General Pump

General Pump D10088 3/8” Brass Quick Disconnect Coupler x M22-14MM F Twist Coupler 4,000 PSI

Features:
• Adapts from quick connect to 22mm twist connect
• Brass
• EPDM O-Ring

Specifications:
• Body Material: Brass
• 3/8" QD Coupler
• Female M22, Yoke/Stem: 14MM
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Replaces 6341
• Weight: 0.40 lb

Set of General Pump D80008 Pressure Washer 2-1/2" x 1" Replacement Rubber Feet. Perfect for pressure washer carts and frames

Specifications
• Includes four replacement feet, 2.5” Diameter x 1.0” Thick
• Mounting hardware not included
• Weight: 1.10 lbs

General Pump D10075 Quick Disconnect Coupler Socket Stainless Steel 3/8” x 3/8" NPT-M 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 3/8"
• Thread: 3/8” NPT-M
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCS2MSS
• Weight: 0.21 lb

General Pump D10074 Quick Disconnect Coupler Socket Stainless Steel 3/8” x 3/8" NPT-F 5,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: 304 Stainless steel
• Socket Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Replaces QCS2FSS
• Weight: 0.21 lb

GP 2103245 Lock Pin Repair Kit for DHRA Hose Reels

Kit Includes:
• 2540085 Bracket, Lock x 1
• 2540086 Pin, Lock x 1
• 2720025 Spring, Lock Pin x 1
• 2200013 Washer, M8, SS x 1
• 2202033 Pin, Cotter, 2x20 x 1

General 100817 High Draw Stainless Steel Adjustable Chemical Injector Acid Repair Kit

Each Kit Contains:
• (1) Spring #720049
• (2) O-ring, 70 Duro, Viton, .208x.070 #701501
• (1) Ball, Injector, Ceramic (Optional) #640065

Injector Specifications:
• Works with High Draw Adjustable Injectors 100861, 100811, 100862 & 100863
• Weight: lbs

General 100804 High Draw Chemical Injector Acid Repair Kit

Each Kit Contains:
• (1) Spring #720049
• (1) O-ring, 70 Duro, Viton, .208x.070 #701501
• (1) Ball, Injector, Ceramic (Optional) #640065

Injector Specifications:
• Works with High Draw Fixed Injectors 100773, 100774, 100775, 100776, 100873, 100874 & 100875
• Works with High Draw Adjustable Injectors 100810, 100811, 100812 & 100813
• Weight: lbs

General Pump 100295 Series 100 Oil, 16 oz. Bottle. General Industrial Oil is a premium multi-purpose lubrication formulated to protect against rust and oxidation. It offers long service life and prevents sludge and varnish formation, even at high temperatures

Features:
• General Industrial Oil possesses a high natural viscosity index. This means more constant operating characteristics over wide temperature range
• Recommended for use in General Pump crankcases on systems requiring less than 25 BHP. Initial oil change after break-in period between 50 and 100 hours. Then every three months of 300 hours of operation thereafter. Check oil level in crankcase daily or before each use.
• Regular lubrication is the easiest, most efficient and least expensive element in preventive maintenance

Specifications:
• Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston and plunger pumps
• Resists foaming and aeration
• Highly resistant to oxidation that would result in sludge formation
• Resistas formation of harmful oil water emulsions
• Compatible with typically used seals and gaskets
• High viscosity index (IV) means more constant operating characteristics over wide temperature ranges
• Low pour point assures fluid flow during cold weather operation
• Outstanding thermal and hydrolytic stability assures long oil life
• Exceeds wear prevention requirements of all major hydraulic pump manufactures
• Packaged in one 16 oz bottle
• Weight: 1 lbs

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 145º F.
• Brass body
• Inlet thread size: 1/2" MPT
• 1/4” Hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 145º F.
• Brass body
• Inlet thread size: 1/4" MPT
• 1/4” Hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz

Specifications:
• Compact Design - Shorter overall length
• Trip Temperature: 145º F.
• Brass body
• Inlet thread size: 3/8" MPT
• 1/4” Hose barb
• Mounts easily in the pump manifold,inlet water supply or bypass loop plumbing
• Weight: 1.5 oz