway
• 3/16" W x 1-1/2" L
• Key may have to be cut to length

Comet Pump 18” pressure washer zinc plated extension wand with 22mm-14 male twist connect inlet & 1/4” QC socket outlet

Specifications
• Length: 18"
• Pipe: 1/4” Zinc plated steel
• Inlet: 22mm-14 Male twist connect
• Outlet: 1/4" Female Quick Connect Socket
• Max Pressure: 4,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 300° F.
• Weight 0.85 lbs

Comet Pump 12” water broom is used for cleaning vast surfaces quickly, which speeds up cleaning your driveway, deck, sidewalks, and any other surfaces. Using four nozzles, it cleans in forty percent less time than a regular nozzle!

Specifications:
• Size: 12"
• Three: # 1.3 @ 65°
• Casters: 2
• Construction: Aluminum, Steel & Stainless Steel
• Inlet Connection: 1/4 QC Plug
• Max Pressure: 4,000 PSI
• Max Flow: 3.0 GPM
• Weight 2.7 lbs.

Specifications:
• Works on most 1" solid shaft engines with a 1/4" keyway
• 1/4" W x 1-5/16" L
• Key may have to be cut to length

The Comet STATIC 1700 Extra Gold Electric Pressure Washer with TotalStop is a complete wall mountable and portable solution. Featuring an all brass Italian built pump producing 2.2 GPM and 1,300 PSI. This packaged unit includes 65’ rubber hose, hose reel and accessories

Features:
• Manufactured in Italy
• Sturdy structure with tubular frame for wall mounting
• Equipped with a quick wall coupling system with safety lock
• Handy support for housing all the accessories
• Standard hose reel with 65’ rubber delivery hose
• Water inlet with cartridge filter
• Comet electrical pump with three axial pistons arranged horizontally with pump at the bottom and an all-metal construction without any plastic used for the structural components
• Pump with brass head on all models
• EASY-START device
• TotalStop device
• Motor thermal protection

STATIC 1700 in Action with some additional accessories on YouTube

Accessories:
• Accessory rack supplied with the high-pressure cleaner
• GC 251 gun with protection
• Bent lance, with adjustable nozzle
• Bent lance, with rotating nozzle
• Rotating brush
• Hose reel with 65’ rubber high-pressure hose
• Foam lance 1L

Specifications:
• Flow: 2.2 GPM
• Max Pressure: 1,300 PSI
• Motor: 1150V/60 Electric
• Amps: 14
• Max Temp: 145° F.
• Manufacturer's Warranty: 12 months limited parts / No labor
• Shipping Weight: 55.60 lb