Fairview USA Inc.

Accutek® QD-ISOAC16-16F 1 Coupler x 1 Female Pipe ISO Series A 7241-1 Steel 3,000 PSI Quick Disconnect. Fairview's ISO A Interchange Couplers Interchange with Aeroquip 5600, Parker 6600, Safeway S56 and Faster ANV Series

Features:
• Industry interchangeability with other manufacturer's ISO "A" couplers and nipples
• High Strength Steel Construction
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Hydraulic applications where connection and disconnection is required either for maintenance or operation
• For use on truck & trailer, snow plows, agricultural, dump, construction equipment

Specifications:
• Working Pressure: 3,000 PSI
• Body Size: 1
• Female Pipe: 1
• Body Material: Steel
• Temperature Range: -40F to 250F
• Approx. Weight: 1.65 lbs

Fairview GAS-FLO™ BV2103-H 1" FPT Forged Brass Ball Valve 600 WOG, 150 WSP. Fairview's Forged Brass Ball Valves are full port and CSA, CGA & UL certified

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• Brass valves for use in W.O.G. = Water, Oil and Gas; W.S.P. = Working Steam Pressure applications
• Two piece Body
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA - ANSI Z21.15/CGA 9.1, ASME B16.44, CGA CR 91-00
• CAN/CGA 3.16, ASME B16.33 & ASME B16.38
• UL 842 (MHKZ): Manual valves-250 psi

Specifications:
• W.O.G: 600
• W.S.P: 150
• Pipe Size: 1” FPT
• Connection Type: Female to Female
• Materials: Brass C3700, Chrome & Nickel Plated Steel, PTFE
• Weight: 1.05 lbs

Accutek® S1003-H Steel Female Hex Coupling 1 Female Pipe x 1 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 2,000 PSI
• Burst Pressure: 8,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.50 lbs

Fairview 125-16H 1 Hose ID x 1 Male Pipe Brass Hose Barb Fitting. Brass hose barbs are recommended for general purpose air, water and other low pressure applications. CA360 brass construction prevents rust and corrosion

Specifications:
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• All hose barbs must be firmly fastened with hose clamps or ferrules
• Weight: 0.34 lbs

Fairview 125-16E 1 Hose ID x 3/4 Male Pipe Brass Hose Barb Fitting. Brass hose barbs are recommended for general purpose air, water and other low pressure applications. CA360 brass construction prevents rust and corrosion

Specifications:
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• All hose barbs must be firmly fastened with hose clamps or ferrules
• Weight: 0.25 lbs

Fairview 121-H 1 MPT Brass Cored Hex Head Plug. Fairview's Plug Hex Head Cored Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.40 lbs

Accutek® S1016-H Steel 90° Street Elbow 1 Male Pipe x 1 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 2,000 PSI
• Burst Pressure: 8,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 1.20 lbs

Accutek® S1022-HE Steel Male Hex Nipple 1 Male Pipe x 3/4 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 2,000 PSI
• Burst Pressure: 8,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.44 lbs

Accutek® S1010-HC Steel Hex Bushing 1 Male Pipe x 3/8 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 2,000 PSI
• Burst Pressure: 8,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.40 lbs

Accutek® QD-ISOAN16-16F 1 Nipple x 1 Female Pipe ISO Series A 7241-1 Steel 3,000 PSI Quick Disconnect. Fairview's ISO A Interchange Couplers Interchange with Aeroquip 5600, Parker 6600, Safeway S56 and Faster ANV Series

Features:
• Industry interchangeability with other manufacturer's ISO "A" couplers and nipples
• High Strength Steel Construction
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Hydraulic applications where connection and disconnection is required either for maintenance or operation
• For use on truck & trailer, snow plows, agricultural, dump, construction equipment

Specifications:
• Working Pressure: 3,000 PSI
• Body Size: 1
• Female Pipe: 1
• Body Material: Steel
• Temperature Range: -40F to 250F
• Approx. Weight: 0.60 lbs

