Delavan Fluid Power

• Delavan Nylon 5/8" QA X 1/2" HB Straight Fitting w/ O-Ring
• Works with 7800 Series Quick Attach Pumps

• Delavan Nylon 3/4" QA X 1/2" HB Straight Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps

 

• Delavan Nylon 3/4" QA X 3/8" HB Straight Fitting w/ O-Ring
• Works with 5900, 7822FS and FB2 7900 Series Quick Attach Pumps

 

Delavan Repair Kit for 26556-4, pumps with Lip Seals

Specifications:
• Includes one P/N 26545, gasket and two P/N 45005 lip seal assemblies

Delavan Repair Kit for 26556-11, pumps with Face Seals

Specifications:
• includes one P/N 26545, gasket, and one P/N 51387, Face Seals

• Delavan forged steel multi-speed quick coupler
• Use with Delavan 7000 & 8800 series pumps
• Quick couplers provide quick and simple on-off installation
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Forged steel
• 9 Tooth
• Collar: Nylon 12 color-coded
• Note: Not to be used on 5500 roller pumps or turbo-90

• Delavan Pump Screw, 8-32 X 1 3/8 TORX S.S
• 58/59 (5 chamber) and the 7870/7970 (FB2) pumps
• Used to attach the housing and valve plate to the lower assembly
• Qty. 5 needed

• Delavan Motor Screw, 8-32 X 1 7/8 TORX S.S
• 58/59 (5 chamber) and the 7870/7970 (FB2) pumps
• Used to attach the pump head assembly to the motor
• The first screw above the inlet port and every other screw Qty. 5 needed

Delavan WHK-201CA 96” 18 AWG wiring harness with on-off switch, car adapter, molded 2-pin connector. Bagged and bar coded.
Note: Use with 1 and 2 GPM pumps only

Delavan WHK-101SBC 96” 18 AWG wiring harness with on-off switch, two 30-amp battery clips, molded 2-pin connector (screw terminals with crimp connectors included). Bagged and bar coded.
Note: Use with 1 and 2 GPM pumps only

Delavan 26556-11 Turbo 90 PTO-Driven Turbine Pump with Face Seal. PTO-Driven High Capacity T-90 Turbine Pumps for Smooth Operation and Maximum Agitation. Delivering dependable operation and long pump life for applications including high-volume liquid transfer, handling fluid containing suspended materials, and high-volume spraying

Features:
• The Turbo™ 90 is designed to operate directly from a 1,000 RPM PTO shaft without attachments.
• Peak performance at slower rotation means longer life of the seals.
• The Turbo 90 can pump suspended materials without accumulation unlike a conventional turbine pump. This is possible because of Pressure Relief Passages from the seal cavities to the inlet port. The suspension circulates, and therefore is cleaned from the inner cavities.
• It can be used for large quantity liquid transfer, from truck to tanks, for instance. It is well suited to high volume sprayer pumping applications
• The impeller is made of low moisture absorption, corrosion-resist, engineering grade thermoplastic. It has been designed to increase pump life and smooth operation because of less rotation weight.
• Face seals designed for severe service (such as abrasives). Face seals feature hard, wear-resistant phenolic rings pressing against ceramic seats
• Bearings are isolated by drain cavities.
• 1-1/2” inlet and outlet ports permit unrestricted high volume flow.
• Because of the high capacity of the T- 90, sufficient bypass flow is available to maintain maximum agitation.
• Shaft is made of stainless steel and has a 15/16” diameter with 1/4” keyway

Specifications:
• Pump Type: Turbine
• Seals: Face seal
• Max Recommended Pressure: 100 PSIG
• Max Recommended Temperature: 120° F
• Max Recommended PTO Speed: 1,250 RPM
• Shaft Diameter: 15⁄16“ with 1⁄4“ keyway
• Inlet/Outlet Ports: 1-1⁄2“ NPT (female)
• Weight: 25.35 lbs

Delavan 26556-4 Turbo 90 PTO-Driven Turbine Pump with Lip Seal. PTO-Driven High Capacity T-90 Turbine Pumps for Smooth Operation and Maximum Agitation. Delivering dependable operation and long pump life for applications including high-volume liquid transfer, handling fluid containing suspended materials, and high-volume spraying

