General Pump

General Pump D10062 Quick Disconnect Coupler Easy-Grip Socket Nickel Plated Brass 1/4” x 1/4" NPT-M 5,000 PSI

Features:
• Offers protection when the coupler is hot and a steady grip that won't slip easily
• Quick disconnect design
• Nickel plated brass for durability
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 1/4"
• Thread: 1/4” NPT-M
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Weight: 0.20 lb

General Pump D10063 Quick Disconnect Coupler Easy-Grip Socket Nickel Plated Brass 3/8” x 3/8" NPT-F 4,000 PSI

Features:
• Offers protection when the coupler is hot and a steady grip that won't slip easily
• Quick disconnect design
• Nickel plated brass for durability
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Weight: 0.20 lb

General Pump D10064 Quick Disconnect Coupler Easy-Grip Socket Nickel Plated Brass 3/8” x 3/8" NPT-M 4,000 PSI

Features:
• Offers protection when the coupler is hot and a steady grip that won't slip easily
• Quick disconnect design
• Nickel plated brass for durability
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 3/8"
• Thread: 3/8” NPT-M
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Weight: 0.25 lb

General Pump #1.8mm Adjustable Chemical Injector, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.1mm Adjustable Chemical Injector, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump #2.3mm Adjustable Chemical Injector, High Draw, Chemical Draw Up To 20% with 3/8" NPT-M. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Features
• Up tp a 20% injection draw rate
• Made in the USA
• A cost effective solution to your chemical application needs

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Max Operating Pressure: 4,500 PSI
• Max Temperature: 195° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-M
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.30 lbs

General Pump D10003 Quick Disconnect Coupler Socket Brass 3/8” x 3/8" NPT-F 4,000 PSI

Features:
• Quick disconnect design
• Brass
• EPDM O-Ring

Specifications:
• Quick Disconnect Coupler: Socket
• Body Material: Brass
• Socket Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 4,000 PSI
• Replaces QCS2FB
• Weight: 0.20 lb

General Pump D30002 3/8" x 100' Steel Hose Reel with Mounting Base. Rated 4,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use. Quickly and easily mounts to most vertical and horizontal surfaces

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable black powder coated finish
• Brass swivel with Stainless Steel internal stem
• Hardware provided for mounting to cart handle or bumper

SPECIFICATIONS
• Capacity: 100’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 4,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-F
• Outlet: 3/8 NPT-F
• Dimensions: 14.4” L x 10.5” W x 12.8” H
• Weight 11.75 lbs

1/4” General Pump # 3.0 “Multi-Nozzle” Type Sewer Nozzle 1 Front 6 Rear 5,000 PSI.

Features
• “Multi-Nozzle” nozzles combine the features of “Penetrator” and “Flushing” nozzles
• A single forward nozzle penetrates clogs and debris
• 6 rear facing nozzles advance hose through pipe
• Dual angle rear facing nozzles (3 x 25°) and (3 x 45°) combine forward thrust and pipe wall cleaning
• Excellent for cutting through roots, dirt and debris
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 3.0
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 3.0 “Penetrator” Type Sewer Nozzle 1 Front 3 Rear 5,000 PSI.

Features
• “Penetrator” nozzles blast forward with one nozzle to break up debris and clogs
• 3 Rear (25°) facing nozzles advance hose through pipe
• Excellent for cutting through roots, dirt and debris
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 3.0
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” General Pump # 3.0 “Flusher” Type Sewer Nozzle 0 Front 3 Rear 5,000 PSI.

