Suttner America

Suttner ST-358 Sewer Jetting Turbo Nozzle 8.0, 5070 PSI, 1 Front Jet & 8 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 8
• Nozzle Size: # 8.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-358 Sewer Jetting Turbo Nozzle 5.0, 5070 PSI, 1 Front Jet & 5 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PS
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 5
• Nozzle Size: # 5.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner Mounting Bracket for Spray Guns / Lances

Features
• Wall mount for Suttner high pressure guns with lance or twin lance
• Perfect for mounting Suttner’s ST-175 foam to rinse lance

Specifications
• Material: Stainless steel
• Dimensions (L x W x D): 2.25 x 8.81 x 2.31 inches
• Weight: 0.85 lbs

Suttner ST-58 Change Over Valve 5,000 PSI 1/4" FPT. Suttner ST58 change-over design allows you to switch between lances and nozzles with a twist

Features
• Stainless steel
• No roll over nozzle
• Corrosive resistant

Specifications
• Max Pressure: 5,000 PSI
• Max Temp: 200° F.
• Inlet: 1/4" Female NPT
• Outlets (2): 1/4" Female NPT
• Weight: 0.85 lbs

Suttner ST-10 Nozzle Protector 1/4" F Grey & Black

Features
• 2-Component nozzle protector ST-10
• The ST-10 is the ideal combination made out of hard and soft plastics
• The nozzle protector is suitable for cold and hot water applications in the car wash, agriculture and food industry
• The ST-10 is unimpeachable, protects your nozzles and preserves the surfaces to be cleaned at the same time

Specifications
• Suitable for nozzles 1/4" M NPT
• Material: Plastic / Zinc-plated steel
• Color: Grey / black
• Max PSI: 5,800
• Max Temp: 300° F.
• Inlet:: 1/4" Female NPT
• Outlet: 1/4" Female NPT
• Note: 1/4” MPT Nozzle not included
• Weight: 0.10 lbs

Suttner ST-2305 Easy-Pull Spray Gun 5,000 PSI with KEW Coupler. Ideal for quick connecting different lances and accessories. Comfort technology designed "easy pull trigger" and comfort grip provide ease when working long hours

Features
• Swivel inlet for hose positioning
• Proper spray angle for optimal positioning of pressure points
• Forged brass housing for maximum strength
• The Easy-Pull trigger is designed for operators and applications with high-volume of trigger cycling
• The Easy-Pull trigger, German Engineered Technology reduces trigger pulling force by 60% compared to usual competitors spray gun

Specifications
• Max Pressure: 5,000 PSI
• Max Flow: 12.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" FPT
• Outlet: 1/4" FPT
• Weight: 1.73 lb

Suttner #4.5 ST-160.3A Extreme Air Assisted Stainless Steel Chemical Injector with 3 Pairs of Injectors & Nozzles. Injector for large water quantities and high dosages. Chemically resistant stainless steel 1.4305 / AISI 304 with compressed air connection and wall bracket

Features
• Extreme chemical injectors for PH Level 2.0 or below
• The stainless steel injector features three pairs of injector and nozzle in one housing which can be configured independently. This enables numerous metering and foam applications
• In order to produce large foam quantities in the low-pressure range, the injector is provided with an compressed air connection
• You can inject 3 of the same or three different cleaning agents at the same time
• Maximum draw rate per line is 7 – 8%
• Total injector draw rate will be 21% – 24%
• Each injector draw barb comes with a packet of dosing nozzles if you want to meter some of or all 3 draw lines

Specifications
• Nozzle/Orifice Size: 4.5
• Flow Rate: 1 - 24 GPM
• Pressure: 90 - 5,000 PSI
• Max Temp: 194° F.
• Inlet: 1/2” Female
• Outlet: 1/2” Female
• Air Connection: 1/4” Male
• Hose Barbs: .35” ID hose
• Note: Optimum foam created 130°F or less
• Weight: 3.55 lb

Please use Nozzle Chart to determine proper nozzle size

Note: If between sizes, choose the larger nozzle size

Nozzle Chart