General Pump

General HF25A 4,050 PSI 19.6 GPM Triplex Plunger Pump. A “New Generation” Pump

Features:
• A “New Generation” Pump
• Triplex Plunger Pump, available in 4 flows
• Patent-pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion
• Low-high pressure packing design with integrated cooling system
• • High volumetric efficiency suction/delivery valves featuring new spherical design of sealing areas
• Splash lubrication
• SAE-C hydraulic drive bell housing and flexible couplers available
• Available with external gear box (direct drive only)
• Optional pulsing capability using F10744201 lifting valve (not included)

Specifications Sheet

Materials:
• High resistance light alloy die cast crankcase
• 420 Stainless steel manifold, nickel treated
• Taper roller bearings
• Special anti-friction, forged, light alloy connecting rods
• Forged alloy steel crankshaft, hardened, tempered and nitrited
• Cast iron piston guide, nickel treated
• Solid ceramic plungers
• Stainless steel valves

Specifications:
• Maximum Inlet Pressure:. 45 PSI
• Maximum Fluid Temperature:. *140° F
• Inlet Port Thread:. 1” NPT-F
• Discharge Port Thread:. 3/4” NPT-F
• Shaft Diameter:. 1.575”/40 mm
• Stroke:. 1.969”/50 mm
• Pump Dimensions: . 20” x 14.5” x 9.4”
• Crankcase Oil Capacity:. 128.5 oz. (3.8 liters, use GP Series 220 Oil
• Ship via truck
• Weight: 132 lbs./60 kg

General KE28HA Stainless Steel 2, 170 PSI 16.1 GPM Triplex Plunger Pump. A “New Generation” Pump

Features:
• Patent-pending, symmetrical power end design featuring top and bottom mounting holes allowing for easy left to right shaft conversion
• Low-high pressure packing design with integrated cooling system
• High volumetric efficiency suction/delivery valves featuring new spherical design of sealing areas
• Splash lubrication

Materials:
• High resistance light alloy die cast aluminum crankcase
• 420 Stainless steel manifold, nickel treated
• Taper roller bearings
• Special antifriction, forged, light alloy connecting rods
• Forged alloy steel crankshaft, hardened, tempered and nitrited
• Cast iron piston guide, nickel treated
• Solid ceramic plungers
• Stainless steel valves
• Pumps are also available with 316 SS packing components. These models use prefix “KEN”

Specifications:
• Maximum Inlet Pressure: 45 PSI
• Max. GPM: 16.1
• Max. PSI: 2,170
• Max. Fluid Temp.: 140° F.
• Inlet Port Thread: 1” NPT-F
• Discharge Port Thread: 1/2” NPT-F
• Shaft Diameter: 1.181”/30 mm
• Pump Dimensions: 15.2” x 13.4” x 7.7”
• Shipping Weight: 88.0 lb.

General Pump New Manifold Only MW/MWR

General T1631 Sixplex Plunger Pump.

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Hi flow applications
• Dual manifolds utilizing a common crankcase for efficient performance
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Pump: Sixplex Plunger
• Max. Volume: 10.0 GPM
• Max. Discharge Pressure: 2,500 PSI
• Max. Pump Speed: 1,080 RPM
• Shaft Diameter: 32mm Solid
• Max. Horsepower Requirements: 17.1 EBHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 3/4” BSP-F
• Discharge Ports (2): 3/8” BSP-F
• Maximum Inlet Pressure: 125 PSI
• Maximum Inlet Vacuum: 9 ft. water (7.9 in. Hg)
• Oil Capacity: 54.0 oz.
• Dimensions: 16.1” x 11.2” x 7.9”
• Weight: 61.0 lb.

General TSP1621 High Pressure Triplex Plunger Pump 6,525 PSI 4.3 GPM 1,450 RPM

Features:
• Compact, High Pressure
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves “thermal shock” resistance
• New valve cap design improves hydrostatic performance

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.3 GPM
• Max. PSI: 6,525
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 19.2 EBHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2” BSP-F
• Discharge Ports (2): 3/8” BSP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 51.8 lb.

General TSP1619 High Pressure Triplex Plunger Pump 7,250 PSI 3.6 GPM 1,450 RPM / 5,800 PSI 4.3 GPM 1,750 RPM

Features:
• Compact, High Pressure
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves “thermal shock” resistance
• New valve cap design improves hydrostatic performance

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.6 / 4.3 GPM
• Max. PSI: 7,250 / 5,800
• Max. Pump Speed: 1,450 / 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 17.8 EBHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2” BSP-F
• Discharge Ports (2): 3/8” BSP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 51.8 lb.

• General 66 Series Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.8 EHP
• Max. Fluid Temp.: 165° F
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Forged brass head has an exclusive lifetime warranty
• Plunger design improves thermal shock resistance
• Drive Side: Left
• Weight: 52.0 lb.

