General Pump

General T9281 Triplex Plunger Pump. The preferred pump frame in the pressure cleaning industry

Features:
• Nickel plated forged brass manifold
• Large-capacity, die-cast, anodized aluminum oil-bath crankcase
• Over-sized connecting rods for maximum life
• Heavy-duty tapered roller bearing
• Solid ceramic plungers with continuously lubricated packings
• Unitized stainless steel inlet and discharge valves

WARNING: High Pressure Systems require a primary pressure regulating device (i.e. regulator, unloader) and a secondary pressure relief device (i.e. pop-off valve, relief valve). Failure to install such relief devices properly could result in personal injury or damage to pump or property. GP and PRI Industries do not assume any liability or responsibility for the operation of the user’s high pressure system.

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 11.0 EBHP
• Maximum Inlet Pressure: 125 PSI
• Oil Capacity: 37.2oz.
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2-14 BSPP-F
• Discharge Ports (2): 3/8-19 BSPP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 33.0 lb.

General Pump DHRGH150 5/8" x 150' Heavy Duty Garden Hose Reel with Pedestal Stand

FEATURES
• HD pedestal stand - mount on wall, workbench or pressure washer
• Durable gray high-gloss powder coated finish
• One-piece welded drum
• Robust high flow brass swivel
• Can be set up for left- or right-hand orientation
• Can be mounted parallel or perpendicular to a wall
• Includes 6', 5/8" connection hose, brass fittings, and mounting hardware

Specifications Sheet

SPECIFICATIONS
• Capacity: 150’ of 5/8” garden hose
• Max. PSI: 150
• Color: Gray
• Inlet: 3/4" GH-F
• Outlet: 3/4" GH-M
• Materials: Aluminum, Steel, Brass, Rubber
• Carton Dimensions: 20.0” x 17.5” x 15.5”
• Weight 22.0 lbs

• General 66 Series Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 5.5 GPM
• Max. Discharge Pressure: 5,000 PSI
• Max. Pump Speed: 1450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 18.8 EHP
• Max. Fluid Temp.: 165° F
• Inlet Ports (2): 1/2" FPT
• Discharge Ports (2): 3/8" FPT
• Forged brass head has an exclusive lifetime warranty
• Plunger design improves thermal shock resistance
• Drive Side: Left
• Weight: 52.0 lb.

General TSP1621 High Pressure Triplex Plunger Pump 6,525 PSI 4.3 GPM 1,450 RPM

Features:
• Compact, High Pressure
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves “thermal shock” resistance
• New valve cap design improves hydrostatic performance

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 4.3 GPM
• Max. PSI: 6,525
• Max. Pump Speed: 1,450 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 19.2 EBHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2” BSP-F
• Discharge Ports (2): 3/8” BSP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 51.8 lb.

General TSP1619 High Pressure Triplex Plunger Pump 7,250 PSI 3.6 GPM 1,450 RPM / 5,800 PSI 4.3 GPM 1,750 RPM

Features:
• Compact, High Pressure
• Oversized roller bearings
• Fully anodized crankcase
• Innovative new seal design extends seal life
• New plunger design improves “thermal shock” resistance
• New valve cap design improves hydrostatic performance

Specifications:
• Triplex Plunger Pump
• Solid Shaft for Belt or Gear Drive
• Max. Volume: 3.6 / 4.3 GPM
• Max. PSI: 7,250 / 5,800
• Max. Pump Speed: 1,450 / 1,750 RPM
• Shaft Diameter: 24mm Solid
• Max. Horsepower Requirements: 17.8 EBHP
• Max. Fluid Temp.: 165° F.
• Inlet Ports (2): 1/2” BSP-F
• Discharge Ports (2): 3/8” BSP-F
• Drive Side: Standard right
• Note: Item for sale is PUMP ONLY as shown in picture and does not include unloader which is required for proper operation
• Weight: 51.8 lb.

General Pump 103073 Assembly, Pilot Valve

General Pump YYSTR12 Brass Y-Strainer 1/2" NPT-F 50 Mesh

Specifications
• Maximum Temperature: 194° F
• Maximum Pressure: 170 PSI
• Screen Mesh Size: 50 Mesh (300 Micron)
• Materials: Brass, Stainless Steel
• Port Sixes: 1/2” NPT-F
• Dimensions: 2.9” x 2.2” x 1.2”
• Weight: 0.30 Lbs

General Pump 2660059 Brush Assembly for DCFSCP20 & DCFSCP20GZ
• Size: 20" x 20" x 2"
• Weight: lb

General Pump 2100375 Cart Kit for D3000 & DHR Hose Reels. Cart has pre-drilled mounting base platform

