General Pump

PA FL 12 / General Pump YFL12 4,500 PSI 26.4 GPM Flow Switch with 3/4" NPT-F inlet

Features
• Electro-mechanical device in which the fluid passage moves a magnetized piston that opens an electric circuit. DN 20
• Magnetic drive obtained by the plunging piston movement
• Electrical insulation: class IP55
• Magnetic probe casing made of antiflame material

Specifications
• Rated Pressure: 4,000 PSI
• Permissible Pressure: 4,500 PSI
• Max Flow Rate: 26.4 GPM
• Activation Flow Rate: Horizontal: 2.0 GPM
• Activation Flow Rate: Vertical: 3.3 GPM
• Max Working Temp: 165° F
• Max. Voltage: 230 V
• Max. Curr. Strength: 3 A
• Cable Length: 49.2" (1250 mm)
• Electrical insulation: 55 IP - 0
• Materials: Brass, Stainless Steel, Buna-N, Plastic
• Inlet: 3/4" NPT-F
• Outlet: 3/4" NPT-F
• Weight: 34.4 oz.

General Pump YVB35KDME Direct-Mount, Control Set Unloader Used with ET, EP & ES Series Pumps

Featuring:
• Direct-mount, control set unloader
• Used with ET, EP and ES Series pumps
• Built-in bypass
• Sturdy steel and brass construction
• Adjustable locknut to control the maximum pressure
• Plastic adjustment knob (not pictured)

Specifications:
• Rated Pressure: 3,200 PSI
• Minimum Adjustable Pressure: 319 PSI
• Maximum Discharge Pressure: 3.650 PSI
• Rated Volume: 6.5 GPM
• Pressure Drop to Reset Bypass: 19%
• Max. Fluid Temp.: 195° F.
• Inlet Port: 1/2” BSP-F
• Outlet Port: 3/8” BSP-M
• Materials: Brass, Stainless Steel, Buna-N
• Overall Dimensions: 5.9” x 3.0” x 1.75”
• Weight: 1.8 lbs

General Pump ZGRS1000 Gear Reducer for 2.2 to 1, 1″ Shafted Engines, Up to 25 HP, J609A Flange, 47 and 66 Series pumps

Features:
• Eliminates need for belts and pulleys. Saves time and money
• Compact design for easier enclosure. Reduced size of mounting base
• Oversized bearing system is self-aligning. Reduces load on motor bearings and pump bearings
• Self-contained lubrication system Uses 90W gear lube for quiet, long life operation. Protects pump from failure due to gearbox oil loss. Protects gearbox from failure due to oil loss in pump
• Large, helical cut, hardened steel gears for quiet, long life operation
• Large capacity crankcase
• Reversible mounting for right or left hand drive gas engines. Includes reversible dipstick and oil level sight glass
• Model ZGRS1000 for a 1” keyed shaft

Specifications:
• Maximum BHP (Engine HP): 25
• Maximum Engine RPM: 3,600
• Reduction Ratio: 1:2.2
• Maximum Pump Speed: 1,450 RPM
• Oil Capacity (SP Industrial Pump Oil Series 220): 9.47 Oz
• Fits Engine Shaft Diameter: 1”
• Fits General Pump Models: 47 Series (1450 RPM Versions) 66 Series (1450 RPM Versions)
• Weight: 9.26 lb.

General Pump ZFWWU Flange For NEMA-C Electric Motors 56C Frame (TT/TP Series 51 Pumps)

Specifications:
• Material: Heavy-duty cast aluminum
• Pump Series: TT/TP 51 Series
• Motor Frame: NEMA-C Electric 56C
• Motor Rating: 3-1/2 to 8 HP
• Weight: lb.

General Pump 2100472GH Low Pressure In-line Water Filter 3/4 FGH x 1/2” NTP-M with 1/4" Bypass Ports

Features
• Low-pressure in-line filter
• Rigid construction
• Stainless Steel mesh filter
• Die cast aluminum (anodized) housing and plastic cap
• No tools required for cleaning
• Ports for bypass hose and gauge
• Brass garden hose fitting (2100472GH)

Specifications
• Max Volume: 8.0 GPM
• Maximum Pressure: 145 PSI
• Temperature: 176° F
• Filter: 50 Mesh
• Inlet: Female garden hose (FGH)
• Outlet: 1/2” NPT-M
• Bypass Ports: 1/4” F
• Materials: Aluminum, Brass, Plastic, Buna-N
• Weight: 0.30 Lbs

General Pump 2100472 Low Pressure In-line Water Filter 1/2” NTP-F x 1/2” NTP-M with 1/4" Bypass Ports