Features
• “Flusher” nozzles expel loose debris as hose travels through pipe
• 3 Rear (25°) facing nozzles advance hose through pipe
• High pressure nozzles are sized to match the flow and pressure specifications of the equipment
• Heat-treated Stainless Steel nozzles are wear and corrosion resistant
• Great for pipe, sewer and drain cleaning
• Compact design allows for maneuverability and cornering within pipes
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 3.0
• Material: Stainless steel
• Maximum Pressure: 5,000 PSI
• Inlet: 1/4" NPT-F
• Outside Diameter (O.D.): .63”
• Weight: .05 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump D10078 Quick Disconnect Coupler Plug Stainless Steel 3/8” x 3/8" NPT-F 6,000 PSI

Features:
• Quick disconnect design
• 304 Stainless steel

Specifications:
• Quick Disconnect Coupler: Plug
• Body Material: 304 Stainless steel
• Plug Size: 3/8"
• Thread: 3/8” NPT-F
• Max Temp: 175°
• Max Operating Pressure: 6,000 PSI
• Replaces QCP2FSS
• Weight: 0.09 lb

General Pump 6.5” Industrial Duct Cleaner 8.0 GPM. 4,000 PSI 1/4" NPT-F

Features:
• Heavy-duty industrial duct cleaner
• Fully assembled, connects to high pressure hose or lance
• Heavy-duty bearings (can be greased)
• Repair kits available
• Designed for cleaning metal ducts

Specifications:
• Diameter: 6.57”
• Height: 6.7”
• Rated Pressure: 1,500 PSI
• Max Pressure: 4,000 PSI
• Max Flow: 8.0 GPM
• Nozzles: (2) 25° x 2.0
• Inlet: 1/4" NPT-F
• Weight: 3.5 lbs

General Pump D30006 3/8" x 200' Steel Hose Reel with Mounting Base. Rated 4,000 PSI and up to 185° F. Heavy duty steel frame structure is ideal for pressure washer and sewer jetter use. Quickly and easily mounts to most vertical and horizontal surfaces

FEATURES
• Direct hand-crank rewind with pin lock
• Solid steel construction
• Durable black powder coated finish
• Brass swivel with Stainless Steel internal stem
• Hardware provided for mounting to cart handle or bumper

SPECIFICATIONS
• Capacity: 200’ of 3/8” pressure washer/sewer jetter hose
• Max. PSI: 4,000
• Max Temp: 185° F.
• Color: Black
• Inlet: 3/8 NPT-F
• Outlet: 3/8 NPT-F
• Diimensions: 19.3” L x 13.4” W x 16.3” H
• Weight 15.65 lbs

General TMT Flow Switch. Stainless Steel Tri-Magnet technology in-line flow switch

Features
• Micro-switch technology eliminates reed switch
• Activates with 1.5 GPM flow
• Stainless Steel shuttle
• Minimal pressure drop up to 12 GPM flow
• Can be mounted in any position

Specifications
• Maximum Operating Pressure: 5,000 PSI
• Minimum Flow Required for Activation: 1.5 GPM @ 50 PS
• Maximum Operating Flow: 12.0 GPM
• Operating Temperature Range: 40 - 180 ºF
• Electrical Lead Length: 48” - 18AWG
• Max Switching Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Inlet: 3/8” x 18 NPT-F
• Outlet: 3/8” x 18 NPT-F
• Materials: Stainless Steel, Plastic, Nickel-plated Neodymium
• Weight: 1.0 Lb

General Pump Pivot Coupler 1/4 QC 4,500 PSI 10.0 GPM. Locks In 3 Positions. This General Pump Pivot Coupler locks at 45° in either an up or down position for difficult cleaning angles

Features
• Locks at 45° in up or down position
• Mounts to any 1/4" QC lance
• Brass construction with chrome-plated steel plug

Specifications
• Inlet:1/4” QC plug
• Outlet:1/4” QC socket
• Max. Pressure: 4,500 PSI
• Max Flow: 10.0 GPM
• Number of positions: 3
• Weight: 0.30 lbs

General Flow Switch Up To 25.0 GPM

Features
• Micro-switch technology eliminates reed switch
• Activation below 4.0 GPM
• Minimal pressure drop up to 25 gpm flow
• Mount in vertical position

Specifications
• Maximum Operating Pressure: 3,000 PSI@25 GPM, 4,000 PSI@10 GPM
• Minimum Flow Required for Activation: 4.0 GPM @ 50 PSI
• Maximum Operating Flow: 25.0 GPM
• Operating Temperature Range: 40 - 180 ºF
• Electrical Lead Length: 48” - 18AWG
• Max Switching Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Dimensions: 6.3” x 2.0” x 1.3
• Materials: Buna-N, Brass, Plastic, Nickel-plated Neodymium
• Weight: 1.85 Lb

General Flow Switch With Pilot Feature. The General Pump flow switch is designed to operate in response to a low volume, low pressure flow and still allow for a high pump output flow.