Features:
• The Turbo™ 90 is designed to operate directly from a 1,000 RPM PTO shaft without attachments.
• Peak performance at slower rotation means longer life of the seals.
• The Turbo 90 can pump suspended materials without accumulation unlike a conventional turbine pump. This is possible because of Pressure Relief Passages from the seal cavities to the inlet port. The suspension circulates, and therefore is cleaned from the inner cavities.
• It can be used for large quantity liquid transfer, from truck to tanks, for instance. It is well suited to high volume sprayer pumping applications
• The impeller is made of low moisture absorption, corrosion-resist, engineering grade thermoplastic. It has been designed to increase pump life and smooth operation because of less rotation weight.
• Bearings are isolated by drain cavities.
• 1-1/2” inlet and outlet ports permit unrestricted high volume flow.
• Because of the high capacity of the T- 90, sufficient bypass flow is available to maintain maximum agitation.
• Shaft is made of stainless steel and has a 15/16” diameter with 1/4” keyway

Specifications:
• Pump Type: Turbine
• Seals: Lip seal
• Max Recommended Pressure: 100 PSIG
• Max Recommended Temperature: 120° F
• Max Recommended PTO Speed: 1,250 RPM
• Shaft Diameter: 15⁄16“ with 1⁄4“ keyway
• Inlet/Outlet Ports: 1-1⁄2“ NPT (female)
• Weight: 25.35 lbs

• Delavan Relay (J58-070) with Heat Shrink Boot
• Works with Delavan PowerFLO , 7870/7970 FB-2 Series Pump

• Delavan Complete Pump Head Assembly
• Works with Delavan 7870 FB2 series pumps with pressure switch
• Threaded head with 1/2" FNPT Ports

• Delavan Complete Pump Head Assembly
• Works with Delavan 5850 series pumps with pressure switch
• Threaded head with 1/2" FNPT Ports

• Delavan Valve Housing Assembly
• Works with Delavan 5800 & 5900 series pumps

• Delavan Lower Housing Assembly
• Works with Delavan 5850 & 5950 series pumps

• Delavan UHA-5800-B Upper Housing Assembly
• Works with Delavan 5850 series pumps with Bypass
• Upper housing with 1/2" FNPT Ports
• Includes bypass valve

• Delavan Upper Housing Assembly
• Works with Delavan 5800 series pumps with pressure switch
• Threaded head with 1/2" FNPT Ports
• Includes pumps head housing and pressure switch

• Delavan UHA-7800-PS Upper Housing Assembly
• Works with Delavan 7870/7871 FB2 & FB3 series pumps with pressure switch
• Upper housing with 1/2" FNPT Ports
• Includes pressure switch & relay

• Delavan 60 - 100 PSI pressure switch assembly
• 7801, 7802, 7811, 7812 & 7822FS series pumps
• 7812 & 7822FS I-Series pumps
• 5800/5900 and 7870/7871//7970/7971 FB2 & FB3 Series Pumpss
• Replaces 7800-PSW

Delavan Pressure Adjustment Instructions

Delavan 7870-111E-SB PowerFLO™ FB2 Series 7.0 GPM 60 PSI Diaphragm Pump with 1/2” FNPT Ports. Bypass Design – Continuous operation.

Features:
• The FB2 pumps are heavy duty 12V, 7 GPM pumps with Santoprene diaphragms and Santoprene valves
• These FB2 5 chamber pumps are smooth running, and can run dry, and self-prime
• The pumps feature popular threaded NPTF ports
• The FB2 pumps are known for one of the highest flow rates in the 12V market
• The FB2 pumps are used in difficult applications such as roof cleaning, and de-icing
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 12 AWG, 12” long
• Max Amps (60 PSI): 17
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene Glass Filled
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Manufacturer Recommendation:
• If you are going to be running continuous use with any bypass model of pump, Delavan also recommends that you purchase a heat sink for the motor

Pump:
• Bypass Design – Continuous operation with internal bypass
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 7.0 GPM
• Max Pressure: 60 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 9.75 lbs

 

Delavan Valve Housing Assembly, 7870/7871/7970/7971 FB2 & FB3 Series Pumps

• Delavan Lower Housing Assembly
• Works with Delavan 7870 & 7970 FB2 series pumps

Delavan 7870-101Y-SB PowerFLO™ FB2 Series 7.0 GPM 100 PSI Diaphragm Pump with 1/2” FNPT Ports. Demand Switch – Operates only when liquid flow is required.