FEATURES
• Convert your General Pump hose reel into a hose reel cart
• Makes storage and moving of your fully loaded hose reel easy
• Stainless steel hardware
• Powder coated steel frame
• Unique design
• Solid 10” Polyurethane wheels will never go flat
• Removable handle for compact storage

SPECIFICATIONS
• Works with Hose Reel Models: D3000 and DHR
• Color: Black
• Carton Size: 33” x 21” x 9”
• Hose Reel Not Included
• Weight 27.5 lbs

General Pump 2100200 Caster Kit (4) for the DCFSCP18GZ and DCFSCP20GZ

SPECIFICATIONS
• Optional for DCFSCP18GZ and DCFSCP20GZ
• Stainless steel brackets
• Shipping Weight 3.5 lbs

General Pump DF10050 Clear Bowl Inlet Filter / Strainer 1" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1” NPT-F
• Outlet: 1” NPT-F
• Weight: 0.75 Lbs

General Pump DF10080 Clear Bowl Inlet Filter / Strainer 1" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1” NPT-F
• Outlet: 1” NPT-F
• Weight: 0.75 Lbs

General Pump DF05050 Clear Bowl Inlet Filter / Strainer 1/2" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Weight: 0.50 Lbs

General Pump DF05080 Clear Bowl Inlet Filter / Strainer 1/2" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Weight: 0.50 Lbs

General Pump DF15050 Clear Bowl Inlet Filter / Strainer 1-1/2" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1-1/2” NPT-F
• Outlet: 1-1/2” NPT-F
• Weight: 1.0 Lbs

General Pump DF15080 Clear Bowl Inlet Filter / Strainer 1-1/2" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1-1/2” NPT-F
• Outlet: 1-1/2” NPT-F
• Weight: 1.0 Lbs

General Pump DF12550 Clear Bowl Inlet Filter / Strainer 1-1/4" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1-1/4” NPT-F
• Outlet: 1-1/4” NPT-F
• Weight: 0.75 Lbs

General Pump DF12580 Clear Bowl Inlet Filter / Strainer 1-1/4" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 1-1/4” NPT-F
• Outlet: 1-1/4” NPT-F
• Weight: 0.75 Lbs

General Pump DF07550 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 50 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 50 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General Pump DF07580 Clear Bowl Inlet Filter / Strainer 3/4" NPT-F 80 Mesh

Features
• Keeps debris out of pump
• Clear plastic bowl makes it easy to see when cleaning is required
• 80 mesh, stainless steel mesh screen
• Easy to install
• Easy to disassemble and assemble for cleaning
• Made with durable long lasting materials

Specifications
• Bowl: Polycarbonate
• Body: Nylon
• Screen: Stainless steel
• O-Ring: EPDM
• Maximum Pressure at 125° F: 100 PSI
• Maximum Pressure at 70° F: 150 PSI
• Inlet: 3/4” NPT-F
• Outlet: 3/4” NPT-F
• Weight: 0.50 Lbs

General Pump DuraView Inlet Water Filter 1/2" MPT X 3/4 FGH. For general purpose pressure wash use

Features
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 1/2” NPT-M
• Bypass Ports: None
• BE # 85.300.054
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump New & Improved DuraView Inlet Water Filter 1/2" MPT X 3/4 FGH with 1/4" Bypass Ports. For general purpose pressure wash use

Features
• NEW FEATURE: over-molded easy grip nut!
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 1/2” NPT-M
• Bypass Ports: 1/4” NPT-F Bypass Port
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump DuraView Inlet Water Filter 3/8" MPT X 3/4 FGH. For general purpose pressure wash use

Features
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 3/8” NPT-M
• Bypass Ports: None
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump New & Improved DuraView Inlet Water Filter 3/8" MPT X 3/4 FGH with 1/4" Bypass Ports. For general purpose pressure wash use

Features
• NEW FEATURE: over-molded easy grip nut!
• Strongest see-through filter on the market
• Loadbearing brass spine
• Integrated garden hose connector
• Flow through design
• Clear plastic cover

Specifications
• Maximum Temperature: 180° F
• Max Volume: 8.0 GPM
• Maximum Operating Pressure: 150 PSI
• Minimum Operating Pressure: 15 PSI
• Materials: Brass, Stainless Steel, Buna-N
• Inlet: Female garden hose (FGH)
• Outlet: 3/8” NPT-M
• Bypass Ports: 1/4” NPT-F Bypass Port
• Dimensions: 1.125” x 3.75”
• Weight: 1.50 Lbs

General Pump 2103410 Electric Hose Reel Motor Kit. Fits DHRA Hose Reels

FEATURES
• Allows for effortless rewinding of hose
• Free spin allows for easy pulling out of hose
• Durable powder coated finish
• Stainless steel hardware
• Long lasting hardened gears

SPECIFICATIONS
• Works with DHRA50150, DHRA50300 & DHRA50450 A Frame Hose Reels
• Voltage 12V DC
• Hose Reel Not Included
• Weight 21 lbs

General / PA YG4500S Linear Rear Entry Trigger Gun.