Features
• The system will provide reliable switching with as little as .75 GPM flow and 18 PSI from the city water supply
• will also allow pump output flow up to 18.7 GPM @ 4,000 PSI with negligible pressure drop through the valve
• General Pump flow switches provide durable, reliable on/off switching for systems that require start/stop capability
• Mount in vertical position

Specifications
• Maximum Pressure: 4,000 PSI
• Maximum Flow: 18.7 GPM
• Minimum Volume: 0.75 GPM
• Minimum Pressure: 18 PSI
• Switch Contact Ratings @ 24 Volts DC: 75 Watts, 3A
• Switch Contact Ratings @ 120 Volts AC: 100 Watts, 8A
• Maximum Temperature: 190° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-F
• Material: Brass, Stainless Steel, Buna-N
• Dimensions: 4.25” x 4.5” x 1.25” with 8 foot lead wire
• Weight: 2.5 Lb

General Pump New & Improved DuraView Inlet Water Filter 3/8" MPT X 3/4 FGH with 1/4" Bypass Ports. For general purpose pressure wash use

Features
• NEW FEATURE: over-molded easy grip nut!
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 3/8” NPT-M
• Bypass Ports: 1/4” NPT-F Bypass Port
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump DuraView Inlet Water Filter 3/8" MPT X 3/4 FGH. For general purpose pressure wash use

Features
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 3/8” NPT-M
• Bypass Ports: None
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump New & Improved DuraView Inlet Water Filter 1/2" MPT X 3/4 FGH with 1/4" Bypass Ports. For general purpose pressure wash use

Features
• NEW FEATURE: over-molded easy grip nut!
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 1/2” NPT-M
• Bypass Ports: 1/4” NPT-F Bypass Port
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump DuraView Inlet Water Filter 1/2" MPT X 3/4 FGH. For general purpose pressure wash use

Features
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 1/2” NPT-M
• Bypass Ports: None
• BE # 85.300.054
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General YVB9KMS2 Trapped Pressure Unloader w/ Microswitch 3,650 PSI 8.0 GPM

Features:
• Extremely durable construction in stainless steel and brass
• Easy start-up due to low re-arm pressure (27% of operating pressure)
• Hexagonal discharge check valve to prevent binding
• Unloader with microswitch
• Waterproof, 5-amp pressure switch, UL Listed

Specifications:
• Rated Pressure: 3,200 PSI
• Maximum Pressure: 3,650 PSI
• Rated Temperature: 195° F
• Maximum Flow: 8.0 GPM
• Pressure Switch: 1 amp ind., 5 amps res, 250 Volts
• Inlet Port: 3/8” BSP-F
• Outlet Port: 3/8” BSP-F
• Bypass Port: 3/8” BSP-F
• Gauge Port: 1/4” F
• Weight: 1.6 lbs

PA RL 57 / GP YG7207 Easy Pull Spray Gun 8,000 PSI 7.5 GPM. No fluid passage upon trigger release. New mechanical device with double connecting rods to guarantee less strain when opening and holding

Features
• Covered by shockproof plastic semi-housings
• Seat in Sst and ball in Widia
• Totally built in stainless steel AISI 303
• Ergonomic construction
• Minimum fatigue for trigger opening and use
• New mechanical opening device with double connecting rods
• New trigger design, rotating on a fixed pin to guarantee better mobility and steadiness

Specifications
• Rated Pressure: 7,250 PSI
• Permissible Pressure: 8,000 PSI
• Max Flow: 7.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Use # 2100378 matching 36” lance
• Replaces 30.4700.00
• Weight: 25.18 oz

General Pump Packing Extraction Tool Kit. Tools for removing packings from pumps 13mm through 24mm

Kit Includes:
• Plastic carrying case
• Slide hammer
• Sockets: 13mm, 15mm, 18mm, 20mm, 22mm & 24mm
• Weight: 7.0 lbs

General DCG5010HE Compensating Spray Gun for Hydro Excavation.