Fairview BV4103-H 1" NPTF Forged Brass Ball Valve 600 WOG. Fairview's Forged Brass Ball Valves are full port, feature brass balls and fine NPTF threads

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• Brass valves for use in W.O.G. = Water, Oil and Gas
• Two piece Body
• Full Port
• Blowout-Proof Stem
• PTFE Seats

Specifications:
• W.O.G: 600
• Pipe Size: 1” NPTF
• Connection Type: Female to Female
• Materials: Brass C3700, Nickel Plated Steel, PTFE
• Operating temperature: -40°F to 356°F (-40°C to 180°C)
• Weight: 1.02 lbs

Accutek® QD-AGC8-8F 1/2 Coupler x 1/2 Female Pipe Agricultural (Pioneer 4000) Interchange Steel 3,600 PSI Quick Disconnect. Fairview's Agricultural Interchange Couplers Interchange with Pioneer 4000, Safeway S20 and S40 Series

Features:
• High Strength Steel Construction
• Superior "Poppet" style valves
• Nitrile NBR seals with PTFE back-up ring
• Typical applications include agricultural equipment, gravel trucks and dump trucks

Specifications:
• Working Pressure: 3,600 PSI
• Body Size: 1/2
• Female Pipe: 1/2
• Body Material: Steel
• Sleeve Style: Two Way
• Approx. Weight: 0.66 lbs

Accutek® QD-ISOAC8-8F 1/2 Coupler x 1/2 Female Pipe ISO Series A 7241-1 Steel 4,000 PSI Quick Disconnect. Fairview's ISO A Interchange Couplers Interchange with Aeroquip 5600, Parker 6600, Safeway S56 and Faster ANV Series

Features:
• Industry interchangeability with other manufacturer's ISO "A" couplers and nipples
• High Strength Steel Construction
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Hydraulic applications where connection and disconnection is required either for maintenance or operation
• For use on truck & trailer, snow plows, agricultural, dump, construction equipment

Specifications:
• Working Pressure: 4,000 PSI
• Body Size: 1/2
• Female Pipe: 1/2
• Body Material: Steel
• Temperature Range: -40F to 250F
• Approx. Weight: 0.60 lbs

Accutek® QD-BISOBC8-8F 1/2 Coupler x 1/2 Female Pipe ISO Series B 7241-1 Brass 3,500 PSI Quick Disconnect. Fairview's ISO B Interchange Couplers Interchange with Aeroquip FD45, Foster FHK, Parker 60, Safeway BS10 and Faster HNV Series

Features:
• High flow characteristics and pressure ratings superior to Parker 60 series
• Industry interchangeability with other manufacturer's ISO "B" couplers and nipples
• Poppet style double shut-off.
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Ideal for use with hydraulic and other fluids in both stationary and mobile industrial applications

Specifications:
• Working Pressure: 3,500 PSI
• Body Size: 1/2
• Female Pipe: 1/2
• Body Material: Brass
• Approx. Weight: 0.75 lbs

Accutek® QD-ISOBC8-8F 1/2 Coupler x 1/2 Female Pipe ISO Series B 7241-1 Steel 4,000 PSI Quick Disconnect. Fairview's ISO B Interchange Couplers Interchange with Aeroquip FD45, Foster FHK, Parker 60, Safeway BS10 and Faster HNV Series

Features:
• High flow characteristics and pressure ratings superior to Parker 60 series
• Industry interchangeability with other manufacturer's ISO "B" couplers and nipples
• Poppet style double shut-off.
• Nitrile NBR seals with PTFE back-up ring
• Proven ball lock mechanism
• 4 : 1 safety factor (Min. Burst = WP. X 4)
• Ideal for use with hydraulic and other fluids in both stationary and mobile industrial applications

Specifications:
• Working Pressure: 4,000 PSI
• Body Size: 1/2
• Female Pipe: 1/2
• Body Material: Steel
• Approx. Weight: 0.81 lbs

Fairview 198-D 1/2 Female NPT x 3/4 FGH Brass Coupling. Fairview's Female Pipe X Female Coupling Water Hose Fittings are Made with Solid Industrial Quality Brass