Features:
• Shockproof plastic housing
• Ergonomic design, Minimizes fatigue for the operator
• Stainless Steel seat and ball
• Internal construction of brass and Stainless Steel

Specifications:
• Max Pressure: 5,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.2 lbs

General YG4500STC / PA Linear Rear Entry Trigger Gun with Stainless inlet fitting & tube and ceramic ball.

Features:
• Shockproof plastic housing
• Ergonomic design, Minimizes fatigue for the operator
• Stainless Steel seat, inlet fitting & tube
• Ceramic bal
• Internal construction of brass and Stainless Steel

Specifications:
• Rated Pressure: 4,500 PSI
• Max Pressure: 5,000 PSI
• Max Flow: 10.5 GPM
• Max Temp: 320° F.
• Inlet: 3/8” NPT-F
• Outlet: 1/4” NPT-F
• Materials: Stainless Steel, Brass, Ceramic, Plastic, Buna-N, Teflon
• Dimensions: 8.4” x 5.4” x 1.2”
• Weight: 1.3 lbs

General Pump DCG5010SO Compensating Low Fatigue Rear Inlet Trigger Gun (Safety Orange) 5,000 PSI 10.5 GPM

Features:
• Exclusive patent-pending GP design
• Unique design compensates for changes in pressure
• Trigger designed for low fatigue
• Allows for continued use without tiring hand
• All flow passages designed for minimum pressure drop - maximum flow
• Fluorocarbon seals for maximum high temperature performance
• Large comfortable hand grip to accommodate work gloves
• Additional venting for excellent high temperature performance
• Durable glass-filled housing and ABS trigger
• High visibility safety orange

Specifications:
• Max Volume: 10.5 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless Steel, Plastic, Viton
• Weight: 1.5 lbs

General Pump DCG5010 Compensating Low Fatigue Rear Inlet Trigger Gun 5,000 PSI 10.5 GPM

Features:
• Exclusive patent-pending GP design
• Unique design compensates for changes in pressure
• Trigger designed for low fatigue
• Allows for continued use without tiring hand
• All flow passages designed for minimum pressure drop - maximum flow
• Fluorocarbon seals for maximum high temperature performance
• Large comfortable hand grip to accommodate work gloves
• Additional venting for excellent high temperature performance
• Durable glass-filled housing and trigger in Zytel (high tech nylon)

Specifications:
• Max Volume: 10.5 GPM
• Max Pressure: 5,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Materials: Brass, Stainless Steel, Plastic, Viton
• Weight: 1.5 lbs

GP YVB75KDMN21 Direct Mount Unloader with 2.1 MM Injector Fits General Series Pumps: 44 (EZ Pumps), 47, 60 and 63 (TX Pumps)

• Maximum Pressure: 3,650 PSI
• Max. Volume: 7.8 GPM
• Adjustable pressure
• Chemical Injector: 2.1mm
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Ports (1): 1/2" FPT
• Discharge Ports (1): 3/8” MPT
• Weight: 2.1 lbs

Gereral Pump YVB135KDM Direct Mount Unloader Fits General Series Pumps: TT & TP 51 Series Pumps

• Maximum Pressure: 3,650 PSI
• Max. Volume: 6.5 GPM
• Adjustable pressure
• No Chemical Injector
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Port: 3/8" FPT
• Outel Port: 3/8” MPT
• Weight: 1.5 lbs

Gereral Pump YVB135KDMI18 Direct Mount Unloader with 1.8 Chemical Injector. Fits General Series Pumps: TT & TP 51 Series Pumps

• Maximum Pressure: 2,600 PSI
• Max. Volume: 6.5 GPM
• Cemical Injector Size: 1.8mm
• Adjustable pressure
• Forged brass body & hardware
• Built-In bypass channel
• Max. Fluid Temp.: 195 degrees F.
• Inlet Port: 3/8” BSPP-F
• Outel Port: 3/8” BSPP-M
• Weight: 1.7 lbs

General Pump YVB35KDME Direct-Mount, Control Set Unloader Used with ET, EP & ES Series Pumps

Featuring:
• Direct-mount, control set unloader
• Used with ET, EP and ES Series pumps
• Built-in bypass
• Sturdy steel and brass construction
• Adjustable locknut to control the maximum pressure
• Plastic adjustment knob (not pictured)

Specifications:
• Rated Pressure: 3,200 PSI
• Minimum Adjustable Pressure: 319 PSI
• Maximum Discharge Pressure: 3.650 PSI
• Rated Volume: 6.5 GPM
• Pressure Drop to Reset Bypass: 19%
• Max. Fluid Temp.: 195° F.
• Inlet Port: 1/2” BSP-F
• Outlet Port: 3/8” BSP-M
• Materials: Brass, Stainless Steel, Buna-N
• Overall Dimensions: 5.9” x 3.0” x 1.75”
• Weight: 1.8 lbs

4,000 PSI 4.0 GPM General EP1313G8 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EP1313G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Max. Fluid Temp.: 165º F
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

COMPONENTS:
• General EP1313G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 19.90 lb

3,045 PSI 3.4 GPM General EP1508G8 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EP1508G8 Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 3.4 GPM
• Max. Discharge Pressure: 3,045 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 10.6 GHP
• Max. Fluid Temp.: 165º F
• New Forged brass manifold , increases working pressure to 4,000 PSI
• Solid ceramic plungers with dual guide system

COMPONENTS:
• General EP1508G8 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 19.90 lb

2,610 PSI 2.9 GPM General PMRET1506G6 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General ET1506G6 Pump with SAE J609A Gas Flange
• Direct Drive with Gas Flange 5.0-7.0 HP SAE
• Max. Volume: 2.9 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 6.9 GHP
• Max. Fluid Temp.: 165º F
• New “HR” anti-corrosion surface treatment on manifold
• Solid ceramic plungers

COMPONENTS:
• General ET1506G6 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 14.90 lb

2,610 PSI 3.2 GPM General PMRET1507G6 Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General ET1507G6 Pump with SAE J609A Gas Flange
• Direct Drive with Gas Flange 5.0-7.0 HP SAE
• Max. Volume: 3.2 GPM
• Max. Discharge Pressure: 2,610 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 3/4” Hollow
• Max. Horsepower Requirements: 7.6 GHP
• Max. Fluid Temp.: 165º F
• Nickel-plated cast manifold manufactured like heavy-duty pump line
• Solid ceramic plungers

COMPONENTS:
• General ET1507G6 Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 14.90 lb

4,000 PSI 4.0 GPM General EZ4040G Direct Drive Pump Made Ready W/ PULSAR4KHPEZ EZ Start Unloader. Pump is ready to use right out of the box

PUMP:
• General EZ4040G Pump with SAE J609 Gas Flange
• Direct Drive with Gas Flange 9.0-13.0 HP SAE
• Max. Volume: 4.0 GPM
• Max. Discharge Pressure: 4,000 PSI
• Max. Pump Speed: 3,400 RPM
• Shaft Diameter: 1” Hollow
• Max. Horsepower Requirements: 14.5 GHP
• Max. Fluid Temp.: 165º F
• Forged brass head & valve covers
• Solid ceramic plungers

COMPONENTS:
• General EZ4040G Triplex Plunger Pump
• PULSAR4KHPEZ EZ Start Unloader 4,050 PSI, 10 GPM
• Thermal relief valve
• 3/8” Hose Barb and Clamp Keeps Hose Secure and Sealed
• 3/4” Garden Hose Inlet Fitting with 1/4” Side Port
• 3/8” QC brass socket Installed and 3/8” QC Plug Included
• Mounting bolts
• Note: Pumps are not tested prior to shipping and unloader will need to be adjusted
• Weight: 23.50 lb

General Flow Switch Up To 25.0 GPM

Features
• Micro-switch technology eliminates reed switch
• Activation below 4.0 GPM
• Minimal pressure drop up to 25 gpm flow
• Mount in vertical position

Specifications
• Maximum Operating Pressure: 3,000 PSI@25 GPM, 4,000 PSI@10 GPM
• Minimum Flow Required for Activation: 4.0 GPM @ 50 PSI
• Maximum Operating Flow: 25.0 GPM
• Operating Temperature Range: 40 - 180 ºF
• Electrical Lead Length: 48” - 18AWG
• Max Switching Voltage: 250 VAC
• Max Switching Current: 5 AMPS
• Inlet: 1/2” NPT-F
• Outlet: 1/2” NPT-F
• Dimensions: 6.3” x 2.0” x 1.3
• Materials: Buna-N, Brass, Plastic, Nickel-plated Neodymium
• Weight: 1.85 Lb

General Flow Switch With Pilot Feature. The General Pump flow switch is designed to operate in response to a low volume, low pressure flow and still allow for a high pump output flow.