Features:
• Specifically designed for use in hydro excavation!
• Exclusive patented GP design
• Unique design compensates for changes in pressure
• Trigger designed for low fatigue
• Allows for continued use without tiring hand
• All flow passages designed for minimum pressure drop - maximum flow
• Fluorocarbon seals for maximum high temperature performance
• Large comfortable hand grip to accommodate work gloves
• Additional venting for excellent high temperature performance
• Durable glass-filled housing and trigger in Zytel (high tech nylon)

Specifications:
• Max Pressure: 5,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.4 lbs

General Pump 1/2” MPT x 48” 304L Stainless Steel 4,500 PSI Hydro Excavating Lance

Specifications:
• Length: 48"
• Pipe Material: 304L Stainless steel
• Inlet: 1/2” Male NPT
• Outlet: 1/2” Male NPT
• Maximum Pressure: 4,500 PSI
• Weight: 4.0 Lbs

General Pump 1/2” MPT x 60” 304L Stainless Steel 4,500 PSI Hydro Excavating Lance

Specifications:
• Length: 60"
• Pipe Material: 304L Stainless steel
• Inlet: 1/2” Male NPT
• Outlet: 1/2” Male NPT
• Maximum Pressure: 4,500 PSI
• Weight: 5.0 Lbs

General YG4032S / PA 30.0680.50 High Flow 32 GPM Straight, Rear Entry Spray Gun for Hydro Excavation.

Features:
• Shockproof plastic housing
• Unique design compensates for changes in pressure
• Internal construction of brass and Stainless Steel
• Ergonomic design
• Minimizes fatigue for the operator

Specifications:
• Max Volume: 32 GPM
• Rated Discharge Pressure: 4,050 PSI
• Max Discharge Pressure: 4,500 PSI
• Max Temp: 210° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• Materials: Stainless Steel, Brass, Plastic, Viton
• Weight: 2.8 lbs

General / PA YG4500S Linear Rear Entry Trigger Gun.

Features:
• Shockproof plastic housing
• Ergonomic design, Minimizes fatigue for the operator
• Stainless Steel seat and ball
• Internal construction of brass and Stainless Steel

Specifications:
• Max Pressure: 5,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.2 lbs

General TSS1511 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Forged brass manifold with an exclusive lifetime warranty
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves
• Designed for suction applications
• Manifold with fine thread valve caps

Specifications Sheet

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 3,500 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 13.0 GHP
• Max. Fluid Temp.: 165 degrees F.
• Inlet Ports (2): 1/2" BSP
• Discharge Ports (2): 3/8" BSP
• Drive Side: Standard right
• Forged brass head & valve covers
• Solid ceramic plungers
• Replaces TS1511 & TS1011
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 32.0 lb.

PA LS 12 / General Pump YLS12T Replacement 1 L Bottle
Only works with model 25.1840.15, 25.1840.65 & YLS12T
PA # 14.6506.00

Specifications:
• Spring Color: Green
• Maximum Pressure: 4,500 PSI
• Rated Pressure: 4,050 PSI
• Max. Volume: 21.0 GPM
• Adjustable pressure
• Forged brass body
• Maximum Temperature: 200° F
• Inlet Ports (2): 1/2" FPT
• Discharge Port: 1/2” FPT
• Bypass Ports (2): 1/2” FPT
• Weight: 3.1 lb

Repair Kit, YG2953, RL19, RL204
PA # 30.4046.24

General Pump 40° (White) #2.5 Quick Connect (Q) Spray Nozzle

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Tip Angle: 40° (White)
• Nozzle Size: 2.5
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 25° (Green) #2.5 Quick Connect (Q) Spray Nozzle

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Tip Angle: 25° (Green)
• Nozzle Size: 2.5
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 15° (Yellow) #2.5 Quick Connect (Q) Spray Nozzle

Features
• 5,000 PSI operating pressure
• Made in the USA
• Ceramic insert is resistant to wear
• Through-hardened stainless steel orifices offer superior wear resistance compared to standard case hardened nozzles
• Stainless steel housing resists cracking and wear
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Tip Angle: 15° (Yellow)
• Nozzle Size: 2.5
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 0° (Red) #2.5 Quick Connect (Q) Spray Nozzle

Features
• 5,000 PSI operating pressure
• Made in the USA
• General Pump High Pressure Spray Tips feature a two piece design
• Inserts are through hardened and pressed into a 303 stainless steel rust-resistant body for improved durability
• The contour control nozzle chamber eliminates the need for flow straighteners
• Resistant to most chemical
• Large color coded tip protector on Q-type nozzles permits rapid identification of fan angle
• Laser marked for clarity and durability

Specifications
• Tip Angle: 0° (Red)
• Nozzle Size: 2.5
• Operating Pressure: 5,000 PSI
• Connection: 1/4” QC Plug
• Weight: 0.05 oz

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

General Pump 5,500 PSI High Pressure Inline Filter, 1/4” QD Plug x 1/4” NPT-M. Extend the life of your rotating or variable nozzle with an inlet filter

Features:
• 100 Mesh Screen
• 303 SS w/Brass Outlet

Specifications:
• Max. Pressure: 5,500 PSI
• Max. Volume: 8.0 GPM
• Screen: 100 Mesh
• Maximum Temperature: 200° F
• Inlet: 1/4" QD Plug
• Outlet: 1/4" NPT-M
• Materials: Brass, Stainless Steel, Buna-N
• Weight: 0.25 lbs.

General Pump 3/8" 5,000 PSI Stainless Steel Quick Disconnect Fittings (1 Plug & 1 Socket)

Features:
• Quick disconnect design
• Body Material: 304 Stainless steel
• 1 pc: General Pump 3/8 NPT-F Quick disconnect coupler socket with EPDM O-ring
• 1 pc: General Pump 3/8 NPT-F Quick disconnect coupler plug
• Max Temp: 175°
• Max Operating Pressure: 5,000 PSI
• Works with standard quick connects
• Weight: 0.30 lb

General Pump #2.3mm Adjustable High Draw Chemical Injector with Acid Kit & 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #2.3 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Acid kit with ceramic check ball
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump #2.1mm Adjustable High Draw Chemical Injector with Acid Kit & 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #2.1 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Acid kit with ceramic check ball
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump #1.8mm Adjustable High Draw Chemical Injector with Acid Kit & 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #1.8 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Acid kit with ceramic check ball
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Ceramic, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump #2.3mm Adjustable High Draw Chemical Injector Kit with 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #2.3 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 2.3 mm (5.0 to 8.0 GPM)
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump #2.1mm Adjustable High Draw Chemical Injector Kit with 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #2.1 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 2.1 mm (3.0 to 5.0 GPM)
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump #1.8mm Adjustable High Draw Chemical Injector Kit with 3/8” Quick Disconnects. This 0 - 20% adjustable flow chemical injector is connected to the downstream side of the pressure pump and is activated when using a low pressure soap nozzle. Choose size based on flow rate of your pressure washer

Kit Components:
• General Pump #1.8 mm 20% adjustable chemical injector (Made in the USA)
• General Pump 3/8” Steel QD plug
• General Pump 3/8” Brass QD socket
• Plastic chemical filter
• 5’ Clear PVC chemical line

Injector Specifications:
• Size: # 1.8 mm (2.0 to 3.0 GPM)
• Adjustable Injection ~ 0 - 20%
• Max Operating Pressure: 4,000 PSI
• Max Temperature: 175° F
• Chemical Port: 1/4” Hose Barb
• Materials: Brass, Stainless Steel, Viton
• Note: If between sizes, choose the smaller injector size
• Weight: 0.80 lbs

General Pump 3/8" 4,000 PSI Quick Disconeect Coupler Fittings (1 Plug & 1 Socket)

Features:
• Working Pressure: 4,000 PSI
• 1 pc: 3/8” NPT-F Brass quick coupler socket
• 1 pc: 3/8” NPT-F Zinc Plated Hardened Steel quick disconnect coupler plug
• Works with standard quick connects
• Weight: 0.30 lb