Specifications:
• Material: Brass
• Weight: 0.13 lbs

Fairview 197-D 1/2 Female NPT x 3/4 MGH Brass Coupling. Fairview's Female Pipe X Male Coupling Water Hose Fittings are Made with Solid Industrial Quality Brass

Specifications:
• Material: Brass
• Weight: 0.10 lbs

Fairview 199S-D 1/2 Female NPT x 3/4 Swivel FGH Brass Coupling. Fairview's Female Pipe X Female Swivel Coupling Water Hose Fittings are Made with Solid Industrial Quality Brass

Specifications:
• Material: Brass
• Weight: 0.16 lbs

Accutek® S1005-D Steel 45° Elbow 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.26 lbs

Accutek® S1000-D Steel 90° Elbow 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.37 lbs

Fairview 108-D 1/2 FPT Brass Cap. Fairview's Cap Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.09 lbs

Fairview 103-D 1/2 FPT Brass Coupling. Fairview's Coupling Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.14 lbs

Fairview 104-D 1/2 FPT x 1/2 FPT Brass Union Coupling. Fairview's Union Coupling Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.40 lbs

Accutek® S1002-D Steel Female Pipe Cross 1/2 Female Pipe x 1/2 Female Pipe x 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.60 lbs

Fairview X100-D 1/2 FPT Extruded Brass 90° Elbow. Fairview's Extruded 90° Elbow Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas, LP-Gas to 1,200 PSI WP

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Extruded brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.35 lbs

Fairview X102-D 1/2 FPT x 1/2 FPT x 1/2 FPT x 1/2 FPT Extruded Brass Cross. Fairview's Extruded Cross Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Extruded brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.52 lbs

Fairview X101-D 1/2 FPT x 1/2 FPT x 1/2 FPT Extruded Brass Tee. Fairview's Extruded Tee Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Extruded brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.41 lbs

Fairview GAS-FLO™ BV2103-D 1/2" FPT Forged Brass Ball Valve 600 WOG, 150 WSP. Fairview's Forged Brass Ball Valves are full port and CSA, CGA & UL certified

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Features:
• Brass valves for use in W.O.G. = Water, Oil and Gas; W.S.P. = Working Steam Pressure applications
• Two piece Body
• Full Port
• Blowout-Proof Stem
• PTFE Seats
• CSA - ANSI Z21.15/CGA 9.1, ASME B16.44, CGA CR 91-00
• CAN/CGA 3.16, ASME B16.33 & ASME B16.38
• UL 842 (MHKZ): Manual valves-250 psi

Specifications:
• W.O.G: 600
• W.S.P: 150
• Pipe Size: 1/2” FPT
• Connection Type: Female to Female
• Materials: Brass C3700, Chrome & Nickel Plated Steel, PTFE
• Weight: 0.31 lbs

Accutek® S1001-D Steel Female Tee 1/2 Female Pipe x 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.44 lbs

Accutek® S1003-D Steel Female Hex Coupling 1/2 Female Pipe x 1/2 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.23 lbs

Accutek® S1020-DD Steel Adapter 1/2 Female Pipe x 1/2 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.27 lbs

Fairview 120-DD 1/2 FPT x 1/2 MPT Brass Adapter. Fairview's Adapter Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.11 lbs

Fairview X115-D 1/2 FPT x 1/2 MPT Extruded Brass 90° Street Elbow. Fairview's Extruded 90° Street Elbow Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas, LP-Gas to 1,200 PSI WP

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Extruded brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.25 lbs

Fairview X107-D 1/2 FPT x 1/2 MPT x 1/2 FPT Extruded Brass Street Tee. Fairview's Extruded Street Tee Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Extruded brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.40 lbs

Fairview 119-DB 1/2 FPT x 1/4 FPT Brass Reducing Coupling. Fairview's Reducing Coupling Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.10 lbs

Accutek® S1003-DB Steel Female Hex Coupling 1/2 Female Pipe x 1/4 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.28 lbs

Accutek® S1020-DB Steel Adapter 1/2 Female Pipe x 1/4 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.26 lbs

Fairview 120-DB 1/2 FPT x 1/4 MPT Brass Adapter. Fairview's Adapter Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.08 lbs

Fairview 119-DA 1/2 FPT x 1/8 FPT Brass Reducing Coupling. Fairview's Reducing Coupling Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.20 lbs

Accutek® S1000-DC Steel 90° Elbow 1/2 Female Pipe x 3/8 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.44 lbs

Fairview 119-DC 1/2 FPT x 3/8 FPT Brass Reducing Coupling. Fairview's Reducing Coupling Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

TECHNICAL DATA SHEET

INSTALLATION DATA SHEET

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.20 lbs

Accutek® S1003-DC Steel Female Hex Coupling 1/2 Female Pipe x 3/8 Female Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.25 lbs

Accutek® S1020-DC Steel Adapter 1/2 Female Pipe x 3/8 Male Pipe Hydraulic Fitting. Fairview's SAE steel pipe fittings create a stress-generated seal.

Specifications:
• Applications - Water, Oil, Air
• Working Pressure: 3,000 PSI
• Burst Pressure: 12,000 PSI
• Working Temperature: -65°F (-54°C) to 250°F (120°C)
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.25 lbs

Fairview 120-DC 1/2 FPT x 3/8 MPT Brass Adapter. Fairview's Adapter Brass Pipe Fittings are excellent for use with Water, Oil, Air, Natural Gas, LP-Gas, LP-Gas to 1,200 PSI WP

Specifications:
• Use with Brass, Steel, Iron Pipe
• Working Pressure: 1,200 PSI
• Burst Pressure: 5,000 PSI
• Material: Brass
• Pipe threads must be sealed using approved thread sealant
• Weight: 0.12 lbs

Fairview 729-8 1/2 Hose ID Brass Grip-Tite Hose Splicer. Grip-Tite Push-On style brass hose barbs are recommended for general purpose air, fuel, lube, Oil Lines, water and other low pressure applications. CA360 brass

Specifications:
• Working Pressure: 300 PSI
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• When used with Grip-Tite or similar push-on hose, no clamps are needed
• Weight: 0.08 lbs

Fairview 129-8 1/2 Hose ID Brass Hose Barb Splicer. Brass hose barbs are recommended for general purpose air, water and other low pressure applications. CA360 brass construction prevents rust and corrosion

Specifications:
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• All hose barbs must be firmly fastened with hose clamps or ferrules
• Weight: 0.06 lbs

Fairview 726-8D 1/2 Hose ID x 1/2 Female Pipe Brass Grip-Tite Fitting. Grip-Tite Push-On style brass hose barbs are recommended for general purpose air, fuel, lube, Oil Lines, water and other low pressure applications. CA360 brass

Specifications:
• Working Pressure: 300 PSI
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• When used with Grip-Tite or similar push-on hose, no clamps are needed
• Weight: 0.14 lbs

Fairview 126-8D 1/2 Hose ID x 1/2 Female Pipe Brass Hose Barb Fitting. Brass hose barbs are recommended for general purpose air, water and other low pressure applications. CA360 brass construction prevents rust and corrosion

Specifications:
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• All hose barbs must be firmly fastened with hose clamps or ferrules
• Weight: 0.12 lbs

Fairview 139-8D 1/2 Hose ID x 1/2 Male Pipe Brass 90° Elbow Hose Barb Fitting. Brass hose barbs are recommended for general purpose air, water and other low pressure applications. CA360 brass construction prevents rust and corrosion

Specifications:
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• All hose barbs must be firmly fastened with hose clamps or ferrules
• Weight: 0.12 lbs

Fairview 725-8D 1/2 Hose ID x 1/2 Male Pipe Brass Grip-Tite Fitting. Grip-Tite Push-On style brass hose barbs are recommended for general purpose air, fuel, lube, Oil Lines, water and other low pressure applications. CA360 brass

Specifications:
• Working Pressure: 300 PSI
• Working Temperature: -40°F to +220°F, -40°C to +104°C
• Weight: 0.14 lbs