Features:
• The FB2 pumps are heavy duty 12V, 7 GPM pumps with Santoprene diaphragms and Santoprene valves
• These FB2 5 chamber pumps are smooth running, and can run dry, and self-prime
• The pumps feature popular threaded NPTF ports, along with a heavy duty demand system to turn the pump off when not in use, saving pump life and saving energy
• The FB2 pumps are known for one of the highest flow rates in the 12V market
• The FB2 pumps are used in difficult applications such as roof cleaning, and de-icing
• Certified to NSF/ANSI Standard 61 & 372
• Made in the USA
• 100% Factory tested
• 2 Year warranty from date of purchase

Motor:
• Type: 12 VDC permanent magnet, totally enclosed, non-ventilated
• Leads: 12 AWG, 12” long
• Max Amps (100 PSI): 25
• Duty Cycle: See Heat Rise graph

Materials of Construction:
• Motor Shell: Coated Steel
• Housing: Polypropylene Glass Filled
• Valves: Santoprene
• Diaphragm: Santoprene
• Fasteners: Stainless Steel

NSF/ANSI Certified:
• NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
• NSF/ANSI 372 and conforms with the lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act

Pump:
• Demand Switch – Operates only when liquid flow is required
• Type: 5-chamber positive displacement
• Capable of being run dry
• Excellent self-priming capability
• Liquid Temperature: 140° F Max.
• Priming Capabilities: 14’
• Max. Flow: 7.0 GPM
• Pressure Shut-Off: 100 PSI
• Inlet/Outlet Ports: 1/2” FNPT
• Packaging: Small box
• Weight: 9.75 lbs

 

Delavan RollerPRO® 6901C Series 6-roller cast iron pump. Field Serviceable - saving precious time and money when you need to replace the rollers

Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 6-Roller design
• Max. Flow: 19.6 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT female (rear ports)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CCW (standard)
• Housing: Cast Iron
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 9 lbs

• Delavan Complete Pump Head Assembly w/ 3/8” FNPT Ports
• Works with Delavan 7812 series and 7812 I-Series pumps with pressure switch
• Replaces PH-7812-D

 

• Delavan Lower Housing Assembly
• Works with Delavan 7802 & 7812 series pumps
• Includes diaphragm, pistons, cam and bearing
• Note: Does not work with I-Series pumps
• Replaces LHA7863-7F77

 

• Delavan valve housing assembly
• Works with Delavan 7801, 7802, 7811, 7812 & 7822FS series pumps
• Note: Does not work with I-Series pumps
• Includes valve and valve housing, Viton
• Replaces VHA7863-7F77

 

• Delavan Upper Housing Assembly
• Works with Delavan 7811 & 7812 series pumps with pressure switch
• Inlet/Outlet Ports - 3/8” FNPT
• Includes pumps head housing and pressure switch part
• Note: Does not work with I-Series pumps
• Replaces UHA7863-7F77-T

• Delavan RollerPRO® 6900DSS-R Stainless Steel Diamond Series™ 6-roller pump
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard
• Type: 6-Roller design
• Max. Flow: 19.6 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CW
• Housing: Stainless Steel Diamond Series™
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 9 lbs

Delavan 90200 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 6900 series pumps
• For 5/8” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 1.85

 

Delavan RollerPRO® 4900C Series 4-roller cast iron pump. Field Serviceable - saving precious time and money when you need to replace the rollers

Features
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CW (standard)
• Housing: Cast Iron
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 404 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs

Delavan RollerPRO® 6900DSS Stainless Steel Diamond Series™ 6-roller pump. Field Serviceable - saving precious time and money when you need to replace the rollers

Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 6-Roller design
• Max. Flow: 19.6 GPM
• Max Operating Speed: 1,000 RPM
• Max Pressure: 150 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CCW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 3⁄4” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 9 lbs

 

Universal 8 Roller Delavan and Hypro Pump Repair Kit

Specifications:
• Works with both Delavan and Hypro roller pumps
• Note: Does not work with Delavan RollerPRO® series roller pumps
• Ultra Rollers (8): 11/16” Diameter
• Viton Shaft Seals
• O-rings
• Instructions

Universal 7 Roller Delavan and Hypro Pump Repair Kit

Specifications:
• Works with both Delavan and Hypro roller pumps
• Ultra Rollers (7): 11/16” Diameter
• Viton Shaft Seals
• O-rings
• Instructions

Universal 6 Roller Delavan and Hypro Pump Repair Kit

Specifications:
• Works with both Delavan and Hypro roller pumps
• Ultra Rollers (6): 11/16” Diameter
• Viton Shaft Seals
• O-rings
• Instructions

Universal 4 Roller Delavan and Hypro Pump Repair Kit

Specifications:
• Works with both Delavan and Hypro roller pumps
• Ultra Rollers (4): 1/2” Diameter
• Viton Shaft Seals
• O-rings
• Instructions

Delavan RollerPRO® 7 roller repair kit

Specifications:
• Only works with Delavan RollerPRO® series roller pumps
• Ultra Rollers (7): 3/4” Diameter
• Viton Lip Seal
• Shaft Seal
• Seal Ring
• Shaft Key
• Needle Bearing
• Instructions