Features
• Low-pressure in-line filter
• Rigid construction
• Stainless Steel mesh filter
• Die cast aluminum (anodized) housing and plastic cap
• No tools required for cleaning
• Ports for bypass hose and gauge

Specifications
• Max Volume: 8.0 GPM
• Maximum Pressure: 145 PSI
• Temperature: 176° F
• Filter: 50 Mesh
• Inlet: 1/2” NTP-F
• Outlet: 1/2” NPT-M
• Bypass Ports: 1/4” F
• Materials: Aluminum, Brass, Plastic, Buna-N
• Weight: 0.30 Lbs

General Pump DHR50100 3/8" x 100' Industrial Hose Reel with Mounting Base. Rated 5,000 PSI and up to 300° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use. Quickly and easily mounts to most vertical and horizontal surfaces

FEATURES
• Direct hand-crank rewind
• Includes drum locking pin
• Solid steel construction
• Durable black powder coated finish
• 5,000 PSI rated swivel with forged brass hose mounting arm
• Hardware provided for mounting to cart handle or bumper

Specifications Sheet

SPECIFICATIONS
• Capacity: 100’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 5,000
• Max Temp: 300° F.
• Color: Black
• Inlet: 3/8 NPT-M
• Outlet: 3/8 NPT-F
• Carton Dimensions: 14.5” x 18” x 15.6”
• Replaces DHR50100D
• Weight 18.85 lbs

General Pump 101146 Stainless Steel Turbo Nozzle Inline High-Pressure Filter 5,000 PSI 40 GPM 1/2" NPT-F x 1/2" NPT-M. Keeps debris out of nozzle and extends nozzle life

Features
• 100 mesh, stainless steel mesh screen is standard
• 60 mesh, stainless steel mesh screen is optional (Part No. 640055)
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long-lasting materials
• MADE IN USA

Specifications
• Max Pressure: 5,000 PSI
• Max Volume: 40 GPM
• Max Temp: 200° F.
• Inlet: 1/2" NPT-F
• Outlet: 1/2" NPT-M
• Material: Stainless Steel, Buna-N
• Dimensions: 3.5" x 1.25"
• Weight: 0.70 lb

General Pump 2100531 Wall Mount Kit For D3000 & DHR Hose Reels

FEATURES
• Easily and safely mount your hose reel to the wall
• Powder coated all steel construction for durability, strength and lasting protection
• Includes mounting hardware and (4) 3” lag screws

SPECIFICATIONS
• Works with Hose Reel Models: D3000 and DHR
• Color: Black
• Box Weight 6.70 lbs

General Pump YYSTR12 Brass Y-Strainer 1/2" NPT-F 50 Mesh

Specifications
• Maximum Temperature: 194° F
• Maximum Pressure: 170 PSI
• Screen Mesh Size: 50 Mesh (300 Micron)
• Materials: Brass, Stainless Steel
• Port Sixes: 1/2” NPT-F
• Dimensions: 2.9” x 2.2” x 1.2”
• Weight: 0.30 Lbs

General Pump 100728 6,000 PSI Safety Relief Valve 1/4” MPT-N. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: End
• Max Temperature: 32 - 150° F
• Inlet: 1/4" NPT-M
• Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 100724 6,000 PSI Safety Relief Valve 1/4” MPT-N with 1/4” Hose Barb. This safety relief valve is a manually adjustable pressure-operated device which, according to its setting releases the excess of water when the pressure inside the pump/system exceeds the adjusted value, thus reducing the pressure. The normal working conditions can be restored by turning off and then restarting the system

Features:
• High pressure safety valve: 2,500 – 6,000 PSI relief pressure
• One model fits all pressures - no springs to change
• Less “whistling” and chatter than competing brands
• Highly accurate over full range of pressures
• Fits any brand of pump
• Designed and made in the USA

Specifications:
• Adjustable Range: 2,500 - 6,000 PSI
• Max Volume: 6 GPM
• Discharge: Side
• Hose Barb: 1/4”
• Max Temperature: 32 - 150° F
• Inlet: 1/4" NPT-M
• Body Dimensions: 2.6” x .875” Hex
• Weight: 0.325 lbs

General Pump 15° x #2.0 S-Style Spray Nozzle 1/8” NPT-M

Features
• 5,000 PSI operating pressure
• Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Laser marked for clarity and durability

Specifications
• Tip Angle: 15°
• Nozzle Size: 2.0
• Operating Pressure: 5,000 PSI
• Connection: 1/8” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 15° x #2.5 S-Style Spray Nozzle 1/8” NPT-M

Features
• 5,000 PSI operating pressure
• Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Laser marked for clarity and durability

Specifications
• Tip Angle: 15°
• Nozzle Size: 2.5
• Operating Pressure: 5,000 PSI
• Connection: 1/8” NPT-M
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart