Suttner America

Suttner ST-358 Sewer Jetting Turbo Nozzle 5.0, 5070 PSI, 1 Front Jet & 5 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PS
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 5
• Nozzle Size: # 5.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-358 Sewer Jetting Turbo Nozzle 6.0, 5070 PSI, 1 Front Jet & 6 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 6
• Nozzle Size: # 6.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-358 Sewer Jetting Turbo Nozzle 8.0, 5070 PSI, 1 Front Jet & 8 Rear Jets 1/4" F

Features:
• High Quality, Made In Germany
• Great nozzle for cutting, cleaning and removal
• Precision drilled rear drive jets
• All stainless steel construction

Suttner ST-358 Sewer Jetting Turbo Nozzle in Action on YouTube

Specifications:
• Material: Hardened stainless steel
• Maximum Pressure: 5,076 PSI
• Maximum Temperature: 212 ºF
• Inlet: 1/4” Female
• Front Jets: 1
• Rear Jets: 8
• Nozzle Size: # 8.0
• Weight: 0.61 lbs

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-35R Suction Strainer 1/2" or 3/4" Hose Barb With check valve. High volume suction strainer ideal for tank transfer or agricultural markets

Specifications:
• Impact resistant plastic housing
• Stainless steel screen
• Brass weight to hold in place
• With blue check valve
• Weight: 0.92 lbs

Suttner ST-35R Suction Strainer 3/4" or 1" Hose Barb With check valve. High volume suction strainer ideal for tank transfer or agricultural markets

Specifications:
• Impact resistant plastic housing
• Stainless steel screen
• Brass weight to hold in place
• With blue check valve
• Weight: 0.92 lbs

Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"

Suttner ST-36 Sludge Pump In Action on YouTube

Specifications
• Nozzle Size: 4.0 (0 degree)
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Hose Length: 15’
• Max Temp: 104° F.
• Inlet: 1/4" Male QC Plug
• Weight: 5.5 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"

Suttner ST-36 Sludge Pump In Action on YouTube

Specifications
• Nozzle Size: 4.0 (0 degree)
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Hose Length: 25’
• Max Temp: 104° F.
• Inlet: 1/4" Male QC Plug
• Weight: 8.5 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Suttner ST-36 Sludge Pump Casting with Hose Barb. Turns a pressure washer into a high output pump. Great for flood cleanup, car wash pits, draining pools or chemical spills

Features
• Water flowing through the high pressure nozzle creates a powerful venturi suction that vacuums up slurry solutions
• Debris as large as 3/4” will pass through the casting and out the discharge hose
• Vacuums up liquid slurries at a ratio of about 1:11 Example: Using 4 GPM will produce an output of 44 GPM
• Hose barb 1 1/2"
• Casting Only: Does not include 0 degree 1/4” MPT nozzle, coupling and hose

Suttner ST-36 Sludge Pump In Action on YouTube

Specifications
• Flow Rate: 11:1
• Max Pressure: 4,000 PSI
• Max Temp: 104° F.
• Inlet: 3/8" FPT
• Nozzle Port: 1/4" FPT
• Weight: 0.80 lb

Please use Nozzle Chart to determine proper nozzle size

Nozzle Chart

Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Adjustable handle
• Chemical resistant

Specifications:
• Length: 20"
• Pipe Material: Stainless steel
• Inlet: 1/2” Male NPT
• Outlet: 1/4” Female NPT
• Maximum Pressure: 8,700 PSI
• Max. Temp.: 300° F
• Weight: 2.35 lbs.

Features:
• High Quality, German engineered components
• Threads are rolled on providing consistent sealing and four times the strength than cut threads
• Adjustable handle
• Chemical resistant

Specifications:
• Length: 40"
• Pipe Material: Stainless steel
• Inlet: 1/2” Male NPT
• Outlet: 1/4” Female NPT
• Maximum Pressure: 8,700 PSI
• Max. Temp.: 300° F
• Weight: 3.0 lbs.

2"

Features
• High Quality, German engineered components
• Forged stainless steel housing, piston, and malleable seat
• Special heat and chemical resistant seals

Specifications
• Max Pressure: 8,700 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 1/2" Female NPT
• Outlet: 1/2" Female NPT
• Weight: 2.58 lb

Features
• High Quality, German engineered components
• Forged stainless steel housing, piston, and malleable seat
• Special heat and chemical resistant seals

Specifications
• Max Pressure: 8,700 PSI
• Max Flow: 21.0 GPM
• Max Temp: 300° F.
• Inlet: 3/8" Female NPT
• Outlet: 1/4" Female NPT
• Weight: 2.58 lb

Suttner ST-40 Brass Screw Coupler, 3/8" FPT x M22-15MM 5,800 PSI.

Features:
• Used anywhere high pressure connections are frequently connected and disconnected
• Exchanging different lance, hose and spray gun versions are simple and easy just by hand tightening
• Viton O-Ring

Specifications:
• Max. Pressure: 5,800 PSI
• Max. Temp: 300°
• Material: Brass & plated steel
• Inlet: 3/8” FPT
• Outlet: Female M22, Yoke/Stem: 15MM
• Weight: 0.22 lbs

Suttner ST-40 Stainless Steel Screw Coupling, 1/4" FPT x M22-14MM 7,250 PSI

Features:
• Food Grade stainless steel construction for chemical & food applications
• Ideal for connections that have to be changed
• Viton O-Ring

Specifications:
• Max. Pressure: 7,250 PSI
• Max. Temp: 300°
• Body Material: Stainless steel
• Inlet: 1/4” FPT
• Outlet: Female M22, Yoke/Stem: 14MM
• Weight: 0.24 lbs