General PMRTSF2021 Pump Made Ready 66 Series High Flow Triplex Plunger Pump. Pump is ready to use right out of the box

Features:
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves thermal shock resistance
• New valve cap improves hydrostatic performance

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Discharge Pressure: 3,600 PSI
• Max. Volume: 7.0 GPM @ 1,450 RPM
• Max. Volume: 8.5 GPM @ 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements (EBHP): 17.3 @ 7.0 GPM/21.0 @ 8.5 GPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 33.8oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 3/4"-14 BSP-F
• Discharge Ports (2): 3/8-19 BSP-F

COMPONENTS:
• General TSF2021 Triplex Plunger Pump
• ZH284K Unloader, 4060 PSI, 10 GPM
• High pressure safety relief valve
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting rails included
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 46 lb

General Inlet Valve Kit

• General 66 Series Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.8 EHP
• Max. Fluid Temp.: 165° F
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Forged brass head has an exclusive lifetime warranty
• Plunger design improves thermal shock resistance
• Drive Side: Standard right
• Weight: 52.0 lb.

General Outlet Valve Kit

General Plunger Packing Kit (for MWSR50A)

General Complete Soft Parts Kits

General TSF2221 66 Series High Flow Triplex Plunger Pump

Features:
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves thermal shock resistance
• New valve cap improves hydrostatic performance

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Discharge Pressure: 3,000 PSI
• Max. Volume: 8.5 GPM @ 1,450 RPM
• Max. Volume: 10.2 GPM @ 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements (EBHP): 17.5 @ 8.5 GPM/21.0 @ 10.2 GPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 33.8oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 3/4"-14 BSP-F
• Discharge Ports (2): 3/8-19 BSP-F
• Drive Side: Standard right
• Dimensions: 14.94" x 9.78" x 6.99"
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 40.7 lb.

General TSF2021 66 Series High Flow Triplex Plunger Pump

Features:
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves thermal shock resistance
• New valve cap improves hydrostatic performance

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Discharge Pressure: 3,600 PSI
• Max. Volume: 7.0 GPM @ 1,450 RPM
• Max. Volume: 8.5 GPM @ 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements (EBHP): 17.3 @ 7.0 GPM/21.0 @ 8.5 GPM
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 3.8oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 3/4"-14 BSP-F
• Discharge Ports (2): 3/8-19 BSP-F
• Drive Side: Standard right
• Dimensions: 14.94" x 9.78" x 6.99"
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 40.7 lb.

General T9281 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Nickel plated forged brass manifold
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 EBHP
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 37.2oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 33.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,000 PSI
• Max. Pump Speed: 1750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel plated brass head & valve covers
• Solid ceramic plungers
• Weight: 33.0 lb.

• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Nickel plated brass head & valve covers
• Solid ceramic plungers
• Weight: 33.0 lb.

General EPHT18132S Triplex EPHT Series 1,750 RPM Solid Shaft Plunger Pump with High-temp Seals.

Features:
• Features patented “high tech” packings:
    -dynamic low-pressure seal retainer
    -superior low-pressure seal
    -innovative intermediate ring
    -superior high-pressure seal
• Nickel-plated manifold
• New forged brass manifold , increases working pressure to 4,000 PSI
• New plunger guide bushing (patent pending)
• Solid ceramic plungers with dual guide system
• New dual diameter plunger guide
• New optimized outlet valves
• New dual lip oil seal

Specifications Sheet

Specifications:
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 2,465 PSI
• Horsepower: 5.7 EBHP
• Max. Pump Speed: 1,750 RPM
• Oil Capacity: 14 oz
• Max. Fluid Temp.: 185 degrees F.
• Inlet Port Thread: 1/2”-14 BSP-F
• Discharge Port Thread: 3/8”-19 BSP-F
• Shaft Diameter: .945 in./24 mm
• Dimensions – Nominal: 9.5” x 8.38” x 5.1”
• Rail kit part # ZFEETEVO
• Replaces HTXS1813S
• Weight: 18.0 lb.

General Pump DHRA50450SS 3/8" x 450', 3/4" x 250' Stainless Steel "A" Frame Industrial Hose Reel. Rated 5,000 PSI and up to 250° F. Ideal for use with pressure washers, sewer jetters, lawn & tree sprayers, etc. Can be used as is or can be mounted to portable cart or stacked

FEATURES
• Direct hand-crank rewind with locking pin and folding mechanism
• Heavy duty stainless steel construction
• Full flow stainless steel swivel
• Variable friction brake
• Many available accessories
• Includes one D10032 Fitting 3/4” GH X 1/2 NPT-M

DHRA SS Spec Sheet

SPECIFICATIONS
• Capacity 3/8" Pressure Washer / Sewer Hose: 450’
• Capacity 5/8" Garden Hose: 325’
• Capacity 3/4" Garden Hose: 250’
• Max. PSI: 5,000
• Max Temp: 250° F.
• Inlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Outlet: 1/2 NPT-F (Bushing Included, 1/2 NPT-M x 3/8 NPT-F)
• Note: Unit pictured is model DHRA50150SS
• Gross Weight 48.0 lbs