Delavan RollerPRO® DPK-8900C Series 8-roller cast iron pump kit

Kit includes:
• 1pc #8900C Delavan cast iron 8-roller pump
• 1pc #90300 Aluminum dual speed quick coupler
• 1pc #33680 Torque arm & chain
• Note: Pump kit shown in picture is DPK-6900C
• Weight: 18 lbs

Delavan RollerPRO® DPK-6900DSS Stainless Steel Diamond Series™ 6-roller pump kit

Kit includes:
• 1pc #6900DSS Delavan stainless steel 6-roller pump
• 1pc #90200 Aluminum dual speed quick coupler
• 1pc #33680 Torque arm & chain
• Note: Pump kit shown in picture is DPK-6900C
• Weight: 13 lbs

Delavan RollerPRO® DPK-6900C Series 6-roller cast iron pump kit. This 6 roller pump kit contains a cast iron pump, quick coupler, torque bar and chain to allow you to quickly attach to your PTO shaft.

Kit includes:
• 1pc #6900C Delavan 6-roller cast iron pump
• 1pc #90200 Aluminum dual speed quick coupler
• 1pc #33680 Torque arm & chain
• Weight: 13 lbs

Delavan RollerPRO® 4901SS Stainless Steel Diamond Series™ 4-roller pump. Field Serviceable - saving precious time and money when you need to replace the rollers

Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 1⁄2” hollow shaft
• Rotation: CW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs

 

Delavan RollerPRO® 4 roller repair kit

Specifications:
• Only works with Delavan RollerPRO® series roller pumps
• Ultra Rollers (4): 1/2” Diameter
• Shaft Seals (2)
• Seal Ring
• Shaft Key
• Needle Bearing
• Instructions

Delavan RollerPRO® 4900DSS Stainless Steel Diamond Series™ 4-roller pump. Field Serviceable - saving precious time and money when you need to replace the rollers

Features
• “Roundup Ready,” a Delavan Stainless Steel Diamond Series roller pump lasts ten times longer than a cast iron pump
• Stronger than steel, it’s simply the best chemical-resistant roller pump you can buy
• Delavan RollerPRO® pumps are field serviceable - saving precious time and money when you need to replace the rollers
• Complete roller replacements takes about 3 minutes
• To ensure the best performance for your investment, Delavan incorporates such features as “Ultra” rollers, heavy-duty sealed bearings, viton seal rings, stainless steel shafts and rotors, and close tolerance machining. All are standard

Specifications
• Type: 4-Roller design
• Max. Flow: 9.2 GPM
• Max Operating Speed: 2,600 RPM
• Max Pressure: 100 PSI
• Max Recommended Temperature: 140°F (60° C)
• Port Size: 3/4” NPT (female)
• Base Mounted: 5⁄16 -18 UNC-2B (2 holes)
• PTO: Use torque bar and chain
• Shaft Size: 5⁄8” solid shaft
• Rotation: CW (standard)
• Housing: Stainless Steel Diamond Series™
• Rollers: 1/2” Ultra rollers (standard)
• Shaft Seals: Viton cartridge type lip seals
• Seal Ring: Viton
• Shaft & Rotor: Extra-fine finish 416 SST
• Bearings: Permanently-lubricated, heavy-duty sealed bearings
• Weight: 5 lbs

• Delavan forged steel quick coupler
• Use with Delavan Turbo, 5500 & 8800 series pumps
• Quick couplers provide quick and simple on-off installation
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Single Speed: 1,000 RPM
• Forged steel body
• 21 Tooth
• Collar is durable nylon 12 color-coded

Delavan 90700 forged steel 540 RPM quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Single Speed: 540 RPM
• Body: Forged steel
• Collar: Nylon
• Tooth/Spline: 6
• Weight: 1.90

 

The Torque Bar and Chain is needed to anchor a PTO-mounted pump to keep it from turning with the PTO shaft. Fits all Roller pumps

Delavan 50101-1 set screw coupler. For 5/8” diameter electric motor or gas engine; 5/8” pump shaft; 2600 RPM; mild steel with set screws

Specifications:
• Use with Delavan 4400 series pumps
• For 5/8” Diameter electric motor or gas engine
• Max. Operating Speed: 2,600 RPM
• Mild steel construction
• Weighs 0.60 lbs

 

Delavan 90300 die cast aluminum multi-speed quick coupler. Quick couplers provide quick and simple on-off installation

Specifications
• Use with Delavan 7900 & 8900 series pumps
• For 15/16” Diameter pump shaft
• For 1-3/8” Diameter PTO
• Dual Speed: 540/1,000 RPM
• Body: Corrosion-resistant cast aluminum
• Collar: Nylon
• Tooth/Spline: 9
• Weight: 2.15