Suttner America

1/4” Suttner ST-49 “Predator” Sewer Nozzle # 4.5, 1 Front, 3 Rear 7,252 PSI.

Features
• High Quality, German engineered components
• Due to its conical front design this is the ideal solution to make its way through tight bends and traps
• 3 Rear jets for maximum thrust and powerful cleaning impact
• Front jet to blast through roots and scale or de-icing
• Hardened stainless steel
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 4.5
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Max Flow: 6.6 GPM
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .86”
• Length: 1.69”
• Weight: .13 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• High Quality, German engineered components
• Ceramic ball in valve is highly resistant against nearly all soaps and acids
• Easy-Pull™ is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull™, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun
• Easiest opening and holding trigger, requires nearly half the effort of the other rear-entry guns
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.30 lb

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.34 lbs

Suttner ST-230 Safety Relief Valve 5,070 PSI (New Style). Ideal in-line regulator for multi-gun pumping units on se!f-serve car wash systems. Perfect forpressure washer/steam combination applications

Features:
• Adjustable pressure
• Forged brass housing, stainless steel ball and valve seat
• Special seals for maximum heat and chemical resistance
• Valve member rides on elastomeric cushion, eliminating metal to metal contact, a common cause of regulator failure
• Quickly re-buildable with repair kit. Can be rebuilt without removing from the installation

Specifications:
• Pressure: 500 - 5,070 PSI
• Flow Rate: 8 GPM
• O-Ring: EPDM
• Max Temperature: 200° F
• Inlet: 1/4" FNPT
• Outlet: 1/4” FNPT
• Replaces 200230600
• Weight: 0.84 lbs

Suttner ST-7.1 Pressure Switch, 580 Switching Point (Black), 1/4" M 4,350 PSI

Features:
• IP 65 protection class
• Simultaneous N/O and N/C connection is possible
• The design of the micro switch allows comparably high inrush current (20 Amps N/C, 15 Amps N/O)
• The electrical capacity of the switch is 10.1 Amps (resistive load)
• No ingress of towing water into the environment of the microswitch possible

Suttner ST-7.1 Data Sheet

Specifications:
• Switch Point: 580 PSI (Black)
• Max. Pressure: 4,350 PS
• Voltage: 10.1 A - 250 VAC
• Max: Fluid Temperature: 194° F
• Cable Length: 37.4”
• Thread: 1/4” Male
• Material: Brass / plastic
• Protection Class” IP 65
• Weight: 0.65 lbs

Suttner ST-7.1 Pressure Switch, 360 Switching Point (Red), 1/4" M 4,350 PSI

Features:
• IP 65 protection class
• Simultaneous N/O and N/C connection is possible
• The design of the micro switch allows comparably high inrush current (20 Amps N/C, 15 Amps N/O)
• The electrical capacity of the switch is 10.1 Amps (resistive load)
• No ingress of towing water into the environment of the microswitch possible

Suttner ST-7.1 Data Sheet

Specifications:
• Switch Point: 360 PSI (Red)
• Max. Pressure: 4,350 PS
• Voltage: 10.1 A - 250 VAC
• Max: Fluid Temperature: 194° F
• Cable Length: 37.4”
• Thread: 1/4” Male
• Material: Brass / plastic
• Protection Class” IP 65
• Weight: 0.65 lbs

Suttner ST-340 High Flow Stainless Steel Swivel 1/2 M x 1/2 F 42 GPM 3,200 PSI. 1/2” Live swivel is perfect for connecting to trigger, booms, etc.

Features
• High Quality, German engineered components
• Stainless steel material
• Double PTFE slide rings for easy movement
• Bearing material: PTFE

Specifications
• Max Pressure: 5,075 PSI
• Max Flow: 42 GPM
• Max Temp: 212° F.
• Inlet: 1/2" Male NPT
• Outlet: 1/2" Female NPT
• RPM: 30
• Weight: 0.25 lb

1/4” Suttner ST-49 “Hydro Mole” Sewer Nozzle # 7.0, 4 Front, 3 Rear 7,252 PSI.

Features
• High Quality, German engineered components
• 4 Strong, concentrated forward jets for breaking through most any solid clog including ice
• 3 Rear jets for maximum thrust and powerful cleaning impact
• Nozzle ports are stepped for protection against physical impact
• Hardened stainless steel
• Works best on 2" to 4" Pipes

Specifications
• Nozzle Size: # 7.0
• Material: Stainless steel
• Maximum Pressure: 7,252 PSI
• Inlet: 1/4” Female
• Outside Diameter (O.D.): .86”
• Length: 1.19”
• Weight: .08 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features:
• Only tamper-resistant operator adjustable valve in the industry which allows limit setting on both maximum pressure and minimum pressure
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit

Specifications:
• Maximum Pressure: 3,625 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.34 lbs

Suttner ST-357 Turbo / Rotating #3.0 Nozzle is rated for up to 3,625 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete, graffiti cleaning or caked on mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 3.0
• Max PSI: 3,625
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.68 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-357 Turbo / Rotating #3.5 Nozzle is rated for up to 3,625 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete, graffiti cleaning or caked on mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 3.5
• Max PSI: 3,625
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.68 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-357 Turbo / Rotating #4.0 Nozzle is rated for up to 3,625 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete, graffiti cleaning or caked on mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 4.0
• Max PSI: 3,625
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.68 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-357 Turbo / Rotating #4.5 Nozzle is rated for up to 3,625 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete, graffiti cleaning or caked on mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 4.5
• Max PSI: 3,625
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.68 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-357 Turbo / Rotating #5.0 Nozzle is rated for up to 3,625 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete, graffiti cleaning or caked on mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 5.0
• Max PSI: 3,625
• Max Temp.: 190° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.68 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart