Suttner America

Features
• High Quality, German engineered components
• The Relax-Action™, German Engineered Technology reduces trigger pulling force by 40% and holding force up to 90% compared to usual competitors spray gun
• Relax-Action™ is designed for operators and applications with longer periods of cleaning time
• Easiest opening and holding trigger in its class
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength

Specifications
• Max Pressure: 1,800 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 1.30 lb

Features:
• Adjustable valve allows limit setting on both maximum pressure and minimum pressure
• Straight flow-through design minimizes pressure loss through valve
• Working components constructed of high-grade stainless steel. PTFE and Viton seals for maximum heat and chemical resistance
• Internal bypass valve can be easily accessed and repaired without removing unloader from unit
• Multi gun operational

Specifications:
• Maximum Pressure: 4,060 PSI
• Minimum Pressure: 500 PSI
• Flow Rate: 8 GPM
• Max Temperature: 176° F
• Inlet Port: 3/8" FNPT
• Outlet Port: 3/8” FNPT
• Bypass Port: 1/4” FNPT
• Weight: 1.80 lbs

Suttner ST-73.2 Foamer with 64 oz. Bottle, Stainless Steel Integrated Injector, 1/4" F Inlet. Convenient and portable for more effective foam cleaning for Industry, Agriculture, Automotive/Fleet and Institutional applications! By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. Our latest innovation realizes an ideal mixing of air and cleaning agent, thus succeeding an ideal foam result

Features
• 5 Position metering valve for chemical draw
• Sometimes, less is more! This version of our foam injector lance is equipped with a mesh strainer instead of a foam pad. Not being equipped with a foam pad contributes to the fact that blockages can be almost ruled out
• Adjustable nozzle - with a simple twist you can change from a horizontal spray to a vertical spray
• A completely stainless steel and non-corrosive injector unit
• The highest grade of chemical resistance
• Easy to fill wide mouth bottle with fill markings
• Integrated injector (no additional injector required)

Concentration Rates
• Setting 1: 2 - 2.5%
• Setting 2: 4 - 4.5%
• Setting 3: 5 - 5.5%
• Setting 4: 6.5 - 7%
• Setting 5: 7.5 - 8%

See ST-73.2 in action on YouTube

See ST-73 in action on YouTube

Specifications
• Pressure: 1,000 - 4,350 PSI
• Flow Rate: 1.32 – 5.2 GPM
• Max Temp: 100° F.
• Inlet: 1/4" Female
• Bottle: 64 oz
• Weight: 1.20 lb

Suttner Injector Check Valve With Hose Barb "Extreme"

Parts Breakdown

Highest chemical resistance With o-ring

Suttner Dual ST-357 Turbo Nozzle Plough Jet. With 3/8"F Inlet & two 1/4"M Outlets and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• When fitted with two rear facing ST-357 rotating nozzles the small plough jet nozzle is the ideal solution for desilting drains and sewers
• The heavy forged brass construction keeps the jet firmly planted in the base of the pipe where the silt deposits collect and blasts them back towards the manhole
• Select turbo nozzle size symmetric according to pressure and flow rate of the machine

Specifications:
• Material: Forged brass and stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet: 3/8” Female
• Outlets (2): 1/4” Male
• Max Flow: 21.0 GPM
• Outside Diameter (O.D.): 3.46”
• Note: Requires (2) ST-357 1/4” turbo nozzles (Not Included)
• Weight: 2.45 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 3.0
• Max PSI: 5,070
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.90 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 3.5
• Max PSI: 5,070
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.90 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 4.0
• Max PSI: 5,070
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.90 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 4.5
• Max PSI: 5,070
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.90 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 5.0
• Max PSI: 5,070
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.90 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 5.5
• Max PSI: 5,070
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.90 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 6.0
• Max PSI: 5,070
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.90 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-456 Turbo / Rotating #7.0 Nozzle is rated for up to 5,070 PSI. The increased tearing action of the rotating spray is ideal for hard surface applications, such as concrete graffiti cleaning or caked mud on heavy equipment

Features
• Increases cleaning efficiency as much as 200%
• The 0° rotation creates a cleaning and tearing action
• Ideal for hard surfaces
• Improved materials for longer life

Specifications
• Nozzle Size # 7.0
• Max PSI: 5,070
• Max Temp.: 212° F
• Inlet: 1/4" Female NPT
• NOTE: All rotating nozzles should be started pointing downward
• Weight: 0.90 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner SA-3240 Stainless Steel Hydro Excavation Inline Spray Gun 3,200 PSI, 16 GPM with 1/2” FPT Inlet and 1/2” FPT Outlet

Features
• Safer than a ball valve
• Stainless steel spring, needle, ball and seat
• Stainless steel inlet connection, including inlet pipe
• Stainless steel outlet
• Forged brass valve body
• Impact resistant trigger guard
• Horizontal flow-through design

Specifications
• Max Pressure: 3,200 PSI
• Max Flow: 16.0 GPM
• Max Temp: 300° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• Weight: 1.70 lb

3/8” F Suttner #9.0 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 3/8” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 9.0 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” F Suttner #6.5 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 1/4” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 6.5 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

1/4” F Suttner #8.0 ST-49 Turbo Nozzle Driver With 4 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 4 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 1/4” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 8.0 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

3/8” F Suttner #6.5 ST-49 Turbo Nozzle Driver With 6 Rear jet inserts and rated to 5,076 PSI

Features:
• High Quality, German engineered components
• Turbo nozzle driver and ST-356 or ST-456 turbo nozzle are the perfect combination for drilling through blockages with its rotary forward facing jet
• Driven up to the blockage by 6 powerful rear facing hardened stainless steel nozzles the high speed forward facing spinning jet creates a cone shape that has enough cutting force to blast through roots and scale
• It is also ideal for cutting up and shredding tissue and fat deposits

Note:
• Above shown item (1st Picture) is for the driver portion only
• You will have to add the corresponding ST-357 or ST-456 turbo nozzle to complete the driver (2nd Picture)

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Inlet (Sewer Hose): 3/8” Female
• Outlet (Turbo Nozzle): 1/4” Male
• Nozzle Size: # 6.5 (With a #3.0 ST-357 or ST-456 nozzle)
• Note: Requires #3.0 ST-357 or ST-456 1/4” turbo nozzle (Not Included)
• Weight: 0.20 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart