Fimco Spare Parts

• Fimco Optional Accessorie for 3 Point Sprayers
• Hypro 6 roller pump with 1320-0022 coupler
• 540 RPM

The FIMCO 5275918 12V DC Variable Motor Speed Control Kit contains motor controller, motor controller motor cable and motor controller battery cable. Kit allows user control of the motor speed and control of the spread width from 5-45 feet. Can be used with 12V motors up to 10 AMPS. This replacement variable motor speed control kit can be used with FIMCO Dry Material Spreaders.

Product Features:
• 12V DC Variable Motor Speed Control Kit
• 20 foot wire harness with alligator clips
• Use with 12V motors up to 10 Amps
• OEM replacement part

The TeeJet TeeValve Manual Selector Control Valve allows user to open any three boom section lines in any desired combination. Raise and lower lever to open and close the valve without changing the indexed position. The aluminum construction with stainless steel and plastic internal parts offers maximum corrosion resistance. Built as a replacement TeeValve Manual Selector Control Valve for some FIMCO 3 Point Sprayers

Provides on/off control of a 3-section spray boom; left, center and right sections

Seven indexed positions for any possible combination; L, R, C, LC, LR, LCR and OFF

Fits FIMCO 110-300 gallon 3 point sprayers

The FIMCO 5157208 12V-10A Motor Controller for Dry Material Spreader has on/off switch and variable speed dial. Allows user to control the spread of width from 5 - 45 feet. This replacement motor controller can be used with FIMCO Dry Material Spreaders

Product Features:
• Controller only for FIMCO dry material spreaders
• OEM replacement part

18X850-8,4-PLY K500 KENDA SUPERTURF TIRE MOUNTED ON

The FIMCO 5275840 12V 5/16" Diameter Shaft Motor for Dry Material Spreaders is easy to install with the integral mounting studs. Replacement motor for all FIMCO Dry Material Spreaders.

Product Features:
• 12V motor for FIMCO dry material spreaders
• OEM replacement part

FIMCO 5275713 Complete Replacement Boomless Nozzles Left and Right (Pkg of 2)

• The FIMCO Complete Replacement Boomless Nozzle offers increased capacity with precise liquid application
• The polyacetal nozzle offers an on/off valve and tip
• Built to replace end nozzle on wet boom 3 nozzle FIMCO Sprayers
• Package of 2 Fimco # 5275122 end nozzles

Fimco Industries VOLT EDGE™ 20V-5.0AH-BAT. The Volt Edge 20V Replacement Battery represents a major step in 21st Century Lithium Ion Battery powered technology. Designed to extend your spraying time with a spare 20 Volt 5.0 Amp Hour Battery, this is an OEM interchangeable battery for Volt Edge sprayers and conversion kits. Innovation is everything and the Volt Edge Conversion Kit delivers the consistency, power and performance you need to get your work done

Features:
• 20 Volt Lithium Ion Battery provides on demand power when you need it most
• 5.0 amp hour battery can deliver up to 60 minutes of use spraying 60 gallons of liquid per charge

Specifications:
• Warranty: 1 yr Consumer / 90 day Commercial
• Power Supply: Lithium Ion Battery
• Compatible with the VOLT EDGE™ wireless battery system only
• Battery Pack 5164275
• Weight: 1.60 lbs

The FIMCO 5160003 Stainless Steel Dry Material Spreader Spinner controls the material being spread. It connects to the Pattern Adjusting Ring Weldment and the motor through the Motor Spindle to provide the spinning motion.

Product Features:
• Fits FIMCO dry material spreaders
• OEM replacement part

Fimco LAWN GUARD Lithium Ion Battery Powered Rechargeable Handgun / Pump. Easily Convert Your Pump Up Style Sprayer for Effortless Spraying. Roundup® Ready

Features;:
• No More Pumping – Rechargeable Lithium Ion Battery Diaphragm Pump Handgun
• 65 Minute Run Time
• Adjustable Nozzle From Straight Stream To Mist

Specifications:
• Flow: 0.2 GPM
• Vertical Spray Distance: 10’
• Horizontal Spray Distance: 20’
• Capacity: 13 Gallons per charge
• Run Time: 65 Minutes per charge
• Recharge TIme: 2.5 Hour
• Battery Charger: 3.6V
• Warranty: 1 Year (*90 DAY COMMERCIAL WARRANTY)
• Note: Sprayer & hose not included
• Weight: 2.25 lbs

Fimco Lower Valve Sub-Assembly for 5275260

FThe Pump Head for 2.4 High Flo Demand 12V Pump is the complete pump head which includes drive and valve assemblies and the diaphragm/piston/cam/bearing kit

• Fimco Model #: HFP-24060-113
• Fimco Pump #: 5281371, 5151087
• Replaces Fimco # 5168837

The FIMCO Valve Assembly Kit for 4.0 GPM High Flo Pro Series 12V Pump works with the drive assembly to create the pumping action for the pumps. Built to replace the valve assembly kit for the 4.0 GPM High Flo Pumps.

• OEM replacement part
• Works on Fimco High-Flo Models # 5151073, 5281326 & HFP-4.0

Fimco 4.5 GPM Pump Head W/ Pressure Switch, 60 PSI 12V HIGH-FLO Pump

• Fimco Model #: HFP-45060-113
• Fimco Pump #: 5281372, 5151088
• Replaces Fimco # 5168821

The FIMCO 5100316 Stainless Steel Wet Boom Tube for ATV Boomless Sprayer is built to allow direct attachment of nozzle assemblies. Replacement wet boom tube for FIMCO Boomless Sprayers.

Product Features

Fits FIMCO ATVBK-3025-QR boom kit

Fits FIMCO LG-3025-QR and LG-3025-PRO sprayers

OEM replacement part

FIMCO 5278138 ATV 3025 5 Piece Bracket Kit

Contents of Bracket Kit #5278138

• (2) Fimco Part # 5278222 ATV Quick Release Bracket Assembly
• (2) Fimco Part # 5038873 Quick Release Boom Mount Bracket
• (1) Fimco Part # 5020570 Hose, 1/2"-1 x 48"

The FIMCO Wheel 15/600 x 6 2-Ply Turf with 3/4" Bearing pneumatic tire is the perfect replacement for FIMCO Trailer Dry Material Spreaders. The knobby all-terrain tread is suitable for lawn and garden applications. Built with a metal hub for strength and durability.

FIMCO 5275122 Complete Replacement Boomless Nozzle Left or Right

• The FIMCO Complete Replacement Boomless Nozzle offers increased capacity with precise liquid application
• The polyacetal nozzle offers an on/off valve and tip
• Built to replace end nozzles on wet boom 3 nozzle FIMCO Sprayers

The FIMCO 16 x 6.5-8 Turf Tire 2-Ply 3" Silver Wheel pneumatic tire is the perfect replacement for FIMCO products. The knobby all-terrain tread is suitable for lawn and garden applications. Built with a metal hub for strength and durability

The FIMCO Valve Assembly Kit for 2.2 GPM High Flo Pro Series 12V Pump works with the drive assembly to create the pumping action for the pumps. Built to replace the valve assembly kit for the 5151075 FIMCO Pump.

• OEM replacement part
• Works on Fimco High-Flo Models # 5151075, 5281325 & HFP-2.2

The FIMCO 5157053 Battery 12V 7.5 Amp Hour is a replacement rechargeable battery for FIMCO 5 Gallon Wheeled Spot Sprayer.

• Mfg #: SP12-7.5 (T1)
• Fits FIMCO LG-5-P spot sprayer
• OEM replacement part

The FIMCO 45 PSI Pressure Switch will shut off your pump when flow is stopped. Built to replace the pressure switch for 4.0 GPM High Flo Pro Series Pumps.

• OEM replacement part
• Works on Fimco High-Flo Models # 5151073, 5281326 & HFP-4.0

The FIMCO Drive Assembly for 4.0 GPM High Flo Pro Series 12V Pump is designed to function with the valve assembly and draw fluid from the tank to provide spray solution to the boom or hand gun.

• OEM replacement part
• Works on Fimco High-Flo Models # 5151073, 5281326 & HFP-4.0

FIMCO 5275123 Complete Replacement Boomless Nozzle Center

• The FIMCO Complete Replacement Boomless Nozzle Center is the hose interface and nozzle for your wet boom center section
• The polyacetal nozzle offers an on/off valve
• Built to replace nozzle on FIMCO Broadcast Boomless Sprayers

Fimco 1.2 GPM Pump Head W/ Pressure Switch, 60 PSI 12V HIGH-FLO Pump

• Fimco Model #: HFP-12060-111
• Fimco Pump #: 5281370, 5151086
• Replaces Fimco Part # 5275531

Fimco 4.5 GPM Diaphragm/Piston/Cam/Bearing Kit, 60 PSI 12V HIGH-FLO Pump

• Fimco Model #: HFP-45060-113
• Fimco Pump #: 5281372, 5151088

The FIMCO Check Valve Kit for 4.0 GPM High Flo Pro Pumps works with the diaphragm/piston/cam bearing kit to create the pumping action for the pumps. Built to replace the check valve assembly for the 4.0 GPM High Flo Pro Pumps.

• OEM replacement part
• Works on Fimco High-Flo Models # 5151073, 5281326 & HFP-4.0

The FIMCO Telescopic Wand can extend from 51 to 80 inches and is great for trees, houses, barns and other hard to reach places. The wand has a 3/8 inch hose barb connection and a maximum operating pressure of 100 PSI with a lockable trigger for convenient continuous operation. Made with an aluminum lance, adjustable pattern tip and adjustable polymer this wand is compatible with most 12V sprayers.

Features:
• 80" Telescopic wand is corrosion resistant providing years of dependable use
• Adjustable spray pattern from fan to cone gives you the coverage you want
• Ergonomic design with steel lever and polymer handle are easy to use
• Integrated trigger lock relieves stress and provides constant pressure and spray
• Inlet Connection: 3/8” Hose barb
• Weight: 1.25 Lbs

Features:
• Adjustable nozzle on hand gun, from cone spray to straight stream
• 15’ of 3/8” Spiral coiled hose
• Lever action hand gun
• Aluminum extension is 19” long with a 30° offset tip
• Trigger locks for continuous operation
• Weight: 1.25 lbs

The FIMCO 100 PSI Pressure Switch will shut off your pump when flow is stopped. Built to replace the pressure switch for the 2.2 GPM High Flo Pro Series 12V Pumps.

• OEM replacement part
• Works on Fimco High-Flo Models # 5151075, 5281325 & HFP-2.2

The FIMCO Dry Material Spreader Spindle connects to the 12 Volt Motor 5/16" Diameter Shaft to the Spinner. Built to replace the spreader spindle on FIMCO Dry Material Spreaders

Features
• Fits all FIMCO dry material spreaders
• OEM replacement part

The FIMCO Quick Release Retention Bracket Assembly connects to the tank on FIMCO ATV Sprayers and holds the Quick Release Boom Mount Bracket to hold up boom mount assembly.

Fits FIMCO ATV-QR series sprayers and ATVBK-QR boom kits

OEM replacement part

• Upper Housing Assembly, 100 PSI Fimco Pro Series 2.2 GPM Pumps
• Works on Fimco High-Flo Models # 5151075, 5281325 & HFP-2.2

Fimco 10' Heavy Duty 14 GA Lead Wire On/Off Switch & Deluxe Battery Clips

FEATURES:
• 10’ Heavy Duty
• 14 Gauge Lead Wire
• Quick Coupler
• In-Line Switch
• Deluxe Battery Clip

The FIMCO 410/350 x 6" Silver Wheel with 2-1/4" Offset and 5/8" Bearing pneumatic tire is the perfect replacement for FIMCO Trailer Sprayers. The knobby all-terrain tread is suitable for lawn and garden applications. Built with a metal hub for strength and durability.

