MTM Hydro

MTM Hydro 24.0100 Brass Top Mount Pressure Gauge Quick Disconnect Fitting

MTM Hydro's Brass Pressure Gauge Fitting with Port is meant to be paired with a 1/4” bottom-mount pressure gauge (Not included). With 3/8" Quick Couplers on both ends, this tool can quickly be relocated anywhere in your pressurized line to measure baseline and performance pressure

Specifications
• Material: Brass & stainless steel
• Gauge Port: 1/4” Female
• Max. Pressure: 2,700 PSI
• Wight: 0.31 lbs

MTM Hydro 44.5581 Ultimate Shine Tire Dressing 16oz. Our tire shine is designed to be applied with our “puck” applicator or mechanically through brushes, foam pads or cloth. Due to its unique blend of silicones this tire dressing reduces "sling" while creating high gloss with minimal product usage. Allow time for tire shine to cure before driving. Dry time may vary based on volume of usage and ambient temperature

How To:
• Apply a thin layer of product to clean / dry tire
• Use an MTM “puck” applicator to smooth out the application. Or for extra high gloss, apply tire shine without wiping
• Please be sure to allow for adequate dry time to avoid “sling”
• Caution: Application area may be slippery during and after use if not cleaned up

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.10 lbs

MTM Hydro's Brass Nozzle Cleaner feature a 1/4" QC plug for easy storage and a 0.8mm diameter cleaning pin for even the smallest nozzles. Keep your nozzles in top condition by regularly cleaning them to ensure optimum pressure and GPM

Specifications:
• Body & Cap Material: Brass
• Pin Size: 0.8MM (3.0 Nozzle size or greater)
• QC Plug: 1/4”
• Weight: 0.10 lbs

Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Rotating nozzle adds more agitation, which increase cleaning & flushing action
• 3 Backward jets spin nozzle and drive forward
• Corrosion resistant stainless steel and brass construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 5.5
• Material: Stainless steel & brass
• Maximum Pressure: 4,000 PSI
• Max. Fluid Temperature: 300º F
• Weight: 1.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

MTM Hydro 44.5541 Protective Shine Quick Detail Spray 16oz. Our easy to use high gloss Quick Detail Spray creates a durable protective shine on your vehicle. Designed to provide that "just waxed" appearance in a fraction of the time. Perfect for car shows, home, and professional use. Removes hard water marks, dust, and fingerprints. Safe on chrome, aluminum, plastic, and most paint types including: acrylic, metallic, pearlescent, and matte. Simply spray the pH neutral quick detail spray onto a clean vehicle surface and wipe off to reveal a high luster

How To:
• Apply quick detail spray directly to a clean and dry surface, preferably in a shaded / covered area
• Wipe immediately in circular motions using a clean dry premium buffing microfiber towel wipe off being sure to rotate towel as necessary

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.20 lbs

MTM Hydro 44.5561 High Definition Glass Cleaner 16oz. Our Hi-Def glass cleaner is designed to eliminate streaking and spotting on exterior and interior glass. It also works well on other nonporous surfaces such as most counter tops, mirrors, tubs and tile

How To:
• Apply solution to cool dry surface
• Wipe immediately with our exclusive HD glass towel or clean microfiber towel in a circular motion while the solution is still wet. DO NOT allow the product to dry on the surface of the window
• Note: Test small area to ensure desired results

Specifications
• Proudly Made In The USA
• Bottle Size: 16 oz
• Weight: 1.20 lbs

Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 1/4” FPT
• Nozzle Size: # 5.5
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.6 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Specifications
• Fits all standard 3/8" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black
• Replaces QCO2B-25 Pack
• Quantity: 25

Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 5.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Specifications
• Fits all standard 1/4" quick couplers
• Material: Buna
• Max. Temperature: 210° F
• Color: Black
• Replaces QCO1B-25 Pack
• Quantity: 25

M22-14MM F x M22-14MM F Twist Coupler Socket Adapter. This standard M22-14MM adapter works with most pressure washers

Features:
• Secure twist connection
• Precision machined
• High-Impact plastic Knob
• Internal o-ring seal

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass & Zinc plated steel
• Outlet: Female M22-14MM F
• Inlet: Female M22-14MM F
• Weight: 0.30 lbs.

Features
• Forward jet breaks up clogs & debris
• 3 Backward jets drive nozzle forward and flushes and removes debris from sides of line
• Corrosion resistant stainless steel construction

Specifications
• Inlet: 1/8” FPT
• Nozzle Size: # 4.0
• Material: Stainless steel
• Maximum Pressure: 4,200 PSI
• Max. Fluid Temperature: 300º F
• Weight: 0.3 oz.

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

M22-14MM M x M22-14MM M Twist Coupler Plug

Features:
• Precision machined

Specifications:
• Max. Pressure: 4,000 PSI
• Max. Flow: 10.0 GPM
• Material: Brass
• Inlet: Male M22-14MM M
• Outlet: Male M22-14MM M

Specifications:
• Size: 3/4" ID x 1-3/8" OD
• Overall Width: 7/16”
• Flange OD: 1-1/2”
• Material: Steel
• Weight: 0.10 lbs

Specifications:
• Size: 5/8" ID x 1-3/8" OD
• Overall Width: 1/2”
• Flange OD: 1-1/2”
• Material: Steel
• Weight: 0.10 lbs