Features
• The system will provide reliable switching with as little as .75 GPM flow and 18 PSI from the city water supply
• will also allow pump output flow up to 18.7 GPM @ 4,000 PSI with negligible pressure drop through the valve
• General Pump flow switches provide durable, reliable on/off switching for systems that require start/stop capability
• Mount in vertical position

Specifications
• Maximum Pressure: 4,000 PSI
• Maximum Flow: 18.7 GPM
• Minimum Volume: 0.75 GPM
• Minimum Pressure: 18 PSI
• Switch Contact Ratings @ 24 Volts DC: 75 Watts, 3A
• Switch Contact Ratings @ 120 Volts AC: 100 Watts, 8A
• Maximum Temperature: 190° F
• Inlet: 3/8” NPT-M
• Outlet: 3/8” NPT-F
• Material: Brass, Stainless Steel, Buna-N
• Dimensions: 4.25” x 4.5” x 1.25” with 8 foot lead wire
• Weight: 2.5 Lb

General ZK1 Flow Unloader 3,600PSI, 3/8" BSP-F Inlet & 1/2" BSP-M

• Max. Pressure: 3,600 PSI
• Max. Volume: 2.3 - 10.8 GPM
• Adjustable pressure
• Brass body
• Max. Fluid Temp.: 165°
• Inlet: 3/8" BSP-F
• Outlet: 1/2" BSP-M
• Bypass: 1/2" BSP-M
• Gauge Port: 1/4" BSP-F
• Weight: 2.3 lbs.

General ZK138 Flow Unloader 3,600PSI, 3/8" BSP-F Inlet & 3/8" BSP-M

• Max. Pressure: 3,600 PSI
• Max. Volume: 2.4 - 10.8 GPM
• Adjustable pressure
• Brass body
• Max. Fluid Temp.: 165°
• Inlet: 3/8" BSP-F
• Outlet: 3/8" BSP-M
• Bypass: 1/2" BSP-M
• Gauge Port: 1/4" BSP-F
• Weight: 2.3 lbs.

General 100804 High Draw Chemical Injector Acid Repair Kit

Each Kit Contains:
• (1) Spring #720049
• (1) O-ring, 70 Duro, Viton, .208x.070 #701501
• (1) Ball, Injector, Ceramic (Optional) #640065

Injector Specifications:
• Works with High Draw Fixed Injectors 100773, 100774, 100775, 100776, 100873, 100874 & 100875
• Works with High Draw Adjustable Injectors 100810, 100811, 100812 & 100813
• Weight: lbs

General 100803 High Draw Chemical Injector Repair Kit

Each Kit Contains:
• (1) Spring #720049
• (1) O-ring, 70 Duro, Viton, .208x.070 #701501
• (1) Ball, Injector, 316 SS #520167

Injector Specifications:
• Works with High Draw Fixed Injectors 100773, 100774, 100775, 100776, 100873, 100874 & 100875
• Works with High Draw Adjustable Injectors 100810, 100811, 100812 & 100813
• Weight: lbs

General 100817 High Draw Stainless Steel Adjustable Chemical Injector Acid Repair Kit

Each Kit Contains:
• (1) Spring #720049
• (2) O-ring, 70 Duro, Viton, .208x.070 #701501
• (1) Ball, Injector, Ceramic (Optional) #640065

Injector Specifications:
• Works with High Draw Adjustable Injectors 100861, 100811, 100862 & 100863
• Weight: lbs

General Pump DGE4012NT Hot/Cold Water Open Spray Gun (No Trigger) 4,000 PSI 12 GPM

Features:
• Always open / no trigger
• Additional venting for excellent high temperature performance
• Large comfortable hand grip to accommodate work gloves

Specifications:
• Max Volume: 12 GPM
• Max Pressure: 4,000 PSI
• Max Temp: 320° F.
• Inlet: 3/8" NPT-F
• Outlet: 1/4" NPT-F
• Note: Open, No Trigger
• Weight: 1.0 lbs

Features
• Made in Italy with high quality materials
• Fits General Pump Models: CW2004, CW2040, CW3040, T1011, T1321, T1505EBF, T1621, T2031, T721, T731, T9051EBF, T921, T9211, T9281, T9721, T9731, T9791, T991, T9951, T9971, TS1011, TS1021, TS1321, TS1511, TS1621, TS1711, TS1811, TS2011, TS2021, TT2028, TT2035, TT9061, ,TS9071, TT9111, TT9351, TT941, TT9441

Kit Contents
• 6 Check valves
• 6 O-Rings, check valve