FIMCO’s Tank Cleaner and Neutralizer will maximize the life of your sprayer by effectively cleaning and neutralizing your sprayer tank, pump and plumbing components. The completely soluble powder removes dirt, scale and rust from spray booms and tanks as well as neutralizes the spray chemicals previously used in your equipment. To reduce corrosion in tanks and pumps we recommend flushing sprayers with our cleaner and neutralizer after each

Features:
• Cleans seals and valves ensuring longer pump life
• Completely water soluble and dissolves easily ensuring the removal of all contaminates
• Neutralizes harsh chemicals that would otherwise damage your tank
• Removes dirt, scales and grime from tanks preventing cross contamination
• Weight: 2 lbs

The Upper Housing for 4.0 GPM High Flo Pro Series 12V Pump with 1/2" MNPT Ports works with the valve assembly and drive assembly to create the pumping action for the pumps. Built to replace the upper housing for the 5151073 Pump.

• OEM replacement part
• Works on Fimco High-Flo Models # 5151073, 5281326 & HFP-4.0

Fimco 2.4 GPM Diaphragm/Piston/Cam/Bearing Kit, 60 PSI 12V HIGH-FLO Pump

• Fimco Model #: HFP-24060-113
• Fimco Pump #: 5281371, 5151087
• Replaces Fimco part # 5168838

Fimco Removable Wand for Lithium Ion Battery Powered Spray Gun, LG-4-3-1, LG-10-EC-LI

The FIMCO 5020479 Black Coiled 3/8"ID PU Type Hose x 15' is primarily used for spot spraying in tight areas around buildings and other obstacles. The coiled construction prevents kinking and is built to withstand wear and tear from heavy use and harsh chemicals. Replacement hose on FIMCO 8 Gallon Spot Sprayer.

• Fits FIMCO LG-8-P sprayer
• OEM replacement par
• Hose (in. x ft.)3/8 x 15

The Fimco High Flo Check Valve for 3.8 and 4.5 GPM Pumps creates the pumping action for the pumps. Built to replace the check valve assembly for the 3.8 and 4.5 GPM High Flo Pumps.

• Works on Fimco Models # 5275498, 5275704, 5277982, 5275088, 5281372, 5151088

• Fimco Gold Series pressure switch assembly

• Works on Fimco 60 PSI Models # 5275497, 5275703, 5277981, 5275087

Fimco 5143544 2.1 & 2.4 GPM Check Valve Assembly, 60 PSI 12V HIGH-FLO Pump.

Product Description:
• The High Flo Check Valve for 2.1 and 2.4 GPM Pumps creates the pumping action for the pumps
• Built to replace the check valve assembly for the 2.1 and 2.4 GPM High Flo Pumps

Product Features:
• Fimco Model #: HFP-24060-113
• Fimco Pump #: 5281371, 5151087
• Replace Fimco # 5168820 Works on older Fimco 60 PSI Models # 5275497, 5275703, 5277981, 5275087, 5275016

Fimco 1.2 & 4.5 GPM Pressure Switch Assembly, 60 PSI 12V HIGH-FLO Pumps

• Fimco Model #: HFP-12060-111 & HFP-45060-113
• Fimco Pump #: 5281370, 5151086, 5281372, 5151088
• Replaces Fimco 5157201 - 35 PSI Models # 5275496, 5275702, 5277980, 5275086
• Replaces Fimco 5157203 - 45 PSI Models # 5275498, 5275704, 5277982, 5